If the holes are not factory then I deduct 40-50%. Over the years I have watched the auctions and if someone is collecting they will purchase in this range. If just to have one or for a shooter price usually only varies about 20%.

Dusty: I believe I still have one. email me fjhutton@mindspring.com If you are still looking.

email me; fjhutton@mindspring.com if you are still looking. I still may have Winchester Factory Original left.

I sent email with mailing address. My email is fjhutton@mindspring.com if you need it. Any problems let me know. Thanks again

I sure could use one if it is still available. Thanks

Check the serial number etc. to make sure it is the first issue of the Classic. If it is the later Classics issued then it is a toss up. It will depend on overall condition, bbl. length, type of buttplate etc. Good Luck

I have 5 of these early classics. Pete is correct as they were manf. only 2 years 1985-1987 and they have the 23-1/2"barrels with pistol grip stock. These early ones were sure finished nice.

Great: I would like to enter.

Griff: The spring in your picture is for the Pre-64, part #7394. The one after that is part #7394X and was a flat type. Then they went to part #7494X which is flat with a V on the end. Hope this may help. :) :) ***** Well I should have read the bottom of your response. Boy this old age is getting wo...

I may have the part you need. There are 3 differet styles that I know of. email me if you are still looking.

sixgun: Email me your address and phone number as I am going to be thru Morrison in about a week. I have a couple SRC in your serial number range and would sure be interested in looking at yours if that is okay. Let me know..

I have one of these elevators and it is Winchester Factory Original. email me if you are still looking.

I might add that yours is a Winchester Sporting Carbine. I have two of these in your serial number range complete with factory boxes which state they are a sporting carbine. I used to have one of these and the barrel wasnt dovetailed. However you could order one from Winchester in any configuration....

You can take a regular tube and cut it down on the receiver end to the length you need. Your gunsmith should be able to do this on his lathe. Good Luck

3T is correct. The older 94s you could get various thickness for the Locking Bolt #5094 or #5194 complete. They usually have the thickness stamping on the Locking Bolt.

The older Winchester Original saddle ring was approx. 1"dia. and thickness was 1/8". I still have some Factory Originals and just measured them for you. If you need any further info feel free to send me an email.

Now I know why I visit this site each day. great stuff.

Cody lists a s/n of 85741 manf. 4-24-1900 so yours should be in 1900. Thats a nice rifle so acquire the letter. I have two like yours in 25-35 and 30WCF and a deluxe with all the bells and whistles on it in 25-35 but mine were manf later and Cody has no records. I hope to get my new computor so I wi...

Cody records show Pre-1898 1894's from serial #1 thru #53941. Go for the Cody letter as it is well worth it.

What is the serial number? and what price are you at. I understand there were only a few in the U.S. as they were made for Canadian Sales but a few were sold in U.S. and are somewhat scarce in the low serial numbers. It was made in 1977 (under 5000 mfg)so you could get the Cherokee to go along with ...

jdad: Great!! that is what I have been looking for and I have a copy somewhere so this will work just fine.

Thanks again
Frank

I have Stroebels book but I havent found where it shows the markings on the tang sight, unless my ole eyes are really going.

Appreciate the reply. Info helps as I still havent found my old list so am starting a new one.

I got a large box of odds and ends at a yard sale and in the bottom was these tang peep sights: #l: Marbles "Marble" Gladstone,Mich. w/ W1 on the bottom. #2. Lyman "Lyman - "Pat" May 6.84 w/WS on the bottom. #3. Lyman Still New in the Box,(Black w/creme colored on top and en...

If for vehicle try Big Sky Racks at 406-586-9393. Their racks will accomodate just about any vehicle.

What is the serial number?

For your info those you mention as Eastern Carbine are really Sporting Carbines. I have 4 that range from 30s to late 40s still with original boxes and the Winchester end label shows Winchester "Sporting Carbine.

Colt SAA Manf: 1905. Good luck

email me on the parts you need.

I have the Factory Original one if you are still looking. Majority of the others are repros!!! email me if interested.

I have a couple of 1894 carbines made in late 20's to late30's and they have the shotgun steel buttplate, no saddlering, with Factory Original boxes and the label stating 20" SPORTING CARBINE.!!!!! Im sorry but at present time I am unable to give pictures. Have a new computor on the way.

Well it was at auction and it went for $1600 and I didnt get it. I have been looking at many places and the ones with the low serial numbers are all from $1300 and up. I found out they were $750 when the factory brought them out. Oh well always another day. Thanks for all the replys.

Can anyone give me as estimated value on the Oliver F.Winchester 38-55 NIB w/serial number 1xxx. Appreciate any info.