Paco Kelly's Leverguns.com

earlmck

as for hissbola, when God's hand is on Israel, NO ONE can stand up to them, there's a multitude of examples in Scripture that validates this, it's HisStory - - - I dunno Grizz -- watching Israel's war on women and kids -- I think maybe they got tired of waiting on God and so they threw in with the ...

earlmck

Bullet casting is one of my favorite "Fun Things" -- usually fun and occasionally a bigger adventure than you really wanted. My biggest (mis)-adventures happened back in those good old days when you got wheel weights that were dependably lead for a few cents per pound. I seldom cast them i...

earlmck

He said there were really three possibilities. One was that it was simply a coincidence, and such things happen. One was that there had been heightened warnings, and it was simply stupidity, with a miss guided to make things more secure that backfired. And the third was that it was a way to make su...

earlmck

That's interesting Yooper. I at one time had a full box of those cartridges but being a kid at the time I just shot 'em up. And never saw another factory load. I looked in QuickLoad and QL thinks that charge of 2400 would produce 24k psi (higher than recommended for the 1873 or old Colt revolvers bu...

earlmck

Well there wasn't a treaty as such -- it was leader-to-leader assurances that our side was smart enough to know not to step on the Russian toes by expanding NATO and putting missiles on their borders. And then we elected new leaders who were dumb enough to start doing just that. The Deep State/Milit...

earlmck

Bret Weinstein who does the "Darkhorse" podcast (that I catch on Rumble) also posted a tribute to Paul a few days ago. This was most entertaining to me because Prof. Weinstein readily admits that not many years ago he was an anti-gun democrat until life whacked him up alongside the head a ...

earlmck

As my eyes have aged over these past 80 years I have noticed major shifts in what iron sights work best for me. Used to be a tang sight with one of those aperture sights up front was totally wonderful. As the eyes aged that combo has become the worst for me and I am now gravitating toward barrel mou...

earlmck

Congratulations Earl! As John says, that's time well spent with grandsons indeed. 8) I have only had Lyman and RCBS lubrisizers but always admired the Star. I got the Star years ago when I was shooting revolvers a lot and being able to triple my lubed bullets/hour seemed important to a guy who was ...

earlmck

A grandkid called me yesterday, said if I was going to be around he would bring his older brother and they would like to do some bullet casting and lube-sizing. Holy smokes! Of course I was "going to be around". In fact to gainfully employ two fellows I needed a head start so I fired up th...

earlmck

That has to be good news for us reloaders. May they get up and running with a prosperous operation!

earlmck

Now I really like that!

I could use several of those. But if you tell us they are rare, I'm sure they are RARE!

earlmck

A little off topic , but what ever came of the MARLIN JAM I heard so much about years ago ? AKA "Letting two in". That's a good question, hopefully they've solved the issue on the re-engineered new production. I've only encountered it once, on a stainless Guide Gun belonging to a friend w...

earlmck

I gather the video comes out in September. Sounds like it'll be worth watching.

earlmck

Earl, any chance those four were twice- or thrice-fireds that had work-hardened at the mouths? I wonder if annealing would have helped. Really pleased that you'll have one of your grandsons along! It's a healthy addiction for a young man to acquire. 8) Hmmm... Hadn't thought of that ... yes, that's...

earlmck

I have a little addition to the 40/65 story. Last week a fellow on "Castboolits" advertised a nice batch of once-fired 45/70's for sale. I jumped on them and they showed up yesterday. Amongst the batch were 24 Hornady brand and sure enough, they were quite a bit short of regular; 2.03"...

earlmck

I have the RCBS Cowboy 410 - .40/65 die set, also. So I have a question to anyone with these specific RCBS Cowboy Dies. What is the diameter of your expander stem? Well smith, since they are right handy I went out and got out the micrometer. My RCBS Cowboy dies use the same .406 expander as your se...

earlmck

I have a buffalo silhouette match coming up this weekend for which I need a bit over a hundred rounds of ammo. I did not have that many cases in cal 40/65 so knew I needed to make some out of 45/70 but kinda' put it off until I "got around tuit". You know how that is. Grandson had found a ...

earlmck

Real fine haul there Steve. 30 years ago I lived in Carson City NV and could stop by the public range on my way home from work. I have a lifetime supply of 30/30, 30/06, 357, 44 mag, 45 auto. Never even thought of picking up other brass for the resale. I coulda' retired a year sooner on the 9mm and ...

earlmck

Some years ago I did some primer sensitivity testing. Federals were easiest to ignite, Remington hardest by a significant margin, and Winchester and CCI in the middle. And I at one time had some failures of Winchester small pistol primers to ignite H110 in my 357 revolver (for which magnum primers w...

earlmck

Earl, I immediately thought of the COSSA quarter-bore shoot when I saw it. :lol: And it's getting to be our most competitive event. Two of the newer Marlins, a winchester single-shot with custom barrel, a Stevens 44 in 25ss, dad's old m92 that seldom misses, and the m92 32/20 with re-lined barrel I...

earlmck

Re-education is pretty mild. We've got one old kid in prison 'cause he re-tweeted something making fun of Hillary. And we bankrupted Alex Jones 'cause we didn't like what he said on-line. And de-platformed/de-monetized a whole slew of folks critical of the establishment narrative on Covid or Electio...

earlmck

Dang but that would create a sensation on the line at our quarter-bore shoot. Bee-yootiful!

earlmck

1800 yards is a heckuva long way to try to hit with the old blackpowder babes if the wind is blowing the least little bit (which it obviously was here). In our BPCR shoot our farthest target is a 4X8 buffalo at 1200 yards. We give out a "pin" award for 10 straight hits at each range. Never...

earlmck

Earl, the rock chucks have gone back to bed already? Yeah, they seldom stay up much past mid July here. A few will poke their heads out for a few minutes in September but you gotta' be quick to catch those shy fellows. And this year the sage rats went down about the same time which is quite a bit e...

earlmck

Purty purty! But that tang sight would be a hazard to my shootin' eye with my style of hold.

earlmck

Thanks Steve -- you make me realize how fortunate I have been so far. Plenty of fires burning in Oregon these days but they haven't closed off our shooting access (yet). We have our annual BPCR Buffalo Shoot coming up in weekend after next. Hope our fire bureaucrats don't get nuts and close us down ...

earlmck

I think a new Marlin owner is apt to look at that "Bullseye" and think that is where the sling swivel should go and -- out comes the Bullseye. Then that isn't quite the right spot but -- oh well. I'm just guessin' how they go missing. But it's not uncommon for a used Marlin to be missing t...

earlmck

I've been playing with a new "soulless side-lever" thingy so was back at the range yesterday. While I had a 100 yard target box set up I thought I'd run some 22's through to see how they looked on paper instead of my usual "bounce of the tin-cans" testing. The day was warm/sunny ...

earlmck

I had tried to go to MVA a few weeks ago and got the "site down" message. But it works OK for me now.

earlmck

I was wandering (online0 thru Natchez stuff and saw that they had RL 7 available. A mere $60/lb in the 5# jugs, which as more than double from last time I bought any. But my dollars are worth a lot less now than they were then so -- what the heck. I ordered up a couple jugs which should keep me from...

earlmck

Earl, I used the SS 60 Gr in an MCA adapter in my suppressed M-16 for food addition to MREs. Very quiet, accurate, and handy when you fired the .22 you just cycled the action for 5.56. Arch's 2010 094.jpg Now that looks like a slick way to use these quiet 60 grainers. The twist on that 5.56 should ...

earlmck

Interesting report! So no baffle strikes with the 60-grainers - that is good news! :D I made sure they shot straight before I screwed on the suppressor. I'll do the same with the pistols where maybe they aren't stabilizing as well. Earl, I recall getting poor accuracy when I played with that 60-gra...

earlmck

I bought a new toy the other day -- one of those "radar chronographs". Pretty slick! It is so easy to check velocities that I've been chrono-ing stuff I hadn't bothered with previously -- pellet guns, 22's with different ammo. Anyway, I recall some time back folks here discussed the use of...

earlmck

I found some of the best accuracy with 190 gr. cast bullet using H335. Well thanks for the tip Jim. I don't think I ever used H335 with cast bullets in the 30/30. 4759 until that ran out and now 5744 which is running kinda' low. Lots of H335 on hand so I'm going to give that a go. Coupla' grand kid...

earlmck

The main thing to know about Vitamin D is that Big Pharma don't want you taking it. Research in the 1980's scared Pharma enough that they then took over the major medical journals so they could kill all the "D" articles. That's why it was so easy for them to kill Ivermectin -- they already...

earlmck

I just laid in a couple jugs H335 so I can keep the fambly AR's running through the coming hard times. That'd do real fine for light 30/30 jacketed stuff. Powder Valley seemed to have plenty.

earlmck

Sheesh guys -- get yer gol danged vitamin D level up where it otta be and you'll quit gettin that junk. Young guys running around all day in their swim trunks get plenty D from the sun. The rest of us will need to supplement.

earlmck

Neat! Thanks for sharing with us Val. Fine pieces of history there.

earlmck

Hmmm.... Interesting.

earlmck

Darkhorse podcast (I catch them on Rumble) had a fellow on tonight who makes a pretty dang good case for three shooters, with the one who shot Trump being on the water tower. And the one who took the very first shot being off in the woods and trying to take out the counter-snipers but missing and ge...

earlmck

I don't know why anyone uses Youtube anymore since Rumble became available. Anybody who doesn't put their stuff on Rumble doesn't get my attention because I figure they are OK with a "little light censorship".

earlmck

When they took us Navy boys out to Camp Pendleton for weapons training before we headed over to 'Nam, that's how they had us clean the 45's. A big deep tub of what I thought at the time was kerosene where several of us at a time scrubbed our pistols. I don't remember what we did with all the other g...

earlmck

Whoo! Sounds too dang close! Glad you had a good outcome Brad.

We had Herefords and later on some Shorthorns and I never even had any excitement with the bulls. But a yearling heifer sure boosted me over a tall fence one time.

earlmck

A friend came to me one day and asked me if I would teach him how to cast bullets. I told him, "Yes. When the weather cools off." Then I told him, "Til then, go around to the tire shops and ask them if they will give you their old wheelweights." When the Fall was going good and ...

earlmck

And he is one of a very small group who don't genuflect to AIPAC (American-Israel Public Affairs Committee). Who might actually put America's interest above Israel's. Very few of our Congressmen will do that.

earlmck

I have long cultivated friends who like to garden. Couple of my "main guys" are taking this year off 'cause of "gardening burn-out". Or something.

earlmck

Paladin wrote: ↑Fri Jun 28, 2024 11:41 pm Lots of room in FEDERAL prisons for the bosses and agents.

That's certainly what should happen!
But this particular OC group seems particularly well connected politically.

earlmck

Bill in Oregon wrote: ↑Wed Jun 26, 2024 5:17 am Love it! That young man needs to ride it in Golden Gate Park on a Sunday.

Oh yeah!

earlmck

I don't hardly shoot jacketed bullets but have certainly acquired some used guns with ungodly jacket fouling. Foaming bore cleaner sure saves a lot of scrubbing.

earlmck

So gas is up by a factor of 10 over the past 50 years. But so is the amount of dollars we get for a day's work. No, the REAL robbery comes in our reloading components. I just got a shipment in from Powder Valley so I am 100% current on prices. I have a few remnants from early '70's -- Consider this:...

Search found 3131 matches