Paco Kelly's Leverguns.com

FOTIS

157 Hammer bullets and 58 GR of AA2495. 2930 fps. Devastating and super accurate.

I was told the 200 gr flextips were discontinued as were the 200 flat point.

FOTIS

Well it is an sample of one. Got mine for 500 total with shipping from GunBroker

FOTIS

Will is giving good advice. Other than the sights, what do you think of your Huckleberry so far? I just don't know quite what to think about the aluminum receiver. Very very accurate and other than my Sako finnwolf the slickest lever I played with, and I have a lot of them. The trigger averaged out...

FOTIS

Hey guys I need some help here. I just bought a G-Force huckleberry 357 lever. It is pretty much a copy of the 1892 especially the Rossi version. The problem I'm having is it has this big fluorescent front sight which basically covers a 5-in circular target at 50 yd. I'm not fond of these glow sites...

FOTIS

Well with the shorty ramp I can see the front site but the rear is totally blocked.

FOTIS

finally got a shorty ramp on it!

FOTIS

Sir:

I think you're referring to the now defunct Weaver pivot mounts.

FOTIS

What rear sight does your gun have? Is it the factory sight with the two small binding screws holding the sight plate to the base? Yes sir that is the one but like I said at 25 yards I had to move the whole sight and the leaf part (with the 2 screws) all the way down. In fact if you look closely th...

FOTIS

I agree I should be able to use the sights with the scope removed but with a #95 rear base not even remotely close~

I guess I have to start removing. As for the front sight I guess I need like a .67" high....Good luck with that I guess........

FOTIS

Is there a way where you can scope it (ie Weaver bases rings) and be able to remove the scope and still access the open sights? I have a set of weaver bases on my 30-30 and them "block" looking bases completely cover the sights. Especially on mine that shoots kinda high to begin with and t...

FOTIS

Thank you sir!!!

FOTIS

Actually did not help since I have a receiver peep sight

Is middle of bead to bottom of dovetail the industry standard for measuring sights

So in the following image we measure the gold part only right?

FOTIS

Griff wrote:All purpose answer to your question: Brownell's Front Sight Height Calculator.

That is awesome! Thanks

FOTIS

24" barrel.

My load is the hornady 200 grain with h4350.

I was thinking of getting one of these to replace the front factory sight

http://www.midwestgunworks.com/page/mgw ... ts/LYMAN31

FOTIS

I have a browning 71 in 348 Winchester. I found a load that is deadly accurate but my rear peep (Williams) can NOT go low enough so the load shoots high. Can someone tell me what the factory front sight height is so I can buy a taller one? Here is a picture of my setup. http://img.photobucket.com/al...

FOTIS

Might want to wait!!!!

http://www.outdoorlife.com/blogs/gun-sh ... -cartridge

FOTIS

I in 38" will stabilize 300s. From a 444 Marlin at 2100 fps yes! from a 44 mag at 1400 fps....I have never seen it or from a ruger auto 10/44 444 with 300 grain sierra 55.5 gr H335 2100 fps http://img.photobucket.com/albums/v514/378fan/IMG_20130905_113325_690_zps3b5c6da6.jpg 300 gr beartooth c...

FOTIS

Thank you fellas. Picked her up today! Darn snow slowed don delivery. Brand new!

FOTIS

It is a moral imperative!

FOTIS

vancelw wrote:It's already Drilled and tapped for Lyman or Williams receiver sight. I have one on my 71. I may have a couple extras I could offer for sale. Let me look.

Great let me know I might be interested. PM ME

FOTIS

Now I have never been good with buckhorn sights (you know I think I do not know how to use them!!!) so looking for a peep. What do you propose?

FOTIS

44shooter wrote:I have Speer Gold Dot Short Barrel for my snubnose. The difference is the SB bullets have a deeper hollow point to compensate for the lower velocity.

This ^^^

FOTIS

Browning High grade 71 NIB. Looked for a blued but got a great deal on this one. http://i.imgur.com/EAkO7k2.jpg http://i.imgur.com/7DhZTUL.jpg http://i.imgur.com/bPgQn5M.jpg http://i.imgur.com/Bz4Jmeh.jpg http://i.imgur.com/8wmcs7N.jpg http://i.imgur.com/INFF5FY.jpg http://i.imgur.com/QZk1ity.jpg ht...

FOTIS

And this dog will hunt! Not just show!

FOTIS

Got one Thank you!

http://noslerreloading.com/viewtopic.php?f=9&t=26953

FOTIS

Looking to get a 348 Winchester but not sure which is a a better gun.
Anyone have any experience with the new winchester 71? They introduced it 2 years ago I think. How is the browning?

Any input is surely appreciated.

FOTIS

Thank you Gents.

FOTIS

I am looking for one for my 30-30 but not for a tang mounted one. Anyone know where I can get one? Thank you!

FOTIS

how well do these work?

http://www.buffaloarms.com/Detail.aspx? ... 5&CAT=4077

FOTIS

Any input for this sight?

I am thinking on mounting it on my Marlin 45-70. I just saw it in this picture and it looked really interesting. Any input or specs about it would be appreciated!

FOTIS

Thank you gents. My intention is not to hot rod it. Just to keep life simple as I do have hot 45 colt loads for my Ruger Bisley. I do not want one making it's way to the Uberti 45 by mistake.

FOTIS

I am getting one of these and wish to know if I can load the 45 colt same pressures as my blackhawk 45 colt.

It would make life simpler.

Any input?

FOTIS

Thank you all

FOTIS

pokey wrote:"pre 64 winchester"

what model?
how old?
what condition?

Minty 94 in 32 winchester special made in 1959 (according to win records). Just bought it last week. Will have it soon.

FOTIS

Thank you.

FOTIS

How about a receiver sight like the Lyman 66?

FOTIS

Is there a way of installing adjustable peep sites on this without any modifications? I do not want to ruin the value. Thank you for any insight,

FOTIS

I saw a 1895 Marlin the other day. It had a really nice rear sight which replaced the factory standard sight. It was a ladder type for long range shooting (not a peep). It had graduations on it like the older Henrys, if you know what I mean, and it locked on the graduations do it would not slide up/...

FOTIS

FOTIS

I am thinking of installing a Marbles Tang on this gun. This is what I am looking at but it looks different from the older ones. They call this one Improved Peep Sight Base . Does anyone know what is involved with the installation? http://www.midwayusa.com/eproductpage.exe/showproduct?saleitemid=123...

FOTIS

Cartridge : .38 Special +P (SAAMI) Bullet : .357, 158, Nosler JHP 44841 Cartridge O.A.L. L6: 1.550 inch or 39.37 mm Barrel Length : 20.0 inch or 508.0 mm Predicted Data for Indicated Charges of the Following Powders. Matching Loading Ratio (Filling, ''Load Density''): 105 % These calculations refer ...

FOTIS

Here is my new toy! My wife is awesome.

She gave me this for Christmas! What a gal!
Marlin 336 30-30!

FOTIS

I despise the heat! I will stay in my Cheyenne!

FOTIS

http://noslerreloading.com/phpBB2/viewt ... highlight=

FOTIS

Chuck 100 yd wrote:Jaguarundi , I like that!!

+1!!!!!!!!!!!!!!

FOTIS

Well got one from the wife as a X-mas present!!!!!!!!!!!!!!

FOTIS

KCSO wrote:375 Is almost as good as a 38-55! .........................

how so?

FOTIS

brilliant!

FOTIS

3leggedturtle wrote:is a great show with a savage lever, then joe screws on his scope then pops bad guy at 1100 yards plus, whats not to like, no pun intended

confirmed kill at 1100? I do not remember them mentioning distance.

FOTIS

TedH wrote:The first thing I would do, would be to shoot it again from a solid sandbag or mechanical rest to eliminate as much of the human factor as possible.

+1

Search found 84 matches