Thanx Griff. I ran the die down until only one adjustment thread was left, and finally got a flare. Now, the primer tube does not want to feed properly, and the powder measure actually started to throw very inconsistent, and lighter and lighter charges, until it quit dropping powder all together! It looks to be static from being stored several years in it's plastic shipping box. I took the hopper off and wiped it down both inside and out with several drier sheets, which seems to have helped that a lot. Now the primer tube does not feed properly. The primers either fail to drop, or just disappear. I finally noticed primers falling out the side of the nylon primer feed. Some were fine, others mangled. Gotta check this out now.
There are many little plastic "beans" inside the storage box, as well as some deteriorated rubber from somewhere. I am guessing a very good cleaning, and de-static job, may solve most, if not all, the problems. But, right now, it is starting to drive this old man nuts. Well, actually too late for that, since that happened a long time ago.
![Laughing :lol:](./images/smilies/icon_lol.gif)
Guess I need to spend some more "get to know you" time with it.
dennie