Price check on Win 9422M Laminate -- NOW WITH PHOTO

Welcome to the Leverguns.Com Forum. This is a high-class place so act respectable. We discuss most anything here ... politely.

Moderators: AmBraCol, Hobie

Forum rules
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.

Please post political post in the new Politics forum.
Post Reply
Noah Zark
Senior Levergunner
Posts: 1333
Joined: Sun Oct 07, 2007 11:03 am
Location: PA

Price check on Win 9422M Laminate -- NOW WITH PHOTO

Post by Noah Zark »

Need some input, folks.

Local guy has a 9422M (22WMR) with the orange-brown laminate furniture and a Texas-made Weaver 2.5 scope in Weaver tip-off rings for sale. There are no scratches or dings anywhere in the laminated furniture, and no wear or rust on any of the metal. Seller claims it was fired less than 50 rds, and I cannot tell if it was fired at all. The 9422M feels a tad heavy in the hand, but I'm used to shooting lighter 22LR and 22M rifles of late.

Seller wants $400, and I'm leaning toward pulling the trigger. Comments?

UPDATE: Bought & paid for:

Image

Replaced the broken rear sight with a Williams, and removed the scope.

Noah
Last edited by Noah Zark on Tue Sep 08, 2009 6:59 am, edited 2 times in total.
Might as well face it, you're addicted to guns . . .
User avatar
J Miller
Member Emeritus
Posts: 14885
Joined: Sat Mar 31, 2007 7:46 pm
Location: Not in IL no more ... :)

Re: Price check on Win 9422M Laminate -- Deal or not?

Post by J Miller »

I would have no problem paying that amount for a 9422M in excellent condition. The scope would have no bearing on my decision as it would come off the second I owned the rifle. Mater of fact I'd tell the seller I didn't want it and see if he'd come down a bit. If not no biggie.

Joe
***Be sneaky, get closer, bust the cap on him when you can put the ball where it counts ;) .***
User avatar
Buck Elliott
Member Emeritus
Posts: 2830
Joined: Mon Sep 10, 2007 12:15 pm
Location: Halfway up Sheep Mountain -- Cody, Wyoming

Re: Price check on Win 9422M Laminate -- Deal or not?

Post by Buck Elliott »

BUY IT -- ENJOY IT -- NEVER LOOK BACK---

9422Ms are very desireable shooters, regardless of their 'furniture..'

Have to agree with Joe about the scope, though...
Regards

Buck

Life has a way of making the foreseeable that which never happens, and the unforeseeable, that which your life becomes...
User avatar
TedH
Advanced Levergunner
Posts: 8250
Joined: Tue Apr 03, 2007 5:19 pm
Location: Missouri

Re: Price check on Win 9422M Laminate -- Deal or not?

Post by TedH »

Deal
NRA Life Member
User avatar
Blaine
Posting leader...
Posts: 30495
Joined: Mon Dec 17, 2007 2:22 pm
Location: Still Deciding

Re: Price check on Win 9422M Laminate -- Deal or not?

Post by Blaine »

Mine is LN, plain walnut and I wouldn't entertain selling it for twice that.....
The Rotten Fruit Always Hits The Ground First

Proud Life Member Of:
NRA
Second Amendment Foundation
Citizens Committee For The Right To Keep And Bear Arms
DAV
L_Kilkenny
Senior Levergunner
Posts: 1204
Joined: Mon Mar 02, 2009 9:00 pm
Location: Iowa
Contact:

Re: Price check on Win 9422M Laminate -- Deal or not?

Post by L_Kilkenny »

I can't believe you haven't snatched it up already!!

Love to find one of those. Henry's go for almost that much!

LK
User avatar
O.S.O.K.
Advanced Levergunner
Posts: 5533
Joined: Sun Apr 27, 2008 4:15 pm
Location: Deep in the Piney Woods of Mississippi

Re: Price check on Win 9422M Laminate -- Deal or not?

Post by O.S.O.K. »

bang pull the trigger :)
NRA Endowment Life
Phi Kappa Sigma, Alpha Phi 83 "Skulls"
OCS, 120th MP Battalion, MSSG
MOLON LABE!
1886
Advanced Levergunner
Posts: 2835
Joined: Mon Sep 03, 2007 8:18 pm

Re: Price check on Win 9422M Laminate -- Deal or not?

Post by 1886 »

It is a very good deal. Congrats., 1886.
User avatar
Old Savage
Posting leader...
Posts: 16730
Joined: Mon Sep 03, 2007 3:43 pm
Location: Southern California

Re: Price check on Win 9422M Laminate -- Deal or not?

Post by Old Savage »

Do it Now! Those things are really fun with a scope.
In the High Desert of Southern Calif. ..."on the cutting edge of going back in time"...

Image
Noah Zark
Senior Levergunner
Posts: 1333
Joined: Sun Oct 07, 2007 11:03 am
Location: PA

Re: Price check on Win 9422M Laminate -- Deal or not?

Post by Noah Zark »

You guys are more enthusiastic at separating me from my $$$ than my wife is.


Thought it was a good deal; I appreciate the input and sanity check.

Noah
Might as well face it, you're addicted to guns . . .
User avatar
Old Savage
Posting leader...
Posts: 16730
Joined: Mon Sep 03, 2007 3:43 pm
Location: Southern California

Re: Price check on Win 9422M Laminate -- Deal or not?

Post by Old Savage »

You are investing in a retirement or life insurance acct that she can access without govt interference or delay that has outperformed real estate or stocks in the last 8 years.
In the High Desert of Southern Calif. ..."on the cutting edge of going back in time"...

Image
User avatar
Blaine
Posting leader...
Posts: 30495
Joined: Mon Dec 17, 2007 2:22 pm
Location: Still Deciding

Re: Price check on Win 9422M Laminate -- Deal or not?

Post by Blaine »

Noah, if you get that for 400 and don't like it for other than mechanical issues, I'll be tickled to give you what you paid for it + shipping :wink:
The Rotten Fruit Always Hits The Ground First

Proud Life Member Of:
NRA
Second Amendment Foundation
Citizens Committee For The Right To Keep And Bear Arms
DAV
victor
Levergunner 2.0
Posts: 105
Joined: Mon Dec 17, 2007 2:39 pm
Location: South Shore of Oneida Lake,Central NY

Re: Price check on Win 9422M Laminate -- Deal or not?

Post by victor »

I say buy it.Sounds like a good deal.I've always liked the looks of that
laminate wood.I also like that tad heavy in the hand feel.
I had a 9422M XTR,loved it :D,miss it :(
Vic
Winchester Model 94(61').32 Winchester Special
buckeyeshooter
Senior Levergunner
Posts: 1263
Joined: Mon Dec 17, 2007 7:57 pm

Re: Price check on Win 9422M Laminate -- Deal or not?

Post by buckeyeshooter »

buy It!!!!!
User avatar
pokey
Advanced Levergunner
Posts: 2704
Joined: Mon Feb 09, 2009 10:19 pm
Location: La center, wa.

Re: Price check on Win 9422M Laminate -- Deal or not?

Post by pokey »

deal.
careful what you wish for, you might just get it.

"BECAUSE I CAN"
CEMENTHEAD
Levergunner 3.0
Posts: 918
Joined: Thu Sep 27, 2007 5:09 pm
Location: RHODE ISLAND

Re: Price check on Win 9422M Laminate -- Deal or not?

Post by CEMENTHEAD »

:mrgreen: :D DEAL !!!!!
War sees no color, sex, or ethnic background - wars only see blood shed by our heroes for our freedoms.

I Am An American! Fighting for our Country and our way of life.

Fourth Generation Veteran and Proud !!
User avatar
Hobie
Moderator
Posts: 13902
Joined: Sat Mar 31, 2007 1:54 pm
Location: Staunton, VA, USA
Contact:

Re: Price check on Win 9422M Laminate -- Deal or not?

Post by Hobie »

That is a good price. (never include the scope in the price unless it is a Leupold or other fine sight with a lifetime warranty)
Sincerely,

Hobie

"We are all travelers in the wilderness of this world, and the best that we find in our travels is an honest friend." Robert Louis Stevenson
Noah Zark
Senior Levergunner
Posts: 1333
Joined: Sun Oct 07, 2007 11:03 am
Location: PA

Re: Price check on Win 9422M Laminate -- Deal or not?

Post by Noah Zark »

Made an appointment with the seller for this evening to do the sale.

He fessed up that the stamped rear sight has one half of the folded dovetail missing, and the sight is pretty loose, "but you'll be using the scope anyway." WRONG. Maybe some other rifle of mine, but IMO, scopes don't belong on levers. No matter on the rear sight; I have a nice stash of rear sights and elevators I've gleaned from local gunshops. They can't seem to sell a rifle without a scope being mounted on it, and each dealer has a box or drawer full of "spare take-off sighting parts."

I appreciate the input from everyone very much! Pics to follow late tonight or sometime this weekend.

Noah
Might as well face it, you're addicted to guns . . .
Idahoser

Re: Price check on Win 9422M Laminate -- Deal or not?

Post by Idahoser »

sight's easy to replace. SOLD! now, if you can use that sight issue to get the price even lower, great, but don't leave without the gun. That one's a sure winner on growing in value.
User avatar
Blaine
Posting leader...
Posts: 30495
Joined: Mon Dec 17, 2007 2:22 pm
Location: Still Deciding

Re: Price check on Win 9422M Laminate -- Deal or not?

Post by Blaine »

He fessed up that the stamped rear sight has one half of the folded dovetail missing, and the sight is pretty loose
Sounds like another 25 bucks off the price :wink:
The Rotten Fruit Always Hits The Ground First

Proud Life Member Of:
NRA
Second Amendment Foundation
Citizens Committee For The Right To Keep And Bear Arms
DAV
User avatar
Paladin
Senior Levergunner
Posts: 1878
Joined: Mon Jan 21, 2008 9:55 am
Location: Not Working (much)

Re: Price check on Win 9422M Laminate -- Deal or not?

Post by Paladin »

Good deal, been looking after I got back to US sand and that is about 200 less than what I have found.
It is not the critic who counts
Noah Zark
Senior Levergunner
Posts: 1333
Joined: Sun Oct 07, 2007 11:03 am
Location: PA

Re: Price check on Win 9422M Laminate -- NOW WITH PHOTO

Post by Noah Zark »

Image

Replaced the rear sight with a Williams and sighted it in on Saturday. Dead on at 100 yds. Guy next to me shooting a scoped AR15 couldn't believe the 9422M could hit the same spot time and again without a scope.

Noah
Might as well face it, you're addicted to guns . . .
User avatar
TedH
Advanced Levergunner
Posts: 8250
Joined: Tue Apr 03, 2007 5:19 pm
Location: Missouri

Re: Price check on Win 9422M Laminate -- NOW WITH PHOTO

Post by TedH »

Sweet! :mrgreen:
NRA Life Member
User avatar
pokey
Advanced Levergunner
Posts: 2704
Joined: Mon Feb 09, 2009 10:19 pm
Location: La center, wa.

Re: Price check on Win 9422M Laminate -- NOW WITH PHOTO

Post by pokey »

ALMOST always it's the shooter not the gun.

good on ya.
careful what you wish for, you might just get it.

"BECAUSE I CAN"
L_Kilkenny
Senior Levergunner
Posts: 1204
Joined: Mon Mar 02, 2009 9:00 pm
Location: Iowa
Contact:

Re: Price check on Win 9422M Laminate -- NOW WITH PHOTO

Post by L_Kilkenny »

That gun can ride in my truck anyday! Nice job.

LK
User avatar
J Miller
Member Emeritus
Posts: 14885
Joined: Sat Mar 31, 2007 7:46 pm
Location: Not in IL no more ... :)

Re: Price check on Win 9422M Laminate -- NOW WITH PHOTO

Post by J Miller »

Noah Zark,

You done good. That is one fine looking rifle. Glad you bought it.

Joe
***Be sneaky, get closer, bust the cap on him when you can put the ball where it counts ;) .***
Pete44ru
Advanced Levergunner
Posts: 11242
Joined: Sun Sep 02, 2007 7:26 am

Re: Price check on Win 9422M Laminate -- NOW WITH PHOTO

Post by Pete44ru »

BTW, NZ -

Your rifle is the brown lamo model that Winchester labelled the 1988-99 "Model 9422 WinTuff"

- as opposed to it's stablemate, the 1987-97 green lamo 1987-97 "Model 9422 WinCam".

I'm glad you were able to grab it for half it's current value.

.
Noah Zark
Senior Levergunner
Posts: 1333
Joined: Sun Oct 07, 2007 11:03 am
Location: PA

Re: Price check on Win 9422M Laminate -- NOW WITH PHOTO

Post by Noah Zark »

Pete44ru wrote:BTW, NZ -

Your rifle is the brown lamo model that Winchester labelled the 1988-99 "Model 9422 WinTuff"

- as opposed to it's stablemate, the 1987-97 green lamo 1987-97 "Model 9422 WinCam".

[johhnycarson] I did not know that! [/johnnycarson]

Thanks very much for that 411, Pete. Now I know what WinTuff and WinCam mean; I've seen those terms and wondered.

Thanks again,

Noah
Might as well face it, you're addicted to guns . . .
Pete44ru
Advanced Levergunner
Posts: 11242
Joined: Sun Sep 02, 2007 7:26 am

Re: Price check on Win 9422M Laminate -- NOW WITH PHOTO

Post by Pete44ru »

Good Luck with it, NZ ! :P :P

.
Post Reply