Lower link?

Welcome to the Leverguns.Com Forum. This is a high-class place so act respectable. We discuss most anything here ... politely.

Moderators: AmBraCol, Hobie

Forum rules
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.

Please post political post in the new Politics forum.
Post Reply
Nath
Advanced Levergunner
Posts: 8751
Joined: Sat Sep 08, 2007 1:41 pm
Location: England

Lower link?

Post by Nath »

Guys, quick question. Are all the lower links on a 94 the same?
I can get a new 357 one to replace my repaired one on my 30/30.
Thank you.
N.
Psalm ch8.

Because I wish I could!
Top
User avatar
Griff
Posting leader...
Posts: 21402
Joined: Sat Mar 31, 2007 4:56 pm
Location: OH MY GAWD they installed a STOP light!!!

Re: Lower link?

Post by Griff »

No, different rim diameters dictate different heights on the stop. Also 2 different attachment methods for the link itself. A threaded cross screw (same as hammer screw), and a cross pin w/separate retaining screw.
Griff,
SASS/CMSA #93
NRA Patron
GUSA #93

There is a fine line between hobby & obsession!
AND... I'm over it!!
No I ain't ready, but let's do it anyway!
Top
Nath
Advanced Levergunner
Posts: 8751
Joined: Sat Sep 08, 2007 1:41 pm
Location: England

Re: Lower link?

Post by Nath »

Griff wrote: ↑Fri Oct 21, 2022 12:21 pm No, different rim diameters dictate different heights on the stop. Also 2 different attachment methods for the link itself. A threaded cross screw (same as hammer screw), and a cross pin w/separate retaining screw.
Thanks Griff and yes if I remember correctly the 357 has a taller stop than the 30-30 which is ok because I can remove some of it and yes check for the keeper screw hole as mine has.
Psalm ch8.

Because I wish I could!
Top
User avatar
Griff
Posting leader...
Posts: 21402
Joined: Sat Mar 31, 2007 4:56 pm
Location: OH MY GAWD they installed a STOP light!!!

Re: Lower link?

Post by Griff »

Nath wrote: ↑Fri Oct 21, 2022 12:42 pm
Griff wrote: ↑Fri Oct 21, 2022 12:21 pmNo, different rim diameters dictate different heights on the stop. Also 2 different attachment methods for the link itself. A threaded cross screw (same as hammer screw), and a cross pin w/separate retaining screw.
Thanks Griff and yes if I remember correctly the 357 has a taller stop than the 30-30 which is ok because I can remove some of it and yes check for the keeper screw hole as mine has.
You could always weld yours up, oxygen/acetylene using a steel coat hanger as fill rod. After shaping to finish size, heat new stop to cherry red, quench in oil to surface harden. Better'n new!
Griff,
SASS/CMSA #93
NRA Patron
GUSA #93

There is a fine line between hobby & obsession!
AND... I'm over it!!
No I ain't ready, but let's do it anyway!
Top
Nath
Advanced Levergunner
Posts: 8751
Joined: Sat Sep 08, 2007 1:41 pm
Location: England

Re: Lower link?

Post by Nath »

I have friend.
I did a thread on it just a couple of days ago👍🏻
Psalm ch8.

Because I wish I could!
Top
Post Reply

Return to “General Discussion”