In a moment of weakness .480 Ruger No. 1

Welcome to the Leverguns.Com Forum. This is a high-class place so act respectable. We discuss most anything here ... politely.

Moderators: AmBraCol, Hobie

Forum rules
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.

Please post political post in the new Politics forum.
Post Reply
User avatar
Scott Tschirhart
Advanced Levergunner
Posts: 4559
Joined: Fri Oct 16, 2020 2:56 pm
Location: San Antonio, Texas

In a moment of weakness .480 Ruger No. 1

Post by Scott Tschirhart »

I placed a bid on a Ruger No.1 in .475 Linebaugh/.480 Ruger.......and won it.

They made these in a short handy version and I wanted one from when they first came out but I did not have the dinero. I still have a bunch of .480 components, brass and dies so I am set up to load for it.

Another project. :? But it is a levergun.
Last edited by Scott Tschirhart on Thu Jul 21, 2022 5:28 pm, edited 1 time in total.
User avatar
Grizz
Advanced Levergunner
Posts: 12366
Joined: Fri Aug 31, 2007 7:15 pm

Re: In a moment of weakness

Post by Grizz »

Congrats on that one. Worthwhile project. :)
User avatar
ollogger
Advanced Levergunner
Posts: 2826
Joined: Mon Jul 05, 2010 2:47 pm
Location: Wheatland Wyoming
Contact:

Re: In a moment of weakness

Post by ollogger »

That will work out real well for you



Brad
piller
Posting leader...
Posts: 15275
Joined: Sat Sep 29, 2007 9:49 pm
Location: South of Dallas

Re: In a moment of weakness

Post by piller »

I like the .480 Ruger for 400 grain bullets. Plenty for wild pigs. Only critter I ever recovered a bullet out of was a 1200 pound water buffalo cape buffalo hybrid at that game ranch near Hondo.
D. Brian Casady
Quid Llatine Dictum Sit, Altum Viditur.
Advanced is being able to do the basics while your leg is on fire---Bill Jeans
Don't ever take a fence down until you know why it was put up---Robert Frost
samsi
Levergunner 3.0
Posts: 523
Joined: Tue Sep 11, 2007 9:55 am
Location: AZ

Re: In a moment of weakness

Post by samsi »

I've had a couple No.1's and really like them, but I have no idea where I was when Ruger did those since I missed them completely. Looking forward to the field reports.
User avatar
Scott Tschirhart
Advanced Levergunner
Posts: 4559
Joined: Fri Oct 16, 2020 2:56 pm
Location: San Antonio, Texas

Re: In a moment of weakness

Post by Scott Tschirhart »

piller
Posting leader...
Posts: 15275
Joined: Sat Sep 29, 2007 9:49 pm
Location: South of Dallas

Re: In a moment of weakness

Post by piller »

I have recovered three of the 325 grain bullets. They were XTP bullets and expanded well. The 400 grain went through a rib on one side and halfway through the rib on the other side of that hybrid buffalo. I recovered 2. I shot too high on the body. Very little expansion, but a heck of a lot of penetration. I only used 400 grain flat points on that hybrid.
D. Brian Casady
Quid Llatine Dictum Sit, Altum Viditur.
Advanced is being able to do the basics while your leg is on fire---Bill Jeans
Don't ever take a fence down until you know why it was put up---Robert Frost
User avatar
2ndovc
Advanced Levergunner
Posts: 9453
Joined: Fri Sep 07, 2007 11:59 am
Location: OH, South Shore of Lake Erie

Re: In a moment of weakness

Post by 2ndovc »

Sounds cool, looking forward to hearing how it shoots.

jb
8)
jasonB " Another Dirty Yankee"


" Tomorrow the sun will rise. Who knows what the tide could bring?"
User avatar
Scott Tschirhart
Advanced Levergunner
Posts: 4559
Joined: Fri Oct 16, 2020 2:56 pm
Location: San Antonio, Texas

Re: In a moment of weakness

Post by Scott Tschirhart »

It has arrived. Seems almost too light, reminds me of my .30-30 short gun. Nice trigger. The sights meet my eye when I throw it up so this is destined to be an iron sighted rifle. I think I have a reciever sight here for it somewhere.
You do not have the required permissions to view the files attached to this post.
Last edited by Scott Tschirhart on Thu Jul 21, 2022 8:09 am, edited 1 time in total.
User avatar
Scott Tschirhart
Advanced Levergunner
Posts: 4559
Joined: Fri Oct 16, 2020 2:56 pm
Location: San Antonio, Texas

Re: In a moment of weakness

Post by Scott Tschirhart »

The seller also included a gallon ziplock bag with a bunch of empty cases. About half appear to be unfired and the rest appear to me lightly used. I certainly did not expect this and it is much appreciated.
You do not have the required permissions to view the files attached to this post.
Walt
Senior Levergunner
Posts: 1406
Joined: Sun Jun 19, 2022 4:01 pm
Location: NM

Re: In a moment of weakness

Post by Walt »

Interesting caliber, especially in the no. 1. You did great, Scott!
User avatar
Scott Tschirhart
Advanced Levergunner
Posts: 4559
Joined: Fri Oct 16, 2020 2:56 pm
Location: San Antonio, Texas

Re: In a moment of weakness

Post by Scott Tschirhart »

At the Arkansas gathering earlier this year I shot a nifty little double that someone had converted to .480 Ruger. It was a stomper an very pleasant to shoot.
hfcable
Advanced Levergunner
Posts: 2502
Joined: Tue Sep 04, 2007 1:24 pm
Location: wasilla, alaska and bozeman, montana

Re: In a moment of weakness .480 Ruger No. 1

Post by hfcable »

Jeff quinn had some great loads for the .480 in a rifle. i use his loads in my 480 rossi lever gun
cable
User avatar
CowboyTutt
Advanced Levergunner
Posts: 3789
Joined: Tue Sep 11, 2007 8:27 pm
Location: Mission Viejo, CA

Re: In a moment of weakness .480 Ruger No. 1

Post by CowboyTutt »

That's a really great find Scott, congrats! Should be a lot of fun! -Tutt
"It ain't dead! As long as there's ONE COWBOY taking care of ONE COW, it ain't dead!!!" (the Cowboy Way)
-Monte Walsh (Selleck version)

"These battered wings still kick up dust." -Peter Gabriel
Nath
Advanced Levergunner
Posts: 8660
Joined: Sat Sep 08, 2007 1:41 pm
Location: England

Re: In a moment of weakness .480 Ruger No. 1

Post by Nath »

What a find :mrgreen:
Psalm ch8.

Because I wish I could!
Bill in Oregon
Advanced Levergunner
Posts: 9426
Joined: Sun Jun 29, 2008 10:05 am
Location: The Land of Enchantment

Re: In a moment of weakness .480 Ruger No. 1

Post by Bill in Oregon »

Scott, I'll be interested in your comments on your No. 1's recoil with full-power loads. Also looking forward to chronograph data! 8)
mickbr
Levergunner 3.0
Posts: 918
Joined: Mon Jan 22, 2018 11:29 pm

Re: In a moment of weakness .480 Ruger No. 1

Post by mickbr »

nice one Scott. I started on a ruger 480 bolt action carbine project at one point but costs defeated me. A rossi 92 or ruger no.1 sure would have been nice to find.
Dusty Texian
Levergunner 2.0
Posts: 432
Joined: Mon Feb 11, 2013 11:11 am
Location: Texas

Re: In a moment of weakness

Post by Dusty Texian »

Scott Tschirhart wrote: Thu Jul 21, 2022 7:44 am It has arrived. Seems almost too light, reminds me of my .30-30 short gun. Nice trigger. The sights meet my eye when I throw it up so this is destined to be an iron sighted rifle. I think I have a reciever sight here for it somewhere.
Great looking rifle and in a very useful cartridge . Good on Ya .
Trailboss
Levergunner 2.0
Posts: 207
Joined: Mon Jul 09, 2012 1:57 am

Re: In a moment of weakness .480 Ruger No. 1

Post by Trailboss »

I've always loved the Ruger No 1 and in a 480 Ruger it's awesome. I do believe that 480R is my favorite cartridge.
User avatar
CowboyTutt
Advanced Levergunner
Posts: 3789
Joined: Tue Sep 11, 2007 8:27 pm
Location: Mission Viejo, CA

Re: In a moment of weakness .480 Ruger No. 1

Post by CowboyTutt »

I'm more interested in the 475 Linebaugh myself and it will shoot both! Also, I think the 475 L might be more accurate in terms of bullet seating closer to the grooves if the chamber is cut for the 475 L. The 480 R will automatically have a longer jump to the grooves (the 475 L has a case length of 1.4 and COL of 1.77 and the 480 R 1.285 and 1.65)
You could always use the 475 L cases and use a powder that slows it down some. -Tutt
"It ain't dead! As long as there's ONE COWBOY taking care of ONE COW, it ain't dead!!!" (the Cowboy Way)
-Monte Walsh (Selleck version)

"These battered wings still kick up dust." -Peter Gabriel
Nath
Advanced Levergunner
Posts: 8660
Joined: Sat Sep 08, 2007 1:41 pm
Location: England

Re: In a moment of weakness .480 Ruger No. 1

Post by Nath »

CowboyTutt wrote: Fri Jul 22, 2022 4:54 pm I'm more interested in the 475 Linebaugh myself and it will shoot both! Also, I think the 475 L might be more accurate in terms of bullet seating closer to the grooves if the chamber is cut for the 475 L. The 480 R will automatically have a longer jump to the grooves (the 475 L has a case length of 1.4 and COL of 1.77 and the 480 R 1.285 and 1.65)
You could always use the 475 L cases and use a powder that slows it down some. -Tutt
Am I reading this right. .012" is going to make all the difference accuracy wise .
Being a single shot could the bullet not be perfectly matched to the chamber?
Psalm ch8.

Because I wish I could!
User avatar
CowboyTutt
Advanced Levergunner
Posts: 3789
Joined: Tue Sep 11, 2007 8:27 pm
Location: Mission Viejo, CA

Re: In a moment of weakness .480 Ruger No. 1

Post by CowboyTutt »

The difference in COL is actually 0.12 of an inch, not 0.012. That's over a 10th of an inch. Common bullet jump to the grooves with a rifle cartridge is 0.030 to 0.050 typically. A tenth of an inch seems like a lot but maybe won't affect things so much, won't know until you try. I like to seat my bullets as close as what is feasible to the grooves depending on bullet material. Pure lead, you can seat into the grooves. Hard cast about 0.030, monolithics about 0.05 to start. Bore alignment matters. -Tutt
"It ain't dead! As long as there's ONE COWBOY taking care of ONE COW, it ain't dead!!!" (the Cowboy Way)
-Monte Walsh (Selleck version)

"These battered wings still kick up dust." -Peter Gabriel
User avatar
Scott Tschirhart
Advanced Levergunner
Posts: 4559
Joined: Fri Oct 16, 2020 2:56 pm
Location: San Antonio, Texas

Re: In a moment of weakness .480 Ruger No. 1

Post by Scott Tschirhart »

We will see. I don't have a single .475 Linebaugh case or loaded round in my possession.

So, let's see what it does with .480 and work from there.

I did find the NECG receiver sight I was looking for.
User avatar
CowboyTutt
Advanced Levergunner
Posts: 3789
Joined: Tue Sep 11, 2007 8:27 pm
Location: Mission Viejo, CA

Re: In a moment of weakness .480 Ruger No. 1

Post by CowboyTutt »

NECG's makes very nice stuff for sure! Scott, it occurred to me that depending on the bullet being used, you might be able to seat it out longer even in the shorter 480 R case.
A Lee FCD could probably get you a good crimp wherever you place it. I have to do the same if I want to shoot my 454 Casull "long" cartridges in the extended action of my Rossi Puma. Just food for thought. -Tutt
"It ain't dead! As long as there's ONE COWBOY taking care of ONE COW, it ain't dead!!!" (the Cowboy Way)
-Monte Walsh (Selleck version)

"These battered wings still kick up dust." -Peter Gabriel
User avatar
Old Savage
Posting leader...
Posts: 16793
Joined: Mon Sep 03, 2007 3:43 pm
Location: Southern California

Re: In a moment of weakness .480 Ruger No. 1

Post by Old Savage »

I have one Tutt wishes he had, Ruger compact .30, 2950 fps, 3x 5/8” 180 gr bullet ;-)
In the High Desert of Southern Calif. ..."on the cutting edge of going back in time"...

Image
Trailboss
Levergunner 2.0
Posts: 207
Joined: Mon Jul 09, 2012 1:57 am

Re: In a moment of weakness .480 Ruger No. 1

Post by Trailboss »

Old Savage wrote: Fri Jul 22, 2022 9:26 pm I have one Tutt wishes he had, Ruger compact .30, 2950 fps, 3x 5/8” 180 gr bullet ;-)
Huh?
Nath
Advanced Levergunner
Posts: 8660
Joined: Sat Sep 08, 2007 1:41 pm
Location: England

Re: In a moment of weakness .480 Ruger No. 1

Post by Nath »

CowboyTutt wrote: Fri Jul 22, 2022 6:04 pm The difference in COL is actually 0.12 of an inch, not 0.012. That's over a 10th of an inch. Common bullet jump to the grooves with a rifle cartridge is 0.030 to 0.050 typically. A tenth of an inch seems like a lot but maybe won't affect things so much, won't know until you try. I like to seat my bullets as close as what is feasible to the grooves depending on bullet material. Pure lead, you can seat into the grooves. Hard cast about 0.030, monolithics about 0.05 to start. Bore alignment matters. -Tutt
Thanks.
So it's a bit like shooting a 38special in a 357 chamber?
Psalm ch8.

Because I wish I could!
User avatar
CowboyTutt
Advanced Levergunner
Posts: 3789
Joined: Tue Sep 11, 2007 8:27 pm
Location: Mission Viejo, CA

Re: In a moment of weakness .480 Ruger No. 1

Post by CowboyTutt »

Nath, exactly! The 480 R is sometimes even referred to as the 475 Special. The math used to confuse me too for a very long time. Never understood why they say "30 thousandths"? The zero on the end doesn't matter, so why not just call it 3 one hundredths? Baffled me for years.

OI, I think I have a 358 Win load that can match that, if not very close, with RL 26. Quick Load is my new BF. I still prefer heavier bullets though. :) -Tutt
"It ain't dead! As long as there's ONE COWBOY taking care of ONE COW, it ain't dead!!!" (the Cowboy Way)
-Monte Walsh (Selleck version)

"These battered wings still kick up dust." -Peter Gabriel
User avatar
Scott Tschirhart
Advanced Levergunner
Posts: 4559
Joined: Fri Oct 16, 2020 2:56 pm
Location: San Antonio, Texas

Re: In a moment of weakness .480 Ruger No. 1

Post by Scott Tschirhart »

I've got a box of shells and I just finished work for the day...

Might have to test this in the morning.
User avatar
Scott Tschirhart
Advanced Levergunner
Posts: 4559
Joined: Fri Oct 16, 2020 2:56 pm
Location: San Antonio, Texas

Re: In a moment of weakness .480 Ruger No. 1

Post by Scott Tschirhart »

First three rounds Hornady factory 325 gr XTP. I shot this from a field rest at 25 yards with factory iron sights.
You do not have the required permissions to view the files attached to this post.
User avatar
Scott Tschirhart
Advanced Levergunner
Posts: 4559
Joined: Fri Oct 16, 2020 2:56 pm
Location: San Antonio, Texas

Re: In a moment of weakness .480 Ruger No. 1

Post by Scott Tschirhart »

Then I used the factory irons to guesstimate where to set the receiver sight. Three more rounds. Same conditions.

The first shot took out my precise aiming point which may explain the vertical pattern. Since most of my deer hunting involves shots at less than 50 yards, I would say that my initial impression is that the .480 ammo is accurate enough.
You do not have the required permissions to view the files attached to this post.
Nath
Advanced Levergunner
Posts: 8660
Joined: Sat Sep 08, 2007 1:41 pm
Location: England

Re: In a moment of weakness .480 Ruger No. 1

Post by Nath »

Looking good.
It would be good to see how it prints at 100yds some day.
Psalm ch8.

Because I wish I could!
Dusty Texian
Levergunner 2.0
Posts: 432
Joined: Mon Feb 11, 2013 11:11 am
Location: Texas

Re: In a moment of weakness .480 Ruger No. 1

Post by Dusty Texian »

Scott Tschirhart wrote: Sun Jul 24, 2022 12:43 pm Then I used the factory irons to guesstimate where to set the receiver sight. Three more rounds. Same conditions.

The first shot took out my precise aiming point which may explain the vertical pattern. Since most of my deer hunting involves shots at less than 50 yards, I would say that my initial impression is that the .480 ammo is accurate enough.
Scott that should be a Hog Thumper for sure . Looking promising !
User avatar
CowboyTutt
Advanced Levergunner
Posts: 3789
Joined: Tue Sep 11, 2007 8:27 pm
Location: Mission Viejo, CA

Re: In a moment of weakness .480 Ruger No. 1

Post by CowboyTutt »

Minute of deer at 100 at least, should be adequate for that purpose. Scott, are those bullets XTP's or XTP Mags? Just curious. I'm sure the rifle velocity is much higher than pistol. Does anyone with a 480 Puma have some velocity numbers with a 325 grain bullet by chance? -Tutt
"It ain't dead! As long as there's ONE COWBOY taking care of ONE COW, it ain't dead!!!" (the Cowboy Way)
-Monte Walsh (Selleck version)

"These battered wings still kick up dust." -Peter Gabriel
User avatar
Scott Tschirhart
Advanced Levergunner
Posts: 4559
Joined: Fri Oct 16, 2020 2:56 pm
Location: San Antonio, Texas

Re: In a moment of weakness .480 Ruger No. 1

Post by Scott Tschirhart »

I'm sure that they are XTP mags as I think that is what Hornady loads for this cartridge.

Recoil is noticeable but certainly not anything to get flinchy about. Recoil seems to be straight back without noticeable rise in the muzzle.

It was awfully hot out there and I did not want to sweat too much on this pretty gun. I'll take it out to 100 yards next time.
User avatar
CowboyTutt
Advanced Levergunner
Posts: 3789
Joined: Tue Sep 11, 2007 8:27 pm
Location: Mission Viejo, CA

Re: In a moment of weakness .480 Ruger No. 1

Post by CowboyTutt »

Had some time to look it up, your right, 325 XTP mag bullets. Your good to go. Nice that the recoil is straight back with little muzzle rise. Sounds like a very nice rifle for sure! :D -Tutt
"It ain't dead! As long as there's ONE COWBOY taking care of ONE COW, it ain't dead!!!" (the Cowboy Way)
-Monte Walsh (Selleck version)

"These battered wings still kick up dust." -Peter Gabriel
Pisgah
Senior Levergunner
Posts: 1838
Joined: Thu Sep 06, 2007 9:01 pm
Location: SC

Re: In a moment of weakness .480 Ruger No. 1

Post by Pisgah »

Personally, once the cartridges get beefier than the .44 mag the No. 1 seems more appropriate to me than any revolver. That's going to be the absolute Hammer of Thor under 100 yards...
User avatar
2ndovc
Advanced Levergunner
Posts: 9453
Joined: Fri Sep 07, 2007 11:59 am
Location: OH, South Shore of Lake Erie

Re: In a moment of weakness .480 Ruger No. 1

Post by 2ndovc »

Very cool!

I would think that would take care of just about anything running around Texas.

Nice rifle!

jb 8)
jasonB " Another Dirty Yankee"


" Tomorrow the sun will rise. Who knows what the tide could bring?"
Post Reply