Lefever G Grade 10 gauge

Welcome to the Leverguns.Com Forum. This is a high-class place so act respectable. We discuss most anything here ... politely.

Moderators: AmBraCol, Hobie

Forum rules
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.

Please post political post in the new Politics forum.
Post Reply
User avatar
6pt-sika
Advanced Levergunner
Posts: 9732
Joined: Wed Dec 19, 2007 7:15 pm
Location: Virginia

Lefever G Grade 10 gauge

Post by 6pt-sika »

I picked up a Lefever G Grade circa 1902 10 gauge . Gun has very nice 30" barrels that seem to be modified and full . Bores on this gun are bright and the barrels are not cut andtgeyring true theentirelengthof both barrels . Now for the negative , at some point the stock was replaced with a Fajen . The trigger guard was changed a bit and the sear springs as well as a couple screws need to be replaced . On a side note I have old original springs and screws on the way . Also have a KickEez to install on the Fajen stock . Hopefully this gun will be back together week after next as well as the pad fit . Then hopefully I can pattern my buckshot loads in this old gun .



Image

Image

Image


Image

Image


Image
Parkers , Mannlicher Schoenauer’s , 6.5mm's and my family in the Philippines !
User avatar
gamekeeper
Spambot Zapper
Posts: 18397
Joined: Thu Sep 06, 2007 3:32 pm
Location: Englandistan twinned with the third world.

Re: Lefever G Grade 10 gauge

Post by gamekeeper »

I have never had the pleasure of handling a Lefever shotgun, I know they have a good reputation, so I'm interested in how well it shoots. Nice to see the top lever in the correct place... :D
Whatever you do always give 100%........... unless you are donating blood.
User avatar
6pt-sika
Advanced Levergunner
Posts: 9732
Joined: Wed Dec 19, 2007 7:15 pm
Location: Virginia

Re: Lefever G Grade 10 gauge

Post by 6pt-sika »

gamekeeper wrote:I have never had the pleasure of handling a Lefever shotgun, I know they have a good reputation, so I'm interested in how well it shoots. Nice to see the top lever in the correct place... :D
I "almost" bought a Lefever live pigeon gun a couple years ago . It was a higher grade , no safety , English stock , 32" full and fuller barrels . And the stock dimensions were shall we say closer to the dimensions of today , very little of any drop in the stock . I had a Parker VH that was about the same except it had a safety .
Parkers , Mannlicher Schoenauer’s , 6.5mm's and my family in the Philippines !
User avatar
GunnyMack
Advanced Levergunner
Posts: 11716
Joined: Mon Sep 19, 2016 7:57 am
Location: Not where I want to be!

Re: Lefever G Grade 10 gauge

Post by GunnyMack »

Looks like a good on 6 pt! Shame it has original stock missing. Last LeFever I saw around here was loose, re blued ( poorly) and over priced!
BROWN LABS MATTER !!
Pete44ru
Advanced Levergunner
Posts: 11242
Joined: Sun Sep 02, 2007 7:26 am

Re: Lefever G Grade 10 gauge

Post by Pete44ru »

6pt-sika wrote:
I picked up a Lefever G Grade circa 1902 10 gauge .

at some point the stock was replaced with a Fajen .



I'm impressed that someone actually found a new stock for an old double, never mind an Uncle Dan's !

It looks like it'll be fun to shoot !


.
User avatar
Pitchy
Advanced Levergunner
Posts: 13146
Joined: Tue Mar 01, 2011 9:15 am
Location: Minnesooooota

Re: Lefever G Grade 10 gauge

Post by Pitchy »

That`s really nice, grats and thanks for showing it. 8)
Because I Can, and Have
-------------------------------------------------------------
USAF-72-76
God Bless America.
Disclaimer, not responsible for anyone copying or building anything i make.
Always consult an expert first.
User avatar
6pt-sika
Advanced Levergunner
Posts: 9732
Joined: Wed Dec 19, 2007 7:15 pm
Location: Virginia

Re: Lefever G Grade 10 gauge

Post by 6pt-sika »

Pete44ru wrote:
6pt-sika wrote:
I picked up a Lefever G Grade circa 1902 10 gauge .

at some point the stock was replaced with a Fajen .



I'm impressed that someone actually found a new stock for an old double, never mind an Uncle Dan's !

It looks like it'll be fun to shoot !


.
Well Fajen's been outta business for about 15 years and I would "assume" this gun was restocked before that . Anyway I'll keep my eyes open for an old usable original stock . Thought the fellow I got the springs from might have and old used stock but he said he didn't have a decent one that would fit s 10 . The Fajen actually has a bit of figure , might get a stockmaker friend to checker it and get a Lefever grip cap . That might just satisfy me !
Parkers , Mannlicher Schoenauer’s , 6.5mm's and my family in the Philippines !
User avatar
6pt-sika
Advanced Levergunner
Posts: 9732
Joined: Wed Dec 19, 2007 7:15 pm
Location: Virginia

Re: Lefever G Grade 10 gauge

Post by 6pt-sika »

This summer might refresh the Damascus barrels . My gunsmith buddy is getting pretty decent with the process to bring the Damascus patterns back out . Incidentally I heard yesterday Dale Edmunds is no longer accepting barrels and when he's finished doing the ones he has on hand he will retire .
Parkers , Mannlicher Schoenauer’s , 6.5mm's and my family in the Philippines !
Post Reply