So I dusted off my MEC 700 that I converted to 410. It's been at least 25 years since I used it last. Of course I don't have the correct bushing(yet), weighed out powder charges for test loads.
I go to crimp and for the life of me can't make it crimp 2&1/2"!
Get on MEC site, NO EMAIL SUPPORT OR PHONE NUMBER!!
Finally find my machine and look at owners manual on the site, maybe the adjustment they give will work- maybe not!
Grrrrrr!
Why don't companies list tech support
Forum rules
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
-
GunnyMack
- Advanced Levergunner
- Posts: 11716
- Joined: Mon Sep 19, 2016 7:57 am
- Location: Not where I want to be!
Why don't companies list tech support
BROWN LABS MATTER !!
-
GunnyMack
- Advanced Levergunner
- Posts: 11716
- Joined: Mon Sep 19, 2016 7:57 am
- Location: Not where I want to be!
Re: Why don't companies list tech support
Ah-ha!!!
Got smart about it!! Just had to walk away for a bit.
They aren't perfect but they'll do!
Got smart about it!! Just had to walk away for a bit.
They aren't perfect but they'll do!
You do not have the required permissions to view the files attached to this post.
BROWN LABS MATTER !!