My first made in 2015 Levergun!!
Forum rules
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
- vancelw
- Advanced Levergunner
- Posts: 3950
- Joined: Mon Sep 28, 2009 1:56 pm
- Location: 90% NE Texas and 10% SE Montana
My first made in 2015 Levergun!!
This came to my FFL today All shiny and new. I am very pleased with fit and finish. Nice wood with satin finish. And no SILLY safety.
I ran home like a little kid at Christmas. Cleaned the bore and wiped it down, then loaded a mag full (10) and let her rip
I had to buy it to keep this company... Cimarron (by Uberti) 24" octagon bbl with case colored lever in .45 Colt. And it has .45 Colt on the barrel, not 45 LC.
I traded an old Tikka M595 Varmint rifle for it last week.
Winchester labeled, made by Miroku. 357/.38 Special. 20" bblI ran home like a little kid at Christmas. Cleaned the bore and wiped it down, then loaded a mag full (10) and let her rip
I had to buy it to keep this company... Cimarron (by Uberti) 24" octagon bbl with case colored lever in .45 Colt. And it has .45 Colt on the barrel, not 45 LC.
I traded an old Tikka M595 Varmint rifle for it last week.
You do not have the required permissions to view the files attached to this post.
"Make yourself an honest man, and then you may be sure that there is one less scoundrel in the world." - Thomas Carlyle
Re: My first made in 2015 Levergun!!
You ran to the wrong home ,my door was open too you know!
Rumble.com/ hickock45
- vancelw
- Advanced Levergunner
- Posts: 3950
- Joined: Mon Sep 28, 2009 1:56 pm
- Location: 90% NE Texas and 10% SE Montana
Re: My first made in 2015 Levergun!!
Ha! My FFL is a good friend. His son mans the store most of the time.4t5 wrote:You ran to the wrong home ,my door was open too you know!
As I was filling out my paperwork, he was coon-fingering my new toy!
I made him quit...didn't want his nasty fingerprints all over it
He's so young (at 23) I had to tell him three times what the gun was, and I still don't think he understood.
"Make yourself an honest man, and then you may be sure that there is one less scoundrel in the world." - Thomas Carlyle
Re: My first made in 2015 Levergun!!
That's the .357 I want....We require a sort of field test with target pics
The Rotten Fruit Always Hits The Ground First
Proud Life Member Of:
NRA
Second Amendment Foundation
Citizens Committee For The Right To Keep And Bear Arms
DAV
Proud Life Member Of:
NRA
Second Amendment Foundation
Citizens Committee For The Right To Keep And Bear Arms
DAV
-
- Advanced Levergunner
- Posts: 4145
- Joined: Fri Dec 21, 2007 11:34 am
- Location: north of Palacios about 1400 miles
Re: My first made in 2015 Levergun!!
So which action do you like better? The 66 or 73
30/30 Winchester: Not accurate enough fer varmints, barely adequate for small deer; BUT In a 10" to 14" barrelled pistol; is good for moose/elk to 200 yards; ground squirrels to 300 metres
250 Savage... its what the 223 wishes it could be...!
250 Savage... its what the 223 wishes it could be...!
Re: My first made in 2015 Levergun!!
Wow! Nice gun
- Sixgun
- Posting leader...
- Posts: 19243
- Joined: Sun Sep 16, 2007 7:17 pm
- Location: S.E. Pa. Where The Finest Winchesters & Colts Reside
Re: My first made in 2015 Levergun!!
Vance, nice snag. I did handle one last fall, and was impressed with the fit and finish. As you know, I'm not a big fan of imported guns but the Japs make the best of them.
Sure would be interested in groove diameter and how well it punches holes at 100 yards.---6
Sure would be interested in groove diameter and how well it punches holes at 100 yards.---6
- vancelw
- Advanced Levergunner
- Posts: 3950
- Joined: Mon Sep 28, 2009 1:56 pm
- Location: 90% NE Texas and 10% SE Montana
Re: My first made in 2015 Levergun!!
I love buying American when I can...but I also like quality no matter where it comes from. I got this from Bud's Guns.Sixgun wrote:Vance, nice snag. I did handle one last fall, and was impressed with the fit and finish. As you know, I'm not a big fan of imported guns but the Japs make the best of them.
Sure would be interested in groove diameter and how well it punches holes at 100 yards.---6
I'm probably going to zero this at 100 yards. I don't have any shooting events near me so I just plink, hunt, and shoot varmints. So, I'm interested in seeing how she groups. It is D&T's for a tang sight, so if I can't do as well as I like with the open sights I may install a tang sight and see if I improve.
Right now, my range (back yard) is a swamp. We've had 3 weeks of snow, sleet, rain in various orders and I've made a mud canyon trail to the target. If the wind and sun will dry us out some I have lots of shooting to do. I'll try to get better pictures too. It's cloudy and misting today.
As far as liking the 66 or 73 better. I don't know yet. This 73 seems very smooth right out of the box. I've not shot my 66 much as I just traded for it last Sunday.
"Make yourself an honest man, and then you may be sure that there is one less scoundrel in the world." - Thomas Carlyle
- crs
- Advanced Levergunner
- Posts: 3154
- Joined: Thu Sep 06, 2007 10:32 am
- Location: Republic of Texas
- Contact:
Re: My first made in 2015 Levergun!!
You do know how to enjoy retirement!
When you get that .357 broken in, we can take a turn at shooting each others' Winchester .357.
Mine is an old 1892 :
When you get that .357 broken in, we can take a turn at shooting each others' Winchester .357.
Mine is an old 1892 :
CRS, NRA Benefactor Member, TSRA, DRSS, DWWC, Whittington Center
Android Ballistics App at http://www.xplat.net/
Android Ballistics App at http://www.xplat.net/
-
- Senior Levergunner
- Posts: 1000
- Joined: Sat Sep 08, 2007 4:02 pm
- Location: WY
Re: My first made in 2015 Levergun!!
Win (Miroku) 73 in 357 and Uberti 73 in 45 Colt, for retirement toys. Same as mine. Dang, you must be a brother by another mother. Enjoy yours; I sure do enjoy mine.
- CowboyTutt
- Advanced Levergunner
- Posts: 3789
- Joined: Tue Sep 11, 2007 8:27 pm
- Location: Mission Viejo, CA
Re: My first made in 2015 Levergun!!
Vance, thinking that is a mighty fine rifle! I don't care who made it myself. -Tutt
"It ain't dead! As long as there's ONE COWBOY taking care of ONE COW, it ain't dead!!!" (the Cowboy Way)
-Monte Walsh (Selleck version)
"These battered wings still kick up dust." -Peter Gabriel
-Monte Walsh (Selleck version)
"These battered wings still kick up dust." -Peter Gabriel
Re: My first made in 2015 Levergun!!
Looks nice, congratulations!
If you're gonna be stupid ya gotta be tough-
Isiah 55:8&9
It's easier to fool people than it is to convince them they have been fooled.
Isiah 55:8&9
It's easier to fool people than it is to convince them they have been fooled.
- gamekeeper
- Spambot Zapper
- Posts: 17682
- Joined: Thu Sep 06, 2007 3:32 pm
- Location: Over the pond unfortunately.
Re: My first made in 2015 Levergun!!
That is one rifle I'd really love to own, congratulations.....
Whatever you do always give 100%........... unless you are donating blood.
- Canuck Bob
- Senior Levergunner
- Posts: 1830
- Joined: Sun Oct 11, 2009 11:57 am
- Location: Calgary, Canada
Re: My first made in 2015 Levergun!!
Nice, i love my Winoku 92! Let us know how it feeds 38 Special if you ever try them.
-
- Levergunner 3.0
- Posts: 588
- Joined: Wed Dec 31, 2008 10:31 pm
- Location: Western pa
Re: My first made in 2015 Levergun!!
as hard as 22 ammo is to get that will be a sweet plinker even if you feel it's not a long range shooter.I don't see how you could go wrong.
JOHNNY WACKO
http://mysite.verizon.net/vzevezzx/john ... dproducts/
http://mysite.verizon.net/vzevezzx/john ... dproducts/
- vancelw
- Advanced Levergunner
- Posts: 3950
- Joined: Mon Sep 28, 2009 1:56 pm
- Location: 90% NE Texas and 10% SE Montana
Re: My first made in 2015 Levergun!!
I don't have any lead .38 Special ammo around right now. Yesterday I grabbed 5 rounds of 130 gr MC Remington and put it in the magazine tube. It all fed and fired smoothly. Dropped the brass right at my feet. You have to work the action smartly to get it to pop the brass up and out. If you were to try and work it slow, you might get some brass that fails to fly up out of the action and cause a jam or stovepipe.Canuck Bob wrote:Nice, i love my Winoku 92! Let us know how it feeds 38 Special if you ever try them.
I've got 3 or 4 different .357 moulds I plan to try. The only problem I foresee might be the 125 gr wadcutters. The rounds feed straight in.
I like it! I was a bit leery of spending the money ($1K+) but this is a fine quality rifle. And, I already mentioned it, NO SILLY SAFETY or rebounding hammer. (Wish I could say the same for my mid-90s 92)
EDIT: I used the 130 gr MC .38 Special rounds because they were the shortest I could find around the house. I think I just remembered where a stash or 357s are (too much hoarding, if there is such a thing) Since it's about 45 degrees warmer today than it's been in a long time, my targets are calling!!!
Last edited by vancelw on Tue Mar 17, 2015 4:33 pm, edited 1 time in total.
"Make yourself an honest man, and then you may be sure that there is one less scoundrel in the world." - Thomas Carlyle
- vancelw
- Advanced Levergunner
- Posts: 3950
- Joined: Mon Sep 28, 2009 1:56 pm
- Location: 90% NE Texas and 10% SE Montana
Re: My first made in 2015 Levergun!!
These are merely one week's purchaseLeverluver wrote:Win (Miroku) 73 in 357 and Uberti 73 in 45 Colt, for retirement toys. Same as mine. Dang, you must be a brother by another mother. Enjoy yours; I sure do enjoy mine.
In the past 12 months.....
Model 1873 Winchester (Miroku) 357
1866 Winchester (Cimarron-Uberti) .45 Colt
336 Marlin (ca 1949) .32 Special
1866 Uberti .44-40 carbine
1860 transitional Uberti .45 Colt
BL22 Browning .22 LR
1895 Winchester (miroku) .405 Win
1886 Browning SRC .45-70
94 Winchester (ca 1967) .30-30
I'm sure I left a few out I have got to stop buying and start shooting more. Retirement should be spent shooting.
Oh! Not levers, but a Baikal double rifle and a Sabatti 92 Express, both in .45-70. So far, they are both really good shooters!
"Make yourself an honest man, and then you may be sure that there is one less scoundrel in the world." - Thomas Carlyle
- Griff
- Posting leader...
- Posts: 21016
- Joined: Sat Mar 31, 2007 4:56 pm
- Location: OH MY GAWD they installed a STOP light!!!
Re: My first made in 2015 Levergun!!
Vance, congrats on the new '73 & '66! Next time we have a NoTex "get-together" we'll have to make it a shootin' event. Give us all a chance to show off our toys! If only there was nearby cowboy lever silhouette on the 3rd weekend of the month.
Griff,
SASS/CMSA #93
NRA Patron
GUSA #93
There is a fine line between hobby & obsession!
AND... I'm over it!!
No I ain't ready, but let's do it anyway!
SASS/CMSA #93
NRA Patron
GUSA #93
There is a fine line between hobby & obsession!
AND... I'm over it!!
No I ain't ready, but let's do it anyway!
-
- Senior Levergunner
- Posts: 1000
- Joined: Sat Sep 08, 2007 4:02 pm
- Location: WY
Re: My first made in 2015 Levergun!!
Didn't say that was all I had It is a disease isn't it?vancelw wrote:These are merely one week's purchaseLeverluver wrote:Win (Miroku) 73 in 357 and Uberti 73 in 45 Colt, for retirement toys. Same as mine. Dang, you must be a brother by another mother. Enjoy yours; I sure do enjoy mine.
In the past 12 months.....
Model 1873 Winchester (Miroku) 357
1866 Winchester (Cimarron-Uberti) .45 Colt
336 Marlin (ca 1949) .32 Special
1866 Uberti .44-40 carbine
1860 transitional Uberti .45 Colt
BL22 Browning .22 LR
1895 Winchester (miroku) .405 Win
1886 Browning SRC .45-70
94 Winchester (ca 1967) .30-30
I'm sure I left a few out I have got to stop buying and start shooting more. Retirement should be spent shooting.
Oh! Not levers, but a Baikal double rifle and a Sabatti 92 Express, both in .45-70. So far, they are both really good shooters!
Marlin 1984CL 32-20
Uberti 1873 32-20
Browning 1895 30-40
Win Dlx 71 (1936) 348
Browning 71 Carbine 348
Browning 71 Rifle 348AI
Win(Mir) 1873 357M
Win(Mir) 1895 405W
Browning 1892 44Mag
Rossi RH 44mag
Rossi 1892 45Colt
Uberti 1873 45Colt
Uberti 1876 45-60
Browning 1886 45-70
Win(Mir) 1886UL 45-70
- Paladin
- Senior Levergunner
- Posts: 1932
- Joined: Mon Jan 21, 2008 9:55 am
- Location: Not Working (much)
Re: My first made in 2015 Levergun!!
Nice Rifles willing to wait for a range report as they are not spear-guns
It is not the critic who counts