OT/ Stevens 311 is Home

Welcome to the Leverguns.Com Forum. This is a high-class place so act respectable. We discuss most anything here ... politely.

Moderators: AmBraCol, Hobie

Forum rules
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.

Please post political post in the new Politics forum.
Post Reply
pwl44m
Advanced Levergunner
Posts: 3613
Joined: Sat Sep 04, 2010 7:48 pm
Location: East Linda Caif.

OT/ Stevens 311 is Home

Post by pwl44m »

Went and picked up My 311/410 this afternoon. Got it Home and cleaned it up a little, didn't take much. Hardest part was getting the paint flecks off of it,it got too close to someones spray painting project, wasn't bad though. It cleaned up super nice. Doesn't look to be used much at all, looks more like it sat in a corner all it's life. The case colors on the recvr r just the way I like them (not too bright) Blue is nie unto perfect. This Gun can be Truly called like New :wink: except for a couple nicks & scratches in the Wood.
My picture taking leaves a lot to be desired but they r there. Gonna have to brush up on the Bore shot but they r Perfect-the bores that is.
Like I said in a previous post about this Gun, I have had MY Eye out for one for better than 20 years (told U I was patient). The Shop owner said that 3 people came in looking for it after I bought it. Prolly says that to all the Guys.
So here a few pics, hope U can make something of them.
OH Please excuse the messy Bench,U know what they say-a clean bench is the sign of a sick Mind-well I aint Sick.LOL
You do not have the required permissions to view the files attached to this post.
Perry in Bangor----++++===Calif
rjohns94
Advanced Levergunner
Posts: 10820
Joined: Thu Sep 06, 2007 6:02 pm
Location: York, PA

Re: OT/ Stevens 311 is Home

Post by rjohns94 »

that will be a real nice shooter. good luck with it.
Mike Johnson,

"Only those who will risk going too far, can possibly find out how far one can go." T.S. Eliot
damienph
Senior Levergunner
Posts: 1734
Joined: Mon Mar 30, 2009 11:11 am
Location: Kansas

Re: OT/ Stevens 311 is Home

Post by damienph »

I think that the Stevens 311 series are real sleepers. Worth more than they sell for. I know that you will enjoy that one.
20cows
Advanced Levergunner
Posts: 2278
Joined: Tue Apr 03, 2007 9:55 pm
Location: East West Texas

Re: OT/ Stevens 311 is Home

Post by 20cows »

I have two 311s, a 12 and a 16. :D
getitdone1
Senior Levergunner
Posts: 1302
Joined: Tue Dec 18, 2007 1:25 pm
Location: Indiana

Re: OT/ Stevens 311 is Home

Post by getitdone1 »

I have a Montgomery Wards (Wards Westernfield) 16 ga. Same gun but tenite/plastic stock. Just like the one my dad gave me long ago. Replaced the one I really should have kept. The plastic makes for a light gun.

Don
C. Cash
Advanced Levergunner
Posts: 5384
Joined: Thu Sep 06, 2007 6:02 pm

Re: OT/ Stevens 311 is Home

Post by C. Cash »

That is super nice, especially in 410. I've always liked the 311's.
But God demonstrates his own love for us in this: While we were still sinners, Christ died for us. Romans 5:8
Rusty
Advanced Levergunner
Posts: 9528
Joined: Mon Sep 03, 2007 6:37 pm
Location: Central Fla

Re: OT/ Stevens 311 is Home

Post by Rusty »

Did they use different size receivers for the different gauges?

How many different sizes did they use?
If you're gonna be stupid ya gotta be tough-
Isiah 55:8&9

It's easier to fool people than it is to convince them they have been fooled.
User avatar
Pitchy
Advanced Levergunner
Posts: 13146
Joined: Tue Mar 01, 2011 9:15 am
Location: Minnesooooota

Re: OT/ Stevens 311 is Home

Post by Pitchy »

Looks great, love mine. 8)
Because I Can, and Have
-------------------------------------------------------------
USAF-72-76
God Bless America.
Disclaimer, not responsible for anyone copying or building anything i make.
Always consult an expert first.
damienph
Senior Levergunner
Posts: 1734
Joined: Mon Mar 30, 2009 11:11 am
Location: Kansas

Re: OT/ Stevens 311 is Home

Post by damienph »

Rusty wrote:Did they use different size receivers for the different gauges?

How many different sizes did they use?
I believe that it was two different frame sizes; one for .410, larger one for others. I've only seen 12 & 16. There may be a 20 but I've never seen one.
Rusty
Advanced Levergunner
Posts: 9528
Joined: Mon Sep 03, 2007 6:37 pm
Location: Central Fla

Re: OT/ Stevens 311 is Home

Post by Rusty »

Do you mean you've never seen a 20 ga sized frame or you've never seen a 20 ga gun?
If you're gonna be stupid ya gotta be tough-
Isiah 55:8&9

It's easier to fool people than it is to convince them they have been fooled.
User avatar
Dave
Senior Levergunner
Posts: 1658
Joined: Sun Sep 09, 2007 8:00 pm
Location: TN

Re: OT/ Stevens 311 is Home

Post by Dave »

Those are great guns. Congrats!
damienph
Senior Levergunner
Posts: 1734
Joined: Mon Mar 30, 2009 11:11 am
Location: Kansas

Re: OT/ Stevens 311 is Home

Post by damienph »

Rusty wrote:Do you mean you've never seen a 20 ga sized frame or you've never seen a 20 ga gun?
Never seen a 20g 311. I've seen the 12 and 16 and the smaller framed .410 bore.
pwl44m
Advanced Levergunner
Posts: 3613
Joined: Sat Sep 04, 2010 7:48 pm
Location: East Linda Caif.

Re: OT/ Stevens 311 is Home

Post by pwl44m »

Surely if they made 12-16 & 410 they made a 20. Anyone care to chime in that is in possesion of a 20 ga.
Perry in Bangor----++++===Calif
C. Cash
Advanced Levergunner
Posts: 5384
Joined: Thu Sep 06, 2007 6:02 pm

Re: OT/ Stevens 311 is Home

Post by C. Cash »

Yes they definitley made 20's. My friend has one.....my wife favorite for skeet.
But God demonstrates his own love for us in this: While we were still sinners, Christ died for us. Romans 5:8
damienph
Senior Levergunner
Posts: 1734
Joined: Mon Mar 30, 2009 11:11 am
Location: Kansas

Re: OT/ Stevens 311 is Home

Post by damienph »

C. Cash wrote:Yes they definitley made 20's. My friend has one.....my wife favorite for skeet.
Is it same frame size as 12 & 16?
C. Cash
Advanced Levergunner
Posts: 5384
Joined: Thu Sep 06, 2007 6:02 pm

Re: OT/ Stevens 311 is Home

Post by C. Cash »

damienph wrote:
C. Cash wrote:Yes they definitley made 20's. My friend has one.....my wife favorite for skeet.
Is it same frame size as 12 & 16?
That is a good question......I think it is except for the recoil shields. I would think a different reciever is used for the shield sizes alone no? Have to look into it.....
But God demonstrates his own love for us in this: While we were still sinners, Christ died for us. Romans 5:8
Twodot
Levergunner 2.0
Posts: 310
Joined: Wed Apr 06, 2011 1:34 pm
Location: Montana

Re: OT/ Stevens 311 is Home

Post by Twodot »

Nice little double.



An uncluttered work bench is a sign of a ( fill in the blank ) :wink:
..
marlin shooter
Levergunner 2.0
Posts: 173
Joined: Thu Sep 13, 2007 4:01 pm
Location: New England

Re: OT/ Stevens 311 is Home

Post by marlin shooter »

I believe the receiver is the same for 12, 16, 20. Difference seems to be in barrel contour. They are a pretty stout shotgun, not a "fine" shotgun like other american double's. I have a steven's 5000 16 gauge with 26" bbl and Mod/ imp choke. I bought it about 15 years ago. When I bought it if you fired the rear trigger first the front would go off during recoil. When I had a snap cap in it I could give the buttstock a good rap and the front trigger would trip. Bought new part's at numrich and good to go. It is my favorite grouse gun. I would like a .410, but kinda pricey. Good luck with your's.
Karl
User avatar
kimwcook
Advanced Levergunner
Posts: 7978
Joined: Tue Sep 04, 2007 10:01 pm
Location: Soap Lake, WA., U.S.A.

Re: OT/ Stevens 311 is Home

Post by kimwcook »

Looks like a nice shotgun. I've got one and I need to replace the wood. Doesn't look near as nice as yours though.
Old Law Dawg
pwl44m
Advanced Levergunner
Posts: 3613
Joined: Sat Sep 04, 2010 7:48 pm
Location: East Linda Caif.

Re: OT/ Stevens 311 is Home

Post by pwl44m »

@ MS, "kinda pricey" is what has kept Me at bay for so long. I normally don't even look at the Shotguns in this particular Store.
Thx for the comments Guys.
As for the recvr size, I measured Mine at 1 5/8 in across the face of the recvr. In looking at it it does look kinda small. Anybody got a 12 ga to measure ?
Perry in Bangor----++++===Calif
C. Cash
Advanced Levergunner
Posts: 5384
Joined: Thu Sep 06, 2007 6:02 pm

Re: OT/ Stevens 311 is Home

Post by C. Cash »

My 1960's vitange Stevens 311...has the contoured reciever sides near hinge pin, unserial numbered:

All rough measurements.....
From bottom of reciever to top of recoil shields: 2.180"
Width of reciever from side to side: 1.577"
Length of Reciever at bottom(includes forearm spacer), to where it meets buttstock: 3 and 15/16"
But God demonstrates his own love for us in this: While we were still sinners, Christ died for us. Romans 5:8
pwl44m
Advanced Levergunner
Posts: 3613
Joined: Sat Sep 04, 2010 7:48 pm
Location: East Linda Caif.

Re: OT/ Stevens 311 is Home

Post by pwl44m »

C.Cash, is that Ur 20 ga ? sounds like same measurement across the face of recvr. I'll pull a tape on the other points and c what I come up with.
Perry in Bangor----++++===Calif
C. Cash
Advanced Levergunner
Posts: 5384
Joined: Thu Sep 06, 2007 6:02 pm

Re: OT/ Stevens 311 is Home

Post by C. Cash »

Hey Perry,

No it's the 12 Gauge. I can't get my hands on my buddies 20 Gauge right now. All I remember was the recoil shields were smaller and the barrels a good bit narrower as one would expect on the smaller gauge.
But God demonstrates his own love for us in this: While we were still sinners, Christ died for us. Romans 5:8
sandspur6
Levergunner
Posts: 1
Joined: Mon May 19, 2008 12:17 pm
Location: NW Florida

Re: OT/ Stevens 311 is Home

Post by sandspur6 »

Got two 12 gauge 311's. Both pre-serial number models. Both with 18" barrels. Awesome "behind the bedroom door" guns.
Retired Deputy Sheriff

In God We Trust (All others get run through NCIC.)
win7094M1
Levergunner 2.0
Posts: 113
Joined: Thu Dec 17, 2009 9:44 pm
Location: Central Virginia

Re: OT/ Stevens 311 is Home

Post by win7094M1 »

My dad had a 16 gauge IC/modified 311 when I was a kid. It had uncheckered walnut wood as I recall. He had stopped hunting birds by the time I came along so it was strictly a working farm gun.
In those days, the nearby townsfolk got rid of unwanted dogs by simply driving a few miles into the country and letting them loose. The usual result was roaming packs of dogs who killed livestock and prevented kids from playing outside.
Dad and the neighbors kept the guns close at hand while on their properties and would gradually kill off the packs.
When I turned ten, he voiced his intent to sell the 311 in order to buy "us" a .22 rifle. He sold it in November 1968 to the local fire department. They raffled it off to raise money.
Dad died of a massive heart attack the next month.
When I was in high school, I tried in vain to track down Dad's gun.
I did finally get my first.22 when I was 14. My brother in law bought it for me and started my shooting education. He is truly one of my father figures and is very ill as we speak. Please pray for his comfort and peace.
Sorry for the long post...
Winchester M94 30-30 (1980)
Winchester M70 Westerner 30-06 (1982)
Winchester M1 Garand (1942)
Too many others to list - hope to add more levers soon.
win7094M1
Levergunner 2.0
Posts: 113
Joined: Thu Dec 17, 2009 9:44 pm
Location: Central Virginia

Re: OT/ Stevens 311 is Home

Post by win7094M1 »

Update - My brother in law passed away on September 19. He will always be missed. Sounds like an excellent and fitting reason to find a 16 gauge 311 to honor both him and my Dad.
Winchester M94 30-30 (1980)
Winchester M70 Westerner 30-06 (1982)
Winchester M1 Garand (1942)
Too many others to list - hope to add more levers soon.
BigSky56
Advanced Levergunner
Posts: 2356
Joined: Mon Sep 03, 2007 6:49 pm
Location: NW Montana

Re: OT/ Stevens 311 is Home

Post by BigSky56 »

May he RIP, it hurts when you loose someone you respected and cared for that had a influence in your life my condolences to you and your family. danny
MrMurphy
Senior Levergunner
Posts: 1947
Joined: Mon Jan 19, 2009 12:32 pm

Re: OT/ Stevens 311 is Home

Post by MrMurphy »

Nice piece.

Back in the day, NYPD had short barreled 311's for detectives, mostly because they figured they weren't gun guys and not too many people can screw up a double barrel.



On the pics: Having a neutral background (bedsheet, etc) and something to partially prop the piece up (book, spare magazine for a rifle, etc) will help the pics come out better and not look so visually cluttered.
grouse
Levergunner 1.0
Posts: 77
Joined: Sun Sep 11, 2011 6:18 pm

Re: OT/ Stevens 311 is Home

Post by grouse »

Concrats on the 311! Double 410's are a hoot to own & shoot!
win7094M1
Levergunner 2.0
Posts: 113
Joined: Thu Dec 17, 2009 9:44 pm
Location: Central Virginia

Re: OT/ Stevens 311 is Home

Post by win7094M1 »

What a great squirrel shotgun this would be! The .410 bore is a huge favorite for squirrel in NW NC/SW VA. Enjoy it!
Winchester M94 30-30 (1980)
Winchester M70 Westerner 30-06 (1982)
Winchester M1 Garand (1942)
Too many others to list - hope to add more levers soon.
20cows
Advanced Levergunner
Posts: 2278
Joined: Tue Apr 03, 2007 9:55 pm
Location: East West Texas

Re: OT/ Stevens 311 is Home

Post by 20cows »

win7094M1, your family is in our prayers.


The shields are different for all the gauges. I have a 12 and a 16, my brother in law has a 20 and Dad has a 410.
Post Reply