acu'rzr
Forum rules
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
acu'rzr
how many of you all use paco's tool?
i have a bunch of different 22s any body have
input as to which setup to purchase?
have printed the order form but agonize over
whether i should get one at a time with more
diameters or 3/4 at a time with fewer.
likes/dislikes , wish you had done it differently?
thanks pokey
i have a bunch of different 22s any body have
input as to which setup to purchase?
have printed the order form but agonize over
whether i should get one at a time with more
diameters or 3/4 at a time with fewer.
likes/dislikes , wish you had done it differently?
thanks pokey
careful what you wish for, you might just get it.
"BECAUSE I CAN"
"BECAUSE I CAN"
- AJMD429
- Posting leader...
- Posts: 32800
- Joined: Sun Sep 09, 2007 10:03 am
- Location: Hoosierland
- Contact:
Re: acu'rzr
I know this is a non-answer, but I got one mid-winter, and plan on using once the weather is warmer, to do some testing on a couple of my .22's, so I will also be checking this thread for responses!
I got the two-hole, four-chamber, one, and it seems well made.
One question I've wondered about is if it would be better to use it in sort of a 'nutcracker' press, as opposed to with a mallet, just to get more uniformity.
I got the two-hole, four-chamber, one, and it seems well made.
One question I've wondered about is if it would be better to use it in sort of a 'nutcracker' press, as opposed to with a mallet, just to get more uniformity.
Doctors for Sensible Gun Laws
"first do no harm" - gun control LAWS lead to far more deaths than 'easy access' ever could.
Want REAL change? . . . . . "Boortz/Nugent in 2012 . . . ! "
"first do no harm" - gun control LAWS lead to far more deaths than 'easy access' ever could.
Want REAL change? . . . . . "Boortz/Nugent in 2012 . . . ! "
-
- Advanced Levergunner
- Posts: 5670
- Joined: Mon Apr 09, 2007 7:13 pm
- Location: DeeDee Snavely's Used Guns and Weapons
Re: acu'rzr
Bump! 'cause I want to know as well...
Nothing so needs reforming as other people's habits.
-Mark Twain
Proverbs 3:5; Philippians 4:13
Got to have a Jones for this
Jones for that
This running with the Joneses boy
Just ain't where it's at
-Mark Twain
Proverbs 3:5; Philippians 4:13
Got to have a Jones for this
Jones for that
This running with the Joneses boy
Just ain't where it's at
Re: acu'rzr
c'mon somebody knows sumthin.
spit it out.
spit it out.
careful what you wish for, you might just get it.
"BECAUSE I CAN"
"BECAUSE I CAN"
Re: acu'rzr
Tell Paco what you'll use the ammo in and he'll fix you up. I'm all for the maximum number of options. The tool works well once you get the "feel" for it. It is NOT for ham handed or inattentive operators.
You might realize that not everyone LIVES here.c'mon somebody knows sumthin.
spit it out.
Sincerely,
Hobie
"We are all travelers in the wilderness of this world, and the best that we find in our travels is an honest friend." Robert Louis Stevenson
Hobie
"We are all travelers in the wilderness of this world, and the best that we find in our travels is an honest friend." Robert Louis Stevenson
-
- Advanced Levergunner
- Posts: 5670
- Joined: Mon Apr 09, 2007 7:13 pm
- Location: DeeDee Snavely's Used Guns and Weapons
Re: acu'rzr
Yup, some of us just crash on the couch for months at a time...Hobie wrote:You might realize that not everyone LIVES here.
Nothing so needs reforming as other people's habits.
-Mark Twain
Proverbs 3:5; Philippians 4:13
Got to have a Jones for this
Jones for that
This running with the Joneses boy
Just ain't where it's at
-Mark Twain
Proverbs 3:5; Philippians 4:13
Got to have a Jones for this
Jones for that
This running with the Joneses boy
Just ain't where it's at
- AJMD429
- Posting leader...
- Posts: 32800
- Joined: Sun Sep 09, 2007 10:03 am
- Location: Hoosierland
- Contact:
Re: acu'rzr
Wait a minute - I thought it was required to make it your home page...Hobie wrote:You might realize that not everyone LIVES here.
Doctors for Sensible Gun Laws
"first do no harm" - gun control LAWS lead to far more deaths than 'easy access' ever could.
Want REAL change? . . . . . "Boortz/Nugent in 2012 . . . ! "
"first do no harm" - gun control LAWS lead to far more deaths than 'easy access' ever could.
Want REAL change? . . . . . "Boortz/Nugent in 2012 . . . ! "
-
- Levergunner 2.0
- Posts: 309
- Joined: Mon Sep 03, 2007 2:45 pm
- Location: purt near in the middle of Ok.
Re: acu'rzr
Yes,I bought one.
I bought the cheapie model because thats how I do things.
I found little difference through the marlin.
The Henry"s showed enough improvement to pay for the tool.
What was surprising was my 35 yr old Browning, (which is my base for 22s, showed improvement)
Buy one you wont be sorry.
I bought the cheapie model because thats how I do things.
I found little difference through the marlin.
The Henry"s showed enough improvement to pay for the tool.
What was surprising was my 35 yr old Browning, (which is my base for 22s, showed improvement)
Buy one you wont be sorry.
grit yer teeth an pull the trigger
Re: acu'rzr
ok so i ordered the phase four model, because i have/shoot many different makes/models
of 22s , and this one had the most ranges of sizing. will let you know how things work out.
of 22s , and this one had the most ranges of sizing. will let you know how things work out.
careful what you wish for, you might just get it.
"BECAUSE I CAN"
"BECAUSE I CAN"
- AmBraCol
- Webservant
- Posts: 3703
- Joined: Fri Mar 30, 2007 8:12 am
- Location: The Center of God's Grace
- Contact:
Re: acu'rzr
pokey wrote:ok so i ordered the phase four model, because i have/shoot many different makes/models
of 22s , and this one had the most ranges of sizing. will let you know how things work out.
Don't forget the range report. I'll be picking up mine the first week of June, the Lord willing. It should prove fun to play with - if I can find ammo when I get up there...
Paul - in Pereira
"He is the best friend of American liberty who is most sincere and active in promoting true and undefiled religion." -- John Witherspoon
http://www.paulmoreland.com
http://www.pistolpackingpreachers.us
http://www.precisionandina.com
"He is the best friend of American liberty who is most sincere and active in promoting true and undefiled religion." -- John Witherspoon
http://www.paulmoreland.com
http://www.pistolpackingpreachers.us
http://www.precisionandina.com
-
- Senior Levergunner
- Posts: 1459
- Joined: Wed Feb 06, 2008 6:31 pm
- Location: Arizona Territory
Re: acu'rzr
Using a small Arbor type press will be more consistant than the plastic mallet approach.
I bought a small Arbor press from Harbor Freight that I use for such tasks. $39.00, IIRC.
I bought a small Arbor press from Harbor Freight that I use for such tasks. $39.00, IIRC.
SASS# 51223
Arizona Cowboy Shooter's Assoc.
Cowtown Cowboy Shooter's Assoc.
Uberti 73/44-40 carbine, Rossi 92/44-40,
Marlin 94CB/44 24" Limited, Winchester 94/30-30
Arizona Cowboy Shooter's Assoc.
Cowtown Cowboy Shooter's Assoc.
Uberti 73/44-40 carbine, Rossi 92/44-40,
Marlin 94CB/44 24" Limited, Winchester 94/30-30