30-30 Light Load Field Test Results

Welcome to the Leverguns.Com Forum. This is a high-class place so act respectable. We discuss most anything here ... politely.

Moderators: AmBraCol, Hobie

Forum rules
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.

Please post political post in the new Politics forum.
Post Reply
86er
Advanced Levergunner
Posts: 4703
Joined: Sat Mar 31, 2007 2:58 pm
Location: Republic of Texas

30-30 Light Load Field Test Results

Post by 86er »

RKrodle and I loaded up some 110 grain RN bullets at a velocity of 2000 fps. Ricky can provide the exact load if anyone is interested. I taught a new shooter how to use the Ranch Rifle with those loads. On the way back from lunch, I spotted a free range axis deer doe sneaking along a draw off a country road. I drove around to the other side of the draw, loaded the rifle and walked down into some brush to wait. After 20 minutes or so the doe came meandering along. At 60 yards she was broadside with her head down. I put the iron sights on her shoulder and squeezed the trigger oh so gently. At the pop she bucked up and walked stiffly some 20 yards. There she laid down but head up. I moved 20 yards and put another shot right next to the first. She got up and started walking very slowly, swaying from side to side. I shot another, creating a little triangle with the entry holes. The deer went down for good and became donated meat for a local family. Here's what happened. The deer was 70 pounds. All shots were 60 yards into the shoulder. NONE of them exited. I don't know which bullet is from which shot but they all hit the back of the shoulder and all penetrated between 5 and 7 inches. Yet each bullet acted differently. The one on the left is a mushroomed lead core, but the jacket is no where to be found. It weighs 69.7 grains. The middle one is bent and the jacket is torn but it did not expand much at all. It weights 91.6 grains. The right one expanded into a nice 40 caliber mushroom and weighs 92.1 grains. The conclusion is that while there is no recoil and very low noise, we need more penetration for deer sized stuff. If we are going to use this bullet, an increase in velocity of 300 fps is what is needed. This is based soley on mathematical data that increased things like ME, KE, BC, TKO and other ballistic influences. The mathematical conclusion is that the 300 fps will provide an additional 3.265 inches of penetration with the same exact resistance. The 2000 fps load can still be used for paper punching hitting 2 inches high at 100 yards while the same bullet at 2300 fps will hit 1/2" low at 100 yards.

Image

Image
Professional Hunter
http://www.TARSPORTING.com
"Worldwide Hunting Adventures"

Professional Hunters Assoc of South Africa
SCI - Life Member
NRA - Life Member
NAHC - Trophy Life Member
DWWC - Member
User avatar
TedH
Advanced Levergunner
Posts: 8301
Joined: Tue Apr 03, 2007 5:19 pm
Location: Missouri

Re: 30-30 Light Load Field Test Results

Post by TedH »

Great report Joe. Looks like more lead is in order. Maybe move up to 130 gr. Speers.
NRA Life Member
WCF3030
Senior Levergunner
Posts: 1244
Joined: Mon Sep 03, 2007 3:15 pm
Location: West Michigan
Contact:

Re: 30-30 Light Load Field Test Results

Post by WCF3030 »

For that sized game why not a 170-180gr cast at 1300-1400fps. Recoil is light and you should not have troubles with penitration.
That which does not kill me has made a grave tactical error.

http://thewoodsman1.blogspot.com/
User avatar
Blaine
Posting leader...
Posts: 30496
Joined: Mon Dec 17, 2007 2:22 pm
Location: Still Deciding

Re: 30-30 Light Load Field Test Results

Post by Blaine »

WCF3030 wrote:For that sized game why not a 170-180gr cast at 1300-1400fps. Recoil is light and you should not have troubles with penitration.
+1
I was thinking a 150 or so hardcast w/GC.
The Rotten Fruit Always Hits The Ground First

Proud Life Member Of:
NRA
Second Amendment Foundation
Citizens Committee For The Right To Keep And Bear Arms
DAV
RSY
Senior Levergunner
Posts: 1082
Joined: Sat Mar 31, 2007 5:09 pm
Location: Georgetown, TX

Re: 30-30 Light Load Field Test Results

Post by RSY »

I could be completely wrong, but in my limited experience with Axis deer I've come to think that their hides are more than a little tougher than, say, a whitetail's. If those are the same rounds that young Lindsay used on her blackbuck doe last month, I do recall them performing fairly up to snuff, though.

As suggested above, maybe the ranch rifle needs something a good bit heavier (and maybe slower for recoil's sake) for anything beyond blackbuck.

Scott
Bob A
Levergunner 1.0
Posts: 89
Joined: Fri Sep 07, 2007 3:16 pm
Location: Northern California

Re: 30-30 Light Load Field Test Results

Post by Bob A »

I am curious which bullet was used.
I know that Hornady, Sierra, Speer and Rem all make a 110 RN.
I suspect the Rem is much softer than the others but don't know which is tougher between
Hornady, Sierra and Speer.

Bob A
RKrodle
Senior Levergunner
Posts: 1960
Joined: Sun Sep 09, 2007 7:14 pm
Location: Texas

Re: 30-30 Light Load Field Test Results

Post by RKrodle »

The bullet is a Rem 110 gr SP for a 30 carbine. The reason we are trying to use a light bullet moving fairly slow is to cut down on recoil and noise while trying to maintain a somewhat flat trajectory. A load that a small child could use without having a bad experience. Or, that is at least what we were shooting for, pun intended :D . It's an inexpensive round that we can keep several loaded up at the ranch for any kid, or adult, who wants to learn to shoot a lever gun. The bullets appeared to hold together pretty good, other then the one shedding the jacket. But, I would like to see more penetration.
Ricky

DWWC
User avatar
Hobie
Moderator
Posts: 13902
Joined: Sat Mar 31, 2007 1:54 pm
Location: Staunton, VA, USA
Contact:

Re: 30-30 Light Load Field Test Results

Post by Hobie »

The Sierra 125 gr. FP is a good one for your purpose. You will need just a bit more velocity in any case.
Sincerely,

Hobie

"We are all travelers in the wilderness of this world, and the best that we find in our travels is an honest friend." Robert Louis Stevenson
Charles
Advanced Levergunner
Posts: 2004
Joined: Sat Dec 15, 2007 2:29 pm
Location: Deep South Texas

Re: 30-30 Light Load Field Test Results

Post by Charles »

You have reinvented the 32-20/30 Carbine and once again proved these rounds are marginal at best for deer.
Idiot
Levergunner 3.0
Posts: 767
Joined: Fri Feb 22, 2008 1:56 pm
Location: Southwest USA

Re: 30-30 Light Load Field Test Results

Post by Idiot »

Charles wrote:You have reinvented the 32-20/30 Carbine and once again proved these rounds are marginal at best for deer.
Yep.

86er, thanks for the useful information.
woods-walker
Levergunner 2.0
Posts: 130
Joined: Sat Apr 05, 2008 11:14 am
Location: Kentucky

Re: 30-30 Light Load Field Test Results

Post by woods-walker »

I'll second the effectiveness of the 130 grain Speers. My loads are moving faster over a charge of W748, light recoil but a sharper report than a .32wcf. I have yet to recover a bullet and meat damage is acceptable.
20cows
Advanced Levergunner
Posts: 2278
Joined: Tue Apr 03, 2007 9:55 pm
Location: East West Texas

Re: 30-30 Light Load Field Test Results

Post by 20cows »

I load a Lee 164 gr (ww) cast bullet to about 1200 fps a for low recoil round my son uses in his trapper.
JohndeFresno
Advanced Levergunner
Posts: 4559
Joined: Fri Sep 07, 2007 1:52 pm

Re: 30-30 Light Load Field Test Results

Post by JohndeFresno »

I'm currently experimenting with a variation of THE LOAD as crafted by the great C. E. Harris (13 gr. Red Dot for several .30 caliber or larger rifle cartridges, providing they have the case capacity). Besides being a light and effective, position insensitive target load for beginners and youth, my variation of THE LOAD is (in the words of a hungry nestling) CHEAP, CHEAP CHEAP. And that's music to my ears.

My brother-in-law uses 9.0 gr. with a 170-175 gr. FN hard cast projectile, and I have tried 10.0 gr. and liked it. However, I am currently testing 9.4 grains of Red Dot because that is what the 1.3 cc Lee Dipper measures out, given the weather conditions and temperature in Central California at the current time.

Charging problems with Red Dot shotgun powder: As an aside, my RCBS Uniflow Powder Measure cannot handle the fine flaked powder. It works its way around the charging cylinder (I guess it's called) and then comes out as no charge or an overcharge after a few good throws. And even my Lee Auto Disk setup sometimes leaks above and around the disk.

So I have moved to the dipper for using Red Dot. Brother-in-law told me that his Hornady powder dispenser does not leak; but I am out of room on my loading area and a little over-invested in hardware, anyway.

So this is the load that impresses me so far, and I will be following up with my scoped Marlin 336 at 100 yards after I load up a batch, when I can get back to the range. If there are impressive results, I will post them later. But with the many crack shots on this forum, the group will have to look like a cloverleaf or I probably won't bother to show my target! And as we all know, each rifle is different.

My load:
30-30 Winchester Marlin 336 Centennial 20 in. barrel
9.4 gr. Alliant Red Dot (Using 1.3 cc Lee Dipper)
No wad or filler needed - powder is not sensitive to position of firearm, per C. E. Harris
Winchester Super-X brass, CCI 200 Lg Rifle primers
173 gr. Montana Bullet Works FN Gas Checked, Lubed,
Brinnell Hardness 22 per company
COAL (Cartridge Overall Length) 2.510 inches
Est. velocity (not yet clocked) 1,430 fps / Calculated ME 786 ft. lbs.
Computed Taylor KO value: 10.9 (for those who like that info)
My use is for target practice, however, at adjusted dope for the lighter load
Zeroed at 50 yards, if memory is correct (I had to calculate due to 100 yd tgt)

I especially like the fact that I don't have to worry about dumping the muzzle towards the ground between shots just to achieve consistent velocity; and after hearing and reading dissenting opinions about the advisability of using fillers such as dacron and wads, I have decided that such things are definitely not for me. Why even risk having rings in the bore of a nice lever action rifle?

My preliminary testing showed an acceptable group, but I was firing at a 100 yard range and did not have time to compare it with other loads; I was testing several firearms at the time. I would suggest that interested readers try it for themselves. It's a pussycat to shoot, of course; and It is certainly a safe load!! You can load a lot of ammunition with only 9-10 grains of this shotgun powder.
Bob A
Levergunner 1.0
Posts: 89
Joined: Fri Sep 07, 2007 3:16 pm
Location: Northern California

Re: 30-30 Light Load Field Test Results

Post by Bob A »

[quote="JohndeFresno"]
My load:
30-30 Winchester Marlin 336 Centennial 20 in. barrel
9.4 gr. Alliant Red Dot (Using 1.3 cc Lee Dipper)
No wad or filler needed - powder is not sensitive to position of firearm, per C. E. Harris
Winchester Super-X brass, CCI 200 Lg Rifle primers
173 gr. Montana Bullet Works FN Gas Checked, Lubed,

John,
I have not tried the Lyman 311041 from Montana Bullet Works because they only offer sizing to 308 or 309.
I find my 336 prefers .310 or .311. My bore slugs to .309.
I have found very few commercial casters offer .311 and those that do "offer" .311 never ship
(like Beartooth Bullets and Penn Bullets)
What size are you using?
I will be very interested in your range results because I have been working on the same goal but using
SR4759 powder. Promising results so far using 14.5 gr with the 311041 sized to .311.
50 yd groups under 2" consistenly and lately coming down to sub 1.5" as I work with COL to get closer to the lands

Please let us know how you do with "THE LOAD"

Bob A

Bob A
JohndeFresno
Advanced Levergunner
Posts: 4559
Joined: Fri Sep 07, 2007 1:52 pm

Re: 30-30 Light Load Field Test Results

Post by JohndeFresno »

Bob A wrote: John,
I have not tried the Lyman 311041 from Montana Bullet Works because they only offer sizing to 308 or 309.
I find my 336 prefers .310 or .311. My bore slugs to .309.
I have found very few commercial casters offer .311 and those that do "offer" .311 never ship
(like Beartooth Bullets and Penn Bullets)
What size are you using?
I will be very interested in your range results because I have been working on the same goal but using
SR4759 powder. Promising results so far using 14.5 gr with the 311041 sized to .311.
50 yd groups under 2" consistenly and lately coming down to sub 1.5" as I work with COL to get closer to the lands

Please let us know how you do with "THE LOAD"

Bob A
Bob, I consulted with Dave and Marcie at
Montana Bullet Works
7730 Hesper Road
Billings, MT 59106
406-655-8163

Dave told me that, given what I was trying to do with the Marlin 336, he believed that I should definitely use the .309 - which is what he shipped to me. So far, I am very happy with this hard cast bullet; but more testing is indeed in order. Like other good family owned companies, Dave and Marcie thanked me for the order and stated in an e-mail that they would do everything possible to accommodate my needs. You might give them a call to see if they can size up for you.

As you pointed out (and as I neglected to do so), this is merely a well cast Lyman 311041, my chosen favorite all-use projectile for the thutty-thutty; so if they cannot size it properly, there are other good quality loaders, too. For the reason you noted, since some local reloader friends have had a similar problem (with Beartooth in particular, and others) in getting a timely response to their order, I always contact the company by e-mail AND phone before placing an order, to see when they will indeed put the order together.

Dave, at Montana (for instance) apologized for his schedule, and told me that he can't get the order out for a couple of days, but that he would get to work right away. That wasn't from any pressured requests, just good ol' Montana courtesy. The order still came back quicker than with the large retail outlets, and I received what appears to be high quality merchandise at a fair price. I have similar stories for all of the suppliers mentioned below.

I have had excellent response, service and product (cast bullets of various calibers) from:
Magnus Bullets (makes dead-on cast bullets for my .44 Mag target rounds)
Montana Bullet Works
Oregon Trail / LaserCast and TrueShot
LTD Custom (not reloading for the moment, per their website)
Mt. Baldy
Midway (I think that their search engine is the best in the business)

I have heard great things from some reloader friends in my part of the country regarding Cast Performance, so I will try to find a niche for them, since they are now sponsoring this, my favorite gun site. They sent me some good looking samples a while back, so I owe them some business, anyway. They are another company that I would go to for the round in question.

They have all, at one time or another, given me courteous, prompt and accurate advice on how to select and use their products. There are others, of course, and many I have not tried, because I am very satisfied with the above. In fact, there is just something about true shooting/loading enthusiasts that reveals most of them to be high caliber people (pun intended, I guess).
Nath
Advanced Levergunner
Posts: 8660
Joined: Sat Sep 08, 2007 1:41 pm
Location: England

Re: 30-30 Light Load Field Test Results

Post by Nath »

In the past I have used 150grn hard cast Gchecked and blue dot. The bullets in question would not of been an ideal shape for small deer but a good flat'n and I feel sure would be ok on small deer.

I use to use a 32 pistol 89grn for squirl pushed through a 308 Lee sizing die and a pinch of W231, it wasn't much good really! I remember shooting a fox that walked down this path towards me and I "popped" one in him at 5yds facing me, he legged it and I never found him. Did not have Tia then!

Nath.
Psalm ch8.

Because I wish I could!
User avatar
Old Savage
Posting leader...
Posts: 16793
Joined: Mon Sep 03, 2007 3:43 pm
Location: Southern California

Re: 30-30 Light Load Field Test Results

Post by Old Savage »

I would think 300 fps more would cause more erratic bullet performance. 130s at least I would think.
In the High Desert of Southern Calif. ..."on the cutting edge of going back in time"...

Image
John in MS
Levergunner 2.0
Posts: 431
Joined: Sun Apr 01, 2007 7:56 pm

Re: 30-30 Light Load Field Test Results

Post by John in MS »

+1 for Old Savage's idea -- I think going to a better bullet for actual hunting (plus reasonable velocity for expansion) would probably give much more reliable and satisfactory results than increasing speed on the Remington "carbine" bullet.

You could still use the 110's for training and Speer 130's for hunting. A little careful assessment of zero
differences between the 2 might reveal little problem switching between loads for within 100 yards.

To me, an essential part of a good hunting experience for a young person (or any person, really) is
that the ammunition perform reliably and humanely, and sometimes good bullets just cost a bit more.

Thanks again for the very helpful report (as always!) :)

Hope this helps,
John
"Pistols do not win wars, but they save the lives of the men who do. The noble 1911 is a mechanical marvel, whose ruggedness, dependability & ferocious power have comforted four issues of GIs and which, unlike any other instrument you can name, is as much superior to its rivals today as it was in 1917."
-Col. Jeff Cooper, 1968
User avatar
Old Ironsights
Posting leader...
Posts: 15084
Joined: Mon Apr 02, 2007 9:27 am
Location: Waiting for the Collapse
Contact:

Re: 30-30 Light Load Field Test Results

Post by Old Ironsights »

How about shooting for .357 OEM ballistics? We know that a good 158-180gr bullet at 1500-1800 is decent for deer and has almost no recoil - especially out of a 94 sized gun...

That 110 just seems awfully light & shallow...
C2N14... because life is not energetic enough.
מנא, מנא, תקל, ופרסין Daniel 5:25-28... Got 7.62?
Not Depressed enough yet? Go read National Geographic, July 1976
Gott und Gewehr mit uns!
JohndeFresno
Advanced Levergunner
Posts: 4559
Joined: Fri Sep 07, 2007 1:52 pm

Re: 30-30 Light Load Field Test Results

Post by JohndeFresno »

JohndeFresno wrote:I'm currently experimenting with a variation of THE LOAD as crafted by the great C. E. Harris (13 gr. Red Dot for several .30 caliber or larger rifle cartridges, providing they have the case capacity)....

My load:
30-30 Winchester Marlin 336 Centennial 20 in. barrel
9.4 gr. Alliant Red Dot (Using 1.3 cc Lee Dipper)
No wad or filler needed - powder is not sensitive to position of firearm, per C. E. Harris
Winchester Super-X brass, CCI 200 Lg Rifle primers
173 gr. Montana Bullet Works FN Gas Checked, Lubed,
Brinnell Hardness 22 per company
COAL (Cartridge Overall Length) 2.510 inches
Est. velocity (not yet clocked) 1,430 fps / Calculated ME 786 ft. lbs.
Computed Taylor KO value: 10.9 (for those who like that info)
My use is for target practice, however, at adjusted dope for the lighter load
Zeroed at 50 yards, if memory is correct (I had to calculate due to 100 yd tgt).
UPDATE from 7-2-2010
This month saw the first time in ages that I could spend a full day at the range. I brought a chronograph but there was too much activity at the stations for its use to be practical, so I just tested the loads without clocking them.

At 50 yards, as expected, I zeroed close to the bullseye with my scope dialed in for 100 yards on a more traditional load (Remington factory bullet of same weight). Dave Jennings sized this Montana BW boolit to .309.

I should have brought the target home or snapped it with my digital camera; but there will now be more range days. The groups appeared to be less than a half inch at 50 yards, discounting two flyers which I felt when firing. A few rounds were touching. I fired several firearms and sighted them in, so I will need to give better details the next day I take the .30-30 up there for just that caliber.

I will be testing this load further, to see exactly how tight I can group and 100 and 50 yards - good enough for some inexpensive plinking. My goal was reached with this load and bullet. There are some good casters out there, and it appears that the folks at Montana Bullet Works are among them. That's what I'll stick with for Red Dot. It looks like I've found a fairly cheap practice load!
User avatar
J Miller
Member Emeritus
Posts: 14890
Joined: Sat Mar 31, 2007 7:46 pm
Location: Not in IL no more ... :)

Re: 30-30 Light Load Field Test Results

Post by J Miller »

When I started teaching my 10 and 14 yo step sons to shoot I let them try my 30-30s with standard 150gr ammo. I said if that is too much for you, I'll load some lighter loads. Both of them went for the standard loads. Neither had any trouble with them at all. Neither does my 5'5" wife.
In short order my 10 yo gravitated to my No4Mk1 with ball ammo and never looked back.
With proper instructions I don't think youngsters are as recoil sensitive as some think they are.

I'm not sure where this lighter bullet, lighter recoil, lighter power for youngsters idea came from but it don't hold water for me.

JMHO based on my experiences.

Joe
***Be sneaky, get closer, bust the cap on him when you can put the ball where it counts ;) .***
20cows
Advanced Levergunner
Posts: 2278
Joined: Tue Apr 03, 2007 9:55 pm
Location: East West Texas

Re: 30-30 Light Load Field Test Results

Post by 20cows »

My lad was very recoil sensitive. It was load it down or he wouldn't shoot.

I loaded it down.
JohndeFresno
Advanced Levergunner
Posts: 4559
Joined: Fri Sep 07, 2007 1:52 pm

Re: 30-30 Light Load Field Test Results

Post by JohndeFresno »

Joe,

I'm interested in the lighter load for only one reason, split five ways:
1) I have a good supply of Red Dot;
2) It was CHEAP;
3) Light loads are CHEAP;
4) Shooting locally is CHEAP to shoot (free, little gas used);
5) Since I don't yet roll my own projectiles, these cast bullets are pretty reasonable - almost CHEAP.

But locally I only plink at about 50 yards at a vineyard or farmland, given the areas with a backstop. The range is a 45 minute drive each way and charges a fee.
Rusty
Advanced Levergunner
Posts: 9528
Joined: Mon Sep 03, 2007 6:37 pm
Location: Central Fla

Re: 30-30 Light Load Field Test Results

Post by Rusty »

Increasing the velocity by 300 FPS to increase penetration??

Isn't that contrary to what John Linebaugh teaches in his seminars?

Just wonderin...
If you're gonna be stupid ya gotta be tough-
Isiah 55:8&9

It's easier to fool people than it is to convince them they have been fooled.
NonPCnraRN
Levergunner 2.0
Posts: 349
Joined: Thu Sep 13, 2007 5:28 pm
Location: Stockton, CA.

Re: 30-30 Light Load Field Test Results

Post by NonPCnraRN »

You could try the Sierra 125 gr FN. Sam Fadala in his book, Winchester's 30-30, Model 94, lists a load on page p.50, using the Sierra 125 gr FN and 38.0 gr of H-335 for 2709 fps mv out of a 26" barrel. For a 20 inch barrel he said to deduct about 100-125 fps. That comes to 2584 to 2609 fps for the 20 inch barrel. There is also a 125 gr FN HP that should provide more expansion if desired. Another more expensive alternative would be the Barnes DPX 30 cal 100 gr M-1 carbine bullet. It would definately penetrate better than the Remington 30 carbine bullet.
Glenn
Levergunner 2.0
Posts: 157
Joined: Tue Dec 11, 2007 10:52 pm
Location: Colo.
Contact:

Re: 30-30 Light Load Field Test Results

Post by Glenn »

John,
I have a Uniflow too, and had some problem with light and over charges early on. This happens because the powder bridges (jams up) in the drop tube. The cure is to mount the handle so it is pointing down when the powder is dumping. Then when you dump the powder, move the handle to the stop normally, then give it two sharp taps against the stop. This will break any powder loose that bridges, and settle the powder in the hopper, ready for the next charge. Try it, you'll like it. :)
Glenn

"Charging problems with Red Dot shotgun powder: As an aside, my RCBS Uniflow Powder Measure cannot handle the fine flaked powder. It works its way around the charging cylinder (I guess it's called) and then comes out as no charge or an overcharge after a few good throws. "
JohndeFresno
Advanced Levergunner
Posts: 4559
Joined: Fri Sep 07, 2007 1:52 pm

Re: 30-30 Light Load Field Test Results

Post by JohndeFresno »

Glenn wrote:John,
I have a Uniflow too...The cure is to mount the handle so it is pointing down when the powder is dumping. Then when you dump the powder, move the handle to the stop normally, then give it two sharp taps against the stop..."
Thanks, Glenn. I do the three sharp rap thing, but at the BEGINNING of each cycle, against the hopper. I never thought of rapping the handle on the downstroke. I'll try it.
m.wun
Levergunner 3.0
Posts: 543
Joined: Wed Feb 27, 2008 5:34 pm
Location: S.Cal

Re: 30-30 Light Load Field Test Results

Post by m.wun »

maybe the rifle should be a 357 instead of the 30-30.I feel my hot loaded 357 has alot
less recoil than any 30-30 loads of mine.158gr at 1600-1800(slightly over factory)would
have better power with little recoil.Only down side I see is trajectory.
What in the wild world of sports is going on here
Post Reply