Project at the house
Forum rules
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
- Scott Tschirhart
- Advanced Levergunner
- Posts: 5039
- Joined: Fri Oct 16, 2020 2:56 pm
- Location: San Antonio, Texas
Project at the house
It gets awfully hot here in the summer and the garage even hotter. So I built a small garden shed in the back yard and I’m framing out part of it for my air conditioned loading room.
You do not have the required permissions to view the files attached to this post.
- Griff
- Posting leader...
- Posts: 21164
- Joined: Sat Mar 31, 2007 4:56 pm
- Location: OH MY GAWD they installed a STOP light!!!
Re: Project at the house

Griff,
SASS/CMSA #93
NRA Patron
GUSA #93
There is a fine line between hobby & obsession!
AND... I'm over it!!
No I ain't ready, but let's do it anyway!
SASS/CMSA #93
NRA Patron
GUSA #93
There is a fine line between hobby & obsession!
AND... I'm over it!!
No I ain't ready, but let's do it anyway!
Re: Project at the house
.
Nice...!
Our problem (in Indiana) is that the humidity is so terrible - in the winter any exposed metal gets condensed moisture unless the metal is hotter than the air, and in the summer, even though the metal is warm, the humidity is so high everything rusts.
Really good 'climate-control' may be the answer here, but gets so costly. So..........anything that can't tolerate moisture must stay in the house. (On the other hand, that's more convenient for me...!)
Nice...!
Our problem (in Indiana) is that the humidity is so terrible - in the winter any exposed metal gets condensed moisture unless the metal is hotter than the air, and in the summer, even though the metal is warm, the humidity is so high everything rusts.
Really good 'climate-control' may be the answer here, but gets so costly. So..........anything that can't tolerate moisture must stay in the house. (On the other hand, that's more convenient for me...!)
It's 2025 - "Cutesy Time is OVER....!" [Dan Bongino]
Re: Project at the house
Nice Scott ... I had a reloading building about like that in Oracle, AZ. Had a little stove in it for winter time.
- Scott Tschirhart
- Advanced Levergunner
- Posts: 5039
- Joined: Fri Oct 16, 2020 2:56 pm
- Location: San Antonio, Texas
Re: Project at the house
I remember you mentioning that Jim.
- Scott Tschirhart
- Advanced Levergunner
- Posts: 5039
- Joined: Fri Oct 16, 2020 2:56 pm
- Location: San Antonio, Texas
Re: Project at the house
Electrician will come out this week and after that I’ll spray on some closed cell foam insulation. Thin I’ll panel it.
- GunnyMack
- Advanced Levergunner
- Posts: 10980
- Joined: Mon Sep 19, 2016 7:57 am
- Location: Not where I want to be!
Re: Project at the house
Nice Scott! Think about peg board, the you'll have the ability to hang stuff on the walls.
The a/c unit in my shop kicked the bucket last summer, I need to replace it...
The a/c unit in my shop kicked the bucket last summer, I need to replace it...
BROWN LABS MATTER !!
- Scott Tschirhart
- Advanced Levergunner
- Posts: 5039
- Joined: Fri Oct 16, 2020 2:56 pm
- Location: San Antonio, Texas
Re: Project at the house
I absolutely love this. I also built a metal cover over the back patio.
This morning I’m enjoying coffee and rain with a very muddy dog.
This morning I’m enjoying coffee and rain with a very muddy dog.
You do not have the required permissions to view the files attached to this post.
- Steve in MO
- Levergunner 2.0
- Posts: 145
- Joined: Sun Aug 15, 2021 3:54 pm
- Location: SW MO
Re: Project at the house
Nice! I need something like that here.
"When the shooting stops, and the dead are buried, and the politicians take over; it all adds up to one thing: a lost cause."
Re: Project at the house
Not long after our son and his wife moved into their house near Ft Worth, my wife and I drove down and I helped him build a reloading area. He has a 30 x 50 ft steel building next to his house so we built a workbench that went about 25' across the back, made a right angle turn, then went another 10' along another wall. It turned out really well. He put an A/C unit in and put 30' of LED lights over the workspace. He covered the walls with masonite and pegboard. He's a lot neater than I am; I would have probably covered every horizontal surface with my stuff but he has kept it tidy.
When my wife and I built our present house in 1996, we built a 2 car garage for my toys facing north and a 2 car garage for her cars facing west. There's a room between the two measuring about 12 x 15' that's my loading room. It's my man-cave, my sanctuary and I hang out there a lot. When we lived in town 30 years ago I built a cinder block loading room in the back yard measuring about 12 x 12' and it really was a nice place. I put in a range hood vented out the back wall which allowed me to cast bullets inside. I do miss that but I don't want to do that with this house. I'll just continue casting in the open garage door.You do not have the required permissions to view the files attached to this post.
-
- Advanced Levergunner
- Posts: 9861
- Joined: Sun Jun 29, 2008 10:05 am
- Location: The Land of Enchantment
Re: Project at the house
Those are some seriously nice "guy spaces," guys! 

- Scott Tschirhart
- Advanced Levergunner
- Posts: 5039
- Joined: Fri Oct 16, 2020 2:56 pm
- Location: San Antonio, Texas
Re: Project at the house
My father-in-law asked my wife about when I planned to move out there.
Walt, I appreciate you sharing those photographs. That’s kind of what I’m looking to do. No clutter and space for what I really want.
Walt, I appreciate you sharing those photographs. That’s kind of what I’m looking to do. No clutter and space for what I really want.
Re: Project at the house
Scott, I normally spend the last few hours of my day in my workshop. There's no TV, really no noise at all. There's an old worn out recliner that fits me perfectly and shelves of books. When I'm not reloading, working on or cleaning guns, I'm reading old shooting classics or outdoor adventure books. It's my sanctuary. I admit there's some clutter but I must like it.
You do not have the required permissions to view the files attached to this post.
- Scott Tschirhart
- Advanced Levergunner
- Posts: 5039
- Joined: Fri Oct 16, 2020 2:56 pm
- Location: San Antonio, Texas
Re: Project at the house
I bought a steel door and frame for the interior door so I can put a deadbolt on that room.
Electricians are coming this morning.
Electricians are coming this morning.
Re: Project at the house
Perfect! I don't have a steel door but I did have the builders put in a solid core door and strengthened latch plates with long screws that go into the studs. Crime in this area is virtually non-existant and the house has security cameras and a burglar alarm system. I'm comfortable with it.
- Scott Tschirhart
- Advanced Levergunner
- Posts: 5039
- Joined: Fri Oct 16, 2020 2:56 pm
- Location: San Antonio, Texas
Re: Project at the house
The building is wired.
You do not have the required permissions to view the files attached to this post.
- Paladin
- Advanced Levergunner
- Posts: 2034
- Joined: Mon Jan 21, 2008 9:55 am
- Location: Not Working (much)
Re: Project at the house
We did the one-inch spray foam in my wife's She Shed. It is amazing how well it works. You will be happy with it. (except the cost)
You do not have the required permissions to view the files attached to this post.
It is not the critic who counts
- Ysabel Kid
- Moderator
- Posts: 28532
- Joined: Mon Sep 17, 2007 7:10 pm
- Location: South Carolina, USA
- Contact:
Re: Project at the house
Very nice!
I may need to do that as well if we move and I lose my basement.

- 2ndovc
- Advanced Levergunner
- Posts: 9571
- Joined: Fri Sep 07, 2007 11:59 am
- Location: OH, South Shore of Lake Erie
Re: Project at the house
That's the problem I have. My basement is on the damp side with a 5' ceiling. I feel like the Hunchback of Notre Dame.Ysabel Kid wrote: ↑Sat Apr 26, 2025 9:58 am Very nice!I may need to do that as well if we move and I lose my basement.

I've set up some shelves in the barn for my ammo cans and have a spare room on the second floor to build a new bench for reloading gear with plenty of room for some shelves to store components. Need to get on it, but have other projects to finish first.
Scott,
Your shed/ barn is looking good and very nicely done!
jb

jasonB " Another Dirty Yankee"
" Tomorrow the sun will rise. Who knows what the tide could bring?"
" Tomorrow the sun will rise. Who knows what the tide could bring?"
- Scott Tschirhart
- Advanced Levergunner
- Posts: 5039
- Joined: Fri Oct 16, 2020 2:56 pm
- Location: San Antonio, Texas
Re: Project at the house
Thank you. My wife has a craft room in the house, but she crafts everywhere. There’s a method to my madness. She would feel too confined in my little space.2ndovc wrote: ↑Sat Apr 26, 2025 2:05 pmThat's the problem I have. My basement is on the damp side with a 5' ceiling. I feel like the Hunchback of Notre Dame.Ysabel Kid wrote: ↑Sat Apr 26, 2025 9:58 am Very nice!I may need to do that as well if we move and I lose my basement.
![]()
I've set up some shelves in the barn for my ammo cans and have a spare room on the second floor to build a new bench for reloading gear with plenty of room for some shelves to store components. Need to get on it, but have other projects to finish first.
Scott,
Your shed/ barn is looking good and very nicely done!
jb![]()
-
- Senior Levergunner
- Posts: 1590
- Joined: Sat Jan 01, 2011 2:42 am
- Location: mechanicsville, md.
Re: Project at the house
make sure u insulate, they awful hot in summer and cold in winterScott Tschirhart wrote: ↑Sat Apr 19, 2025 1:34 pm It gets awfully hot here in the summer and the garage even hotter. So I built a small garden shed in the back yard and I’m framing out part of it for my air conditioned loading room.
Rossi 92 .357 lever , and a cz pcr 9mm
Henry .22 lever, Remington speedmaster 552 .22 lr
Marlin Glenfield .22 boltaction
gforce 12ga semi
Taylor's Tactical 1911 A1 FS in .45acp
ruger vaquero, 357 magnum
Marlin 336W .30.30
beeman sportsman rs2 dual caliber pellet rifle
henry .22 magnum pumpaction/octagon barrel
stag 5.56 m4 with reddot
Henry .22 lever, Remington speedmaster 552 .22 lr
Marlin Glenfield .22 boltaction
gforce 12ga semi
Taylor's Tactical 1911 A1 FS in .45acp
ruger vaquero, 357 magnum
Marlin 336W .30.30
beeman sportsman rs2 dual caliber pellet rifle
henry .22 magnum pumpaction/octagon barrel
stag 5.56 m4 with reddot
- Scott Tschirhart
- Advanced Levergunner
- Posts: 5039
- Joined: Fri Oct 16, 2020 2:56 pm
- Location: San Antonio, Texas