Paco Kelly's Leverguns.com

Marvin S

marlinman93 wrote:You probably got one for .25-20 Singleshot, so it wont accept .25-20 WCF.

Suspect you may be right, I'll check the case measurements against the 25-20 SS.

Marvin S

I recently bought one in 25-20 and would like to know if anyone has or does use one. Mine had some light rust in the two bores which I honed out so they are clean now. The problem I have is that a sized round will not enter either cavity, I assume the cartridge should fully enter each one especially...

Marvin S

With all the controversy on Winchester numbers and dates how accurate is the easy to use one on, http://oldguns.net/sn_php/winmods.htm

Marvin S

Iron sight's and cast bullet from a pre 64 Mod 94. Pardon the substandard cell phone photo.

Marvin S

Okay I'll bite, I have some old Remington and Marlin pumps.

Marvin S

There is really not much in the way of 32 rimfire to be had that is any good to shoot right now as most if not all the lube is gone from it. No one is making any neither, I did send another E-mail to CCI the other day asking them to make some. I hear it already not to hold my breath but at least I g...

Marvin S

Pleasing to the eye for sure.

Marvin S

Also check out Accuratemolds.com he can custom tailor the mold to suit you.

Marvin S

Well the weather is poor here today and I have my new to me 38 WCF so I go and load up an as cast SAECO 401 which measures .403. I put a bit of Wonder lube on the bullet and a patch greased with the same stuff down the bore. The squib was loaded with a large rifle primer and 1.2 gr of unique. I then...

Marvin S

I assume your sprue is cut clean and there is a nice flat base? Also be sure to hold pressure down on the bullet when turning the wrench to apply more lube.

Marvin S

Hey I just got a 38 WCF and could use em.

Marvin S

Best wishes from a fellow Kansan.

Marvin S

That will be very nice, I have one of the pre safety SRC models and they do shoot super good. We all want to see more pic's when you get to it.

Marvin S

I also have a Mod 64 in 32WS but have not shot it yet and it may do well with the RD bullet but my 32-40s do not chamber it along with the RCBS and LEE 32-8mm designs. The plain base SAECO and Lyman will chamber but both lack a gas check, crimp groove or are tapered. This problem is not only with my...

Marvin S

The under carriage can get super expensive as well as the other parts. I had a 1953 Cat D-4 with the twin winches on the back and a loader. My electric starter motor completely burned up and a new one was $800.00. Have someone look at it that knows what they are looking at. Worn rails, pins, sprocke...

Marvin S

You may be good with the Ranch Dog for your Marlin as they are designed for them. I use the Ranch Dog in my 30-30 Winchester with good luck but have problems I mentioned in my 32 cals.

Marvin S

If anyone is interested I have worked with Tom at Accurate Mold to design a 170gr gas check bullet that will work in original Winchester rifles chambered in 32-40 cal. If your like me and have had terrible luck with everything else you might look at this one. The main problems I have had is that all...

Marvin S

My preference are the S&W white outline rear and partridge front, especially the gold dot insert front like on my Mod 27-2.

Marvin S

Hope to have it by this weekend, I will post more when it shows up.

Marvin S

Thanks twobit I will send you the info on my other 92 when I can get some good pics. I do know that Model 94s will show the color difference between the receivers and barrels. My other original 92 has this also so I was taking a shot that this one may be okay. Usually when you ask a seller about ref...

Marvin S

Have some new brass and lots of lead but no mold or dies yet. Don't know if I should get the Lyman or RCBS mold.

Marvin S

We will likely match that wind chill here in Kansas tonight and tomorrow, one big storm. Work has been shut down for two days counting tomorrow, I have never seen that in 27 years.

Marvin S

http://www.gunbroker.com/Auction/ViewIt ... =213499055
Give me you good bad and other wise opinions on this rifle. I have not received it yet.

Marvin S

Never paid attention to where Barbasol was made but that is all I have bought for years as it's priced right and works well. Good to know.

Marvin S

So what is it sizing the neck to and what dia of bullets are you using? The 32-20 is easy to load as long and the right dimensions are met. Figure this out and you wont cuss it no more, it's a great little round. May have to get a different dia expander, the Rem or Win cases are fine just a little d...

Marvin S

Would the 92s have MNS or similar markings under the forearm like the Mod 94s?

Marvin S

I have been shooting 32-40s for a few years and just picked up a Mod 64 in 32 WS, now to get some cases and dies.

Marvin S

I have one in 32-40 and it is an outstanding shooter, you should like it.

Marvin S

Here's my Maytag. 1937 twin cylinder.[img] Oh well dont look like it's going.

Marvin S

Neat guns, I had one for years and sold it. As you may know watch your fingers around the bolt when it's open.

Marvin S

I know how you feel as I have been broken into several times and have lost large amounts of stuff including guns. The police don't really care as it's not a money maker for the system to catch them and put em in jail. Safes have been the best money spent for me. I just recently installed a camera sy...

Marvin S

My Mom raised German shephards all while raising four boys. She sold them to the police and military and some individuals. Out of 100s of them we did have one crazy dog I had to shoot. It had blue tongue when it was small, maybe made it crazy. But this breed is my dog of choice.

Marvin S

Well the yellow power unit is a MD-3, always good for blowing fire out the exhaust on startup.

Marvin S

Always feels good when you do it with a fine old rifle. I get odd looks from folks when they see what I hunt with. Like they never seen anything like it. Yea I got a Browning A-Bolt in 30-06 but it just aint the same. Next year Ill use my 32-40.

Marvin S

Okay, for today if we only get to pick one each Ill go for a S&W 27-2 6" 357 and for the long gun it will be a 94 Win in 32-40 1923mfg.

Marvin S

I took a couple with my cell phone only to find out it is not able to download them. only email.

Marvin S

All outstanding shows. I have them all and watch em every couple years or so.

Marvin S

What caliber is it?

Marvin S

Got a decent little buck first thing opening morning with a Pre 64 Mod94 30-30 that I bought from Dave a couple months ago. Bullet was a home cast 165 Ranch Dog. One shot and it went about 30 yards and fell over dead. Shot was only about 25yards in very thick cover. I think I had about two heart att...

Marvin S

Kind of a 32 freak I guess, 32SW 32Mag 32-20 and 32-40.

Marvin S

You may keep an eye out for the out of production CVA squirrel rifle. It is 32cal and is quite well made and has deep cut rifling.

Marvin S

Might keep a look out for the law, what a steal.

Marvin S

Can't say mine has changed just maybe expanded. Yes I have some that have not been shot in years (10+) but are good and will not be leaving soon. This is mainly the newer type stuff like M1A, FAL, 1911s in 10mm and 45acp. The older stuff in the so called obsolete cals with cast bullets are just too ...

Marvin S

I view guns in different categories. There are ones that are tools, they are mostly plastic types with either frames or stocks made from it. They are kind of like a black and decker drill.I have exactly one of these types, a Beretta A390 12ga that is my water fowl gun. Then there are your average gu...

Marvin S

For country it's. Merle Haggard J Cash Travis Tritt Rock would be. J Hendrix Black Sabbath Metallica Uriah Heep Bad Co God Smack Volbeat System of a down Robin Trower Neil Young & Crazy Horse Iron Maiden The Animals CCR Okay im worn out. My brother plays in a blue grass band so some of that's go...

Marvin S

I just loaded some up with this bullet for my pre64 94 but have not shot them yet. But everything looks real good dimention wise and and they cycle perfect. I ran them through a Lyman 4500 without using the check seater as the shank was not oversize and it was not needed. The tumble lube grooves fil...

Marvin S

Do check out Ranch Dog Molds. He is back in operation and looks to make molds suitable for lever action rifles. I am going to get a 323-170 from him when they come in for my 32-40s. The problem with some or most is the nose area is too large in diameter and wants to engrave the rifleing and make the...

Marvin S

I think I have a file with maybe 100 loads for the 25-20 if you need it.

Marvin S

Ill throw in a Dan Wesson 15VH in 357 just for the barrel changes I can make. Other wise maybe a 4" 586 or 686.

Marvin S

I have the same 38-55 and installed a receiver sight ( it's factory drilled and tapped) and it shoots cast very well. I got mine used in nice shape about 8 years ago for about $325.00. It was a good deal I could not pass on.

Search found 768 matches