How exactly does this work?
Forum rules
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
- Scott Tschirhart
- Advanced Levergunner
- Posts: 4056
- Joined: Fri Oct 16, 2020 2:56 pm
- Location: San Antonio, Texas
How exactly does this work?
I've been playing with powders in my .44 Special revolvers and an 1873 Cimmarron carbine.
I love the old Skeeter load, 7.5 gr of Unique under a Keith bullet and those balistics (900-980 fps depending on barrel length) are more than enough to do anything I need to do with the cartridge.
However, I note that there are some powders now that get those velocity levels with much less pressure. For example, Brian Pearce reports that 8 gr of Power Pistol gets 980 fps but stays under 15,500 psi but 6.9 gr of Unique is maximum for this pressure.
In my mind, a bullet in a revolver is a piston and the more pressure, the more velocity, all things being equal. However, this does not appear to be the case.
Does anyone understand how one can get the velocity out of Power Pistol with the significantly reduced pressure?
I love the old Skeeter load, 7.5 gr of Unique under a Keith bullet and those balistics (900-980 fps depending on barrel length) are more than enough to do anything I need to do with the cartridge.
However, I note that there are some powders now that get those velocity levels with much less pressure. For example, Brian Pearce reports that 8 gr of Power Pistol gets 980 fps but stays under 15,500 psi but 6.9 gr of Unique is maximum for this pressure.
In my mind, a bullet in a revolver is a piston and the more pressure, the more velocity, all things being equal. However, this does not appear to be the case.
Does anyone understand how one can get the velocity out of Power Pistol with the significantly reduced pressure?
Re: How exactly does this work?
Deleted.
Last edited by Ray on Tue Jan 18, 2022 6:40 am, edited 2 times in total.
m.A.g.a. !
Re: How exactly does this work?
Mic would be the guy to call.
He has forgotten more than most folks ever learned.
Call when you have some time to listen for a while.
Take notes.
He has forgotten more than most folks ever learned.
Call when you have some time to listen for a while.
Take notes.
Re: How exactly does this work?
2400 has always been my go to.
If you're gonna be stupid ya gotta be tough-
Isiah 55:8&9
It's easier to fool people than it is to convince them they have been fooled.
Isiah 55:8&9
It's easier to fool people than it is to convince them they have been fooled.
- AJMD429
- Posting leader...
- Posts: 32245
- Joined: Sun Sep 09, 2007 10:03 am
- Location: Hoosierland
- Contact:
Re: How exactly does this work?
Just guessing, but I think if the rate of burn is just right get the bullet moving and keep accelerating you get the least pressure spikes. Think of three or four people trying to push an automobile if they all push pretty hard at the right pace they'll get the car moving and nobody has to push that hard but if they were to all run against the car really hard and slam into it at the same time trying to push it, there would be 'pressure spikes' maybe manifesting as somebody spraining a wrist or back.
Doctors for Sensible Gun Laws
"first do no harm" - gun control LAWS lead to far more deaths than 'easy access' ever could.
Want REAL change? . . . . . "Boortz/Nugent in 2012 . . . ! "
"first do no harm" - gun control LAWS lead to far more deaths than 'easy access' ever could.
Want REAL change? . . . . . "Boortz/Nugent in 2012 . . . ! "
Re: How exactly does this work?
I try and factor pressure into my loads too. Especially with older original guns.
Lots of voodoo there. I find it very interesting. It was the basis for my switch to W748 from IMR3031 in the 30-30. As close as it is dimensionally, the 32WS still gets IMR. Pressure is much lower. Many times I think it's changed drastically by the slightest change in the combination of bore diameter, twist rate, and obviously burn rate.
If I tend to overlook it, it is with Unique. It is such a universal powder that I use it as a baseline to evaluate many cartridge/bullet combinations.
Lots of voodoo there. I find it very interesting. It was the basis for my switch to W748 from IMR3031 in the 30-30. As close as it is dimensionally, the 32WS still gets IMR. Pressure is much lower. Many times I think it's changed drastically by the slightest change in the combination of bore diameter, twist rate, and obviously burn rate.
If I tend to overlook it, it is with Unique. It is such a universal powder that I use it as a baseline to evaluate many cartridge/bullet combinations.
"Oh bother", said Pooh, as he chambered another round.
Re: How exactly does this work?
Interesting analogy. That makes sense and was along the lines of what I was thinking, but I couldn't put it into words.AJMD429 wrote: ↑Wed Oct 13, 2021 4:47 am "Think of three or four people trying to push an automobile if they all push pretty hard at the right pace they'll get the car moving and nobody has to push that hard but if they were to all run against the car really hard and slam into it at the same time trying to push it, there would be 'pressure spikes' maybe manifesting as somebody spraining a wrist or back."
Old No7
"Freedom and the Second Amendment... One cannot exist without the other." © 2000 DTH
- marlinman93
- Advanced Levergunner
- Posts: 6494
- Joined: Sun Apr 01, 2007 3:40 pm
- Location: Oregon
Re: How exactly does this work?
Of course all powders have different burn rates, but even if they're side by side on the burn rate chart, they can still be very different. How the powders ramp up, or spike also affects what is maximum with one powder, yet just average with another.
Chamber pressures can vary immensely from powder to powder based solely on how fast they burn, and the way they spike up during the burn process.
Chamber pressures can vary immensely from powder to powder based solely on how fast they burn, and the way they spike up during the burn process.
Pre WWI Marlins and Singleshot rifles!
http://members.tripod.com/~OregonArmsCollectors/
http://members.tripod.com/~OregonArmsCollectors/
- Scott Tschirhart
- Advanced Levergunner
- Posts: 4056
- Joined: Fri Oct 16, 2020 2:56 pm
- Location: San Antonio, Texas
Re: How exactly does this work?
We got a long explanation from Mic, but I am still trying to decipher it. Fascinating though.
Re: How exactly does this work?
this was my guess. the time element.marlinman93 wrote: ↑Wed Oct 13, 2021 11:23 am Of course all powders have different burn rates, but even if they're side by side on the burn rate chart, they can still be very different. How the powders ramp up, or spike also affects what is maximum with one powder, yet just average with another.
Chamber pressures can vary immensely from powder to powder based solely on how fast they burn, and the way they spike up during the burn process.
I make powder choices based on the least amount of pressure necessary to get the results I want, I call it downloading, but it can be seen in the ballistic charts.
looking forward to a complete explanation. it would be very helpful to know more about it.
- AJMD429
- Posting leader...
- Posts: 32245
- Joined: Sun Sep 09, 2007 10:03 am
- Location: Hoosierland
- Contact:
Re: How exactly does this work?
.
Although in general I like to be as informed as possible about anything I do, sometimes thinking about reloading is so scary it makes me not want to do it...! So MANY unknowns and uncontrollable variables.
Although in general I like to be as informed as possible about anything I do, sometimes thinking about reloading is so scary it makes me not want to do it...! So MANY unknowns and uncontrollable variables.
Doctors for Sensible Gun Laws
"first do no harm" - gun control LAWS lead to far more deaths than 'easy access' ever could.
Want REAL change? . . . . . "Boortz/Nugent in 2012 . . . ! "
"first do no harm" - gun control LAWS lead to far more deaths than 'easy access' ever could.
Want REAL change? . . . . . "Boortz/Nugent in 2012 . . . ! "
- Scott Tschirhart
- Advanced Levergunner
- Posts: 4056
- Joined: Fri Oct 16, 2020 2:56 pm
- Location: San Antonio, Texas
Re: How exactly does this work?
Really? I've been loading since I was 14 years old and the only mishap I have ever experienced was popping a primer (which occasionally happened with the old Lee Loaders). It was disturbing to say the least!
- marlinman93
- Advanced Levergunner
- Posts: 6494
- Joined: Sun Apr 01, 2007 3:40 pm
- Location: Oregon
Re: How exactly does this work?
I run into the issue of unknowns so often with my obsolete cartridges, and smokeless powders, that it's become common place for me to try to figure out what I can use, and what is safe in numerous old cartridges. Powder burn rates, how they spike, or how gradual they get to max pressure are very important to know.
But also as important is the effect certain powders have in various size cases, and whether the case is a bottleneck, or a straight wall design. If I took load data for a straight wall .45-70, decided to use it for my .44-77 Sharps Bottleneck, I could quickly get into trouble. The same charge that isn't an issue in the .45-70 could be a big issue in the .44-77 BN case.
But also as important is the effect certain powders have in various size cases, and whether the case is a bottleneck, or a straight wall design. If I took load data for a straight wall .45-70, decided to use it for my .44-77 Sharps Bottleneck, I could quickly get into trouble. The same charge that isn't an issue in the .45-70 could be a big issue in the .44-77 BN case.
Pre WWI Marlins and Singleshot rifles!
http://members.tripod.com/~OregonArmsCollectors/
http://members.tripod.com/~OregonArmsCollectors/
-
- Advanced Levergunner
- Posts: 4145
- Joined: Fri Dec 21, 2007 11:34 am
- Location: north of Palacios about 1400 miles
Re: How exactly does this work?
Gonna sidetrack a little bit with small caliber rifle. My favorite 223 load is 11.5grs BluDot with 50gr SP. It averages 2750fps out if a 20" barrel. Also do 9.4grs BluDot with 34gr HP. Havent chronied this one but it very quiet out of rifle and very mild out of a 10" Contender.
30/30 Winchester: Not accurate enough fer varmints, barely adequate for small deer; BUT In a 10" to 14" barrelled pistol; is good for moose/elk to 200 yards; ground squirrels to 300 metres
250 Savage... its what the 223 wishes it could be...!
250 Savage... its what the 223 wishes it could be...!
- crs
- Advanced Levergunner
- Posts: 3154
- Joined: Thu Sep 06, 2007 10:32 am
- Location: Republic of Texas
- Contact:
Re: How exactly does this work?
If you measure the pressure of a load and then view or print the pressure curve, much of the mystery will go away. Pressure Trace II is one such tool for capturing, displaying, and analyzing the pressure data.
Most references to pressure are to the PEAK pressure of the load, and not the energy of the load.
Many, if not most smokeless powders have a sharp pressure peak that quickly drops off.
One powder and possible others burn in such a way that there is no sharp pressure peak and rapid fall off. That pressure curve has no sharp peak, but has a slower and smoother rise and fall, and more of an elliptical shape and more energy under the curve. That energy propels the bullet down the barrel and out to it's destination. If you have never seen such graphs, I may be able to post a couple as examples.
PS If all this is old hat to you, my apologies for wasting your time.
Most references to pressure are to the PEAK pressure of the load, and not the energy of the load.
Many, if not most smokeless powders have a sharp pressure peak that quickly drops off.
One powder and possible others burn in such a way that there is no sharp pressure peak and rapid fall off. That pressure curve has no sharp peak, but has a slower and smoother rise and fall, and more of an elliptical shape and more energy under the curve. That energy propels the bullet down the barrel and out to it's destination. If you have never seen such graphs, I may be able to post a couple as examples.
PS If all this is old hat to you, my apologies for wasting your time.
CRS, NRA Benefactor Member, TSRA, DRSS, DWWC, Whittington Center
Android Ballistics App at http://www.xplat.net/
Android Ballistics App at http://www.xplat.net/
- marlinman93
- Advanced Levergunner
- Posts: 6494
- Joined: Sun Apr 01, 2007 3:40 pm
- Location: Oregon
Re: How exactly does this work?
I've never owned a pressure tester. I use either old loading manuals from the early 1900's, or I call a friend who has Quickloads and ask him to run all the specifics through his program. I need to order Quickloads myself, as it not only takes in consideration case, powder, and bullet weight. But also takes into consideration barrel length, rifling twist rate, and other pertinent info to give a velocity, and chamber pressure.crs wrote: ↑Thu Oct 14, 2021 12:42 pm
Many, if not most smokeless powders have a sharp pressure peak that quickly drops off.
One powder and possible others burn in such a way that there is no sharp pressure peak and rapid fall off. That pressure curve has no sharp peak, but has a slower and smoother rise and fall, and more of an elliptical shape and more energy under the curve. That energy propels the bullet down the barrel and out to it's destination. If you have never seen such graphs, I may be able to post a couple as examples.
Pre WWI Marlins and Singleshot rifles!
http://members.tripod.com/~OregonArmsCollectors/
http://members.tripod.com/~OregonArmsCollectors/