Thinking of a custom rifle

Welcome to the Leverguns.Com Forum. This is a high-class place so act respectable. We discuss most anything here ... politely.

Moderators: AmBraCol, Hobie

Forum rules
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.

Please post political post in the new Politics forum.
Post Reply
Rusty
Advanced Levergunner
Posts: 9528
Joined: Mon Sep 03, 2007 6:37 pm
Location: Central Fla

Thinking of a custom rifle

Post by Rusty »

Since I have a birthday that is considered to be a major milestone by some that is right around the corner I'm considering ordering a custom rifle from the Marlin Custom shop. I'm thinking along the lines of an 1894c. The custom features would be a 20" barrel instead of the stock 18.5" barrel that would be threaded for a suppressor. I would also get extra fancy wood as available.
What other options would y'all consider for a milestone rifle?
If you're gonna be stupid ya gotta be tough-
Isiah 55:8&9

It's easier to fool people than it is to convince them they have been fooled.
1894c

Re: Thinking of a custom rifle

Post by 1894c »

receiver sights or tang sights...serial number with your initials...octagon barrel...just my thoughts... :)
User avatar
Blaine
Posting leader...
Posts: 30514
Joined: Mon Dec 17, 2007 2:22 pm
Location: Still Deciding

Re: Thinking of a custom rifle

Post by Blaine »

After you receive the rifle, consider the addition of a Wild West Happy Trigger.....
The Rotten Fruit Always Hits The Ground First

Proud Life Member Of:
NRA
Second Amendment Foundation
Citizens Committee For The Right To Keep And Bear Arms
DAV
Rusty
Advanced Levergunner
Posts: 9528
Joined: Mon Sep 03, 2007 6:37 pm
Location: Central Fla

Re: Thinking of a custom rifle

Post by Rusty »

Well, we're looking at 60+ year old eyes here so I'm thinking a scope with illuminated retractile will be in the picture before it's over. I'm not sure a peep will be in the initial set up... maybe as a back up.
If you're gonna be stupid ya gotta be tough-
Isiah 55:8&9

It's easier to fool people than it is to convince them they have been fooled.
User avatar
GunnyMack
Advanced Levergunner
Posts: 11716
Joined: Mon Sep 19, 2016 7:57 am
Location: Not where I want to be!

Re: Thinking of a custom rifle

Post by GunnyMack »

Rusty, look into the Trijicon scopes, they don't need batteries!
BROWN LABS MATTER !!
Rusty
Advanced Levergunner
Posts: 9528
Joined: Mon Sep 03, 2007 6:37 pm
Location: Central Fla

Re: Thinking of a custom rifle

Post by Rusty »

GunnyMack wrote:Rusty, look into the Trijicon scopes, they don't need batteries!

I have one on my 77/223... it's great glass for sure!
If you're gonna be stupid ya gotta be tough-
Isiah 55:8&9

It's easier to fool people than it is to convince them they have been fooled.
User avatar
AJMD429
Posting leader...
Posts: 34181
Joined: Sun Sep 09, 2007 10:03 am
Location: Hoosierland

Re: Thinking of a custom rifle

Post by AJMD429 »

I'd be inclined to stick with the shorter barrel if using a suppressor, since the suppressor will add another 6 inches or so, plus you should be able to get plenty of velocity from the shorter barrel, especially when you're shooting subsonics.

For that matter, if I were considering a 'special occasion' rifle, I'd be likely to 'SBR' it (as I understand it, the paperwork isn't difficult, and the cost not bad when considering it's a lifetime item), and then have the barrel shortened to 12" and threaded....
It's 2025 - "Cutesy Time is OVER....!" [Dan Bongino]
3leggedturtle
Advanced Levergunner
Posts: 4145
Joined: Fri Dec 21, 2007 11:34 am
Location: north of Palacios about 1400 miles

Re: Thinking of a custom rifle

Post by 3leggedturtle »

^^^^^ +1 on this..
30/30 Winchester: Not accurate enough fer varmints, barely adequate for small deer; BUT In a 10" to 14" barrelled pistol; is good for moose/elk to 200 yards; ground squirrels to 300 metres

250 Savage... its what the 223 wishes it could be...!
Pete44ru
Advanced Levergunner
Posts: 11242
Joined: Sun Sep 02, 2007 7:26 am

Re: Thinking of a custom rifle

Post by Pete44ru »

.

I'd make mine a blued/engraved version with the rare 2/3 M-1894 Sporter magazine & tapered octagon barrel.

Image

.
Sixgun
Posting leader...
Posts: 19271
Joined: Sun Sep 16, 2007 7:17 pm

Re: Thinking of a custom rifle

Post by Sixgun »

Rusty,
The guys above pretty much said it right and I agree to all, especially with the sighting equipment and a good trigger.

I'd like to add that while I don't know what caliber you are going to choose, so IF you choose a .44 mag or a 45 L.Colt I'd be damm sure I would NEVER accept the standard 1-38 twist. As a caster you know these things and I have yet to see any slow twist barrel deliver good accuracy with a full range of bullets and velocities. My old antiques from the 1800's will shoot almost everything with accuracy.

Bottom line........as a shooter, you will never be happy with a gun that only shoots "this load or that load". The twist rate would be a deal breaker for me.

You go ahead and please yourself with your milestone......see that 22 pound biggie thing on my signature line? It was a gift to myself on retirement. :D ----6
This is Boring & Mindless……Wasted Energy
User avatar
Old Savage
Posting leader...
Posts: 16962
Joined: Mon Sep 03, 2007 3:43 pm
Location: Southern California

Re: Thinking of a custom rifle

Post by Old Savage »

I had a 20" Cowboy .357 that went to TedH. It is nicely steady to shoot with the octagon barrel which is a high polish blue.
In the High Desert of Southern Calif. ..."on the cutting edge of going back in time"...

Image
jdad
Advanced Levergunner
Posts: 3446
Joined: Fri Sep 07, 2007 7:55 am
Location: Oregon

Re: Thinking of a custom rifle

Post by jdad »

Just a thought.....

Marlin (Remington) now has a custom shop producing guns out of Dakota Arms.

605-347-4686


$$$$
I know a whole lot about very little and nothing about a whole lot.
Booger Bill
Advanced Levergunner
Posts: 2268
Joined: Sun Feb 07, 2010 5:23 pm

Re: Thinking of a custom rifle

Post by Booger Bill »

Why would you want a suppressor on that type of a rifle?
User avatar
Paladin
Advanced Levergunner
Posts: 2251
Joined: Mon Jan 21, 2008 9:55 am
Location: Not Working (much)

Re: Thinking of a custom rifle

Post by Paladin »

GunnyMack wrote:Rusty, look into the Trijicon scopes, they don't need batteries!

Or the Vortex Spitfire series (1x or 3x) that have red, green, or no power required with a circle dot aiming system
It is not the critic who counts
User avatar
RIHMFIRE
Advanced Levergunner
Posts: 7798
Joined: Fri Sep 07, 2007 11:51 am
Location: Florida

Re: Thinking of a custom rifle

Post by RIHMFIRE »

This is a restored 40-65 Marlin 1895 manufactured in 1898.  This rifle has a 28” octagon barrel. My idea of a custom rifle! :wink:
Image
LETS GO SHOOT'N BOYS
Rusty
Advanced Levergunner
Posts: 9528
Joined: Mon Sep 03, 2007 6:37 pm
Location: Central Fla

Re: Thinking of a custom rifle

Post by Rusty »

I'very already got enough. 44s around. I'm thinking this one will be .357. I woul5go for a .32-20 or even a .327 Federal but I don't know if they would do the later 2.
If you're gonna be stupid ya gotta be tough-
Isiah 55:8&9

It's easier to fool people than it is to convince them they have been fooled.
Rusty
Advanced Levergunner
Posts: 9528
Joined: Mon Sep 03, 2007 6:37 pm
Location: Central Fla

Re: Thinking of a custom rifle

Post by Rusty »

Booger Bill wrote:Why would you want a suppressor on that type of a rifle?

Bill, I've been living in the same place for the last 37 years. When I got here I shot all the time. Now a lot of people have moved in around me and I'm not sure I want to advertise that I have guns and shoot. With a suppressor I could shoot all I wanted to without letting anybody else know I was shooting. From time to time something needs to be shot, I usually do that with a shotgun... one shot and done. Nobody pays much attention to it. Multiple rounds fired without a suppressor I'm sure would draw unwanted attention.
If you're gonna be stupid ya gotta be tough-
Isiah 55:8&9

It's easier to fool people than it is to convince them they have been fooled.
User avatar
AJMD429
Posting leader...
Posts: 34181
Joined: Sun Sep 09, 2007 10:03 am
Location: Hoosierland

Re: Thinking of a custom rifle

Post by AJMD429 »

Booger Bill wrote:Why would you want a suppressor on that type of a rifle?
I sure would...!

It is the perfect gun for suppressing because is compact and can shoot relatively large for caliber bullets at modest velocity and still have good impact. Plus with a suppressed gun it is much easier to get new shooters involved because shooting because the gun is so much less intimidating when it is quieter. Even with the suppressor off it is nice to have a birdcage flash hider on the muzzle of any gun because it helps protect the muzzle from debris if you are climbing or crawling through brush or that sort of thing.

Here's a couple videos on the topic:
And a good article:
Now if I want a historically-correct gun to go play John Wayne or Josey Wales with, I will grab my 1889 Marlin, or a 1886 big-bore, but if I want to show a grandkid how to shoot, I'll grab my integrally-suppressed Ruger 96 levergun. Same if it's dark and rainy out, and I'm just going out to check the livestock - the nice Winchester levergun stays safe and dry inside, and I sling the stainless 357 Mag levergun over my shoulder, with its attached flashlight, Burris Fastfire, and LaserMax laser - definitely not an 'authentic' levergun, but very practical, and if I had the spare change, it would have a 10" barrel and a suppressor.
It's 2025 - "Cutesy Time is OVER....!" [Dan Bongino]
Post Reply