Big Butt is finished
Forum rules
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
Big Butt is finished
Well here is big butt all done. I finally was able to get her done today. I proofed the barrel and regulated the sights early this afternoon. I put a fake copper wrist repair to cover the bark inclusion in the wrist. I was almost done with the finish work last week when I got an infection under my thumb nail where I shoved a broken drill bit through it. So Friday was spent going to the doctors, getting x-rays and filling a prescription for antibiotics. Should have had a rubber glove on my hand but its been so hot I tried to bypass it. Won't try that again. The rifle is really a pleasure to shoot. A .40 with round balls and 45 grains of fffg powder is easy on arms and ears. Even with the 44" barrel the rifle is right around seven pounds which makes it nice for carrying but a little light for off hand shooting. The groups I shot were not very impressive but I only had .395 rb's to try. I'm sure if I had some .390's it would have turned in some better groups. I also have a photo of what my rifles start out as.
Re: Big Butt is finished
Very nice!
Like your thoughts on caliber, and your execution is excellent!
Like your thoughts on caliber, and your execution is excellent!
Re: Big Butt is finished
That's absolutely awesome! I love it
- gamekeeper
- Spambot Zapper
- Posts: 17486
- Joined: Thu Sep 06, 2007 3:32 pm
- Location: Over the pond unfortunately.
Re: Big Butt is finished
Fantastic! That rifle is bringing history alive.....
Whatever you do always give 100%........... unless you are donating blood.
- ollogger
- Advanced Levergunner
- Posts: 2807
- Joined: Mon Jul 05, 2010 2:47 pm
- Location: Wheatland Wyoming
- Contact:
Re: Big Butt is finished
Truly a work of art!!
-
- Advanced Levergunner
- Posts: 4429
- Joined: Wed Sep 12, 2007 12:33 pm
- Location: Wyoming and Arizona
Re: Big Butt is finished
Really nice job.
- plowboy 45
- Senior Levergunner
- Posts: 1370
- Joined: Thu Dec 26, 2013 9:42 pm
- Location: PURVIS, MISSISSIPPI
Re: Big Butt is finished
Thats one heck of a good job
Re: Big Butt is finished
.
You've done well, Pilgrim ..................
.
You've done well, Pilgrim ..................
.
Re: Big Butt is finished
Thanks guys. I really need to get faster though or I'm going to have to get one of them real jobs.
Re: Big Butt is finished
Nicely done. Should make a great coon and rabbit buster.
Jeremy
GySgt USMC Ret
To err is human, To forgive is devine, Neither of which is Marine Corps policy
Semper Fidelis
GySgt USMC Ret
To err is human, To forgive is devine, Neither of which is Marine Corps policy
Semper Fidelis
-
- Advanced Levergunner
- Posts: 5493
- Joined: Mon Apr 02, 2007 9:23 pm
- Location: Batesville,Arkansas
Re: Big Butt is finished
You built a classic rifle, a very elegant piece. You say it is a little light for off hand, what does the barrel measure across the flats. I had my rifle made with a 36 inch 15/16 Douglas barrel back in 1968, it holds steady for me even though I'm a lot older now.
JerryB II Corinthians 3:17, Now the Lord is that Spirit: and where the Spirit of the Lord is, there is liberty.
JOSHUA 24:15
JOSHUA 24:15
Re: Big Butt is finished
Jerry the barrel is swamped so even though its 15/16" at the breech it tapers to .677" and flares back out at the muzzle to about 7/8". With this profile it really makes for a lite barrel. After owning a swamped barrel rifle I would never go back to a straight one. If I wanted a heavier gun for off hand shooting I would just go with a bigger diameter barrel. I'm not sure what the customer wanted this rifle for. It will make a great hunting rifle for sure though.
-
- Advanced Levergunner
- Posts: 6972
- Joined: Tue Apr 03, 2007 8:52 pm
- Location: Ridgefield WA. USA
Re: Big Butt is finished
Well done!!!A brand new 150 year old rifle. I love it!
Re: Big Butt is finished
Beautiful job, esp like the color, how did you get it that color if you don't mind my asking
-
- Levergunner 3.0
- Posts: 995
- Joined: Mon Feb 04, 2008 10:29 pm
- Location: Idaho panhandle/Wyoming
Re: Big Butt is finished
Beautiful job on a classic American long rifle! I have some idea of how much work goes in to one of those. I built a 40 cal "Carolina style Poor Boy" back in the "80s" to hunt squirrels with in Michigan. My Green Mountain 42" barrel liked 30 gr of 3F behind a 390 Round ball. Any squirrel that would remain stationary for a few seconds under 50 yds was meat in the pan.
This is plagiarized from someone else, but I love it!
I was born a gun owner.
It wasn't a choice.
I didn't become one later in life.
I was born this way.
I was born a gun owner.
It wasn't a choice.
I didn't become one later in life.
I was born this way.
- Shasta
- Senior Levergunner
- Posts: 1558
- Joined: Thu Sep 06, 2007 10:50 pm
- Location: Shasta County, the far right stronghold in California
Re: Big Butt is finished
An absolutely stunning rifle! I especially like the nose cap. Ya done good!
Shasta
Shasta
California Rifle & Pistol Association LIFE Member
National Rifle Association BENEFACTOR LIFE Member
http://www.hcrpclub.org/schedule.html
avatar pic is Shasta Dam, Shasta Lake, & Mt. Shasta
National Rifle Association BENEFACTOR LIFE Member
http://www.hcrpclub.org/schedule.html
avatar pic is Shasta Dam, Shasta Lake, & Mt. Shasta
Re: Big Butt is finished
Fine rifle! Wish I had 1 tenth your skills.
- Griff
- Posting leader...
- Posts: 20877
- Joined: Sat Mar 31, 2007 4:56 pm
- Location: OH MY GAWD they installed a STOP light!!!
Re: Big Butt is finished
Words could hardly do it justice...
Griff,
SASS/CMSA #93
NRA Patron
GUSA #93
There is a fine line between hobby & obsession!
AND... I'm over it!!
No I ain't ready, but let's do it anyway!
SASS/CMSA #93
NRA Patron
GUSA #93
There is a fine line between hobby & obsession!
AND... I'm over it!!
No I ain't ready, but let's do it anyway!
Re: Big Butt is finished
Octagon if your asking about the wood it has home made nitric acid stain and I add soot to my first coat of oil. You can rub it back where you want lighter areas on the stock.
Re: Big Butt is finished
Beautiful Hondo! I like the .40 cal too. It's big enough for deer here in Fla.and when target shooting there's so little recoil it's easy to shoot well. It's also small enough to thin out the local tree rats.
When I was shooting in our local club we had a fellow that was a something like a 5 time National Champ at Friendship. His rifle was a .40. He shot a .401 RB w/ a .15 pillow tick patch coated with Teflon, loaded
with a false muzzle
When I was shooting in our local club we had a fellow that was a something like a 5 time National Champ at Friendship. His rifle was a .40. He shot a .401 RB w/ a .15 pillow tick patch coated with Teflon, loaded
with a false muzzle
If you're gonna be stupid ya gotta be tough-
Isiah 55:8&9
It's easier to fool people than it is to convince them they have been fooled.
Isiah 55:8&9
It's easier to fool people than it is to convince them they have been fooled.
Re: Big Butt is finished
Hondo thanks for the info. Again, very nice job!
- Ysabel Kid
- Moderator
- Posts: 27918
- Joined: Mon Sep 17, 2007 7:10 pm
- Location: South Carolina, USA
- Contact: