STEVENS 425 IN 30 REMINGTON

Welcome to the Leverguns.Com Forum. This is a high-class place so act respectable. We discuss most anything here ... politely.

Moderators: AmBraCol, Hobie

Forum rules
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.

Please post political post in the new Politics forum.
Post Reply
moodyholler
Levergunner 2.0
Posts: 173
Joined: Tue Sep 25, 2007 5:33 pm
Location: Blue Ridge, Va

STEVENS 425 IN 30 REMINGTON

Post by moodyholler »

Picked up a nice reblued Stevens in 30 Rem. Bright bore and tight action. Now for some brass. Anyone know of a source? I can turn rims from 30-30 and recut extractor groove. This a possibility as I have a lathe, but wondered if any of the group may have some brass for sale/trade? Pics soon. Later, moodyholler
Top
BenT
Advanced Levergunner
Posts: 2720
Joined: Thu Sep 06, 2007 9:21 pm
Location: Northern Wisconsin

Re: STEVENS 425 IN 30 REMINGTON

Post by BenT »

Check around there was run of these a few years back. It's the parent cartridge of the 6.8 SPC , so they were tooled up to make some. I picked up a bag of 30 Rem to make 25 Rem . I have a few I haven't sized downed that I would part with you you can't find a source . I had to see that gun not being shot.
Top
moodyholler
Levergunner 2.0
Posts: 173
Joined: Tue Sep 25, 2007 5:33 pm
Location: Blue Ridge, Va

Re: STEVENS 425 IN 30 REMINGTON

Post by moodyholler »

Thanks
Top
BigSky56
Advanced Levergunner
Posts: 2356
Joined: Mon Sep 03, 2007 6:49 pm
Location: NW Montana

Re: STEVENS 425 IN 30 REMINGTON

Post by BigSky56 »

Grafs & sons has some 30 rem. danny
Top
moodyholler
Levergunner 2.0
Posts: 173
Joined: Tue Sep 25, 2007 5:33 pm
Location: Blue Ridge, Va

Re: STEVENS 425 IN 30 REMINGTON

Post by moodyholler »

Danny out of stock at Natchez but thanks
Top
BenT
Advanced Levergunner
Posts: 2720
Joined: Thu Sep 06, 2007 9:21 pm
Location: Northern Wisconsin

Re: STEVENS 425 IN 30 REMINGTON

Post by BenT »

I've called around for some brass. All I could find was Superior shooters supply(715-394-4982) has 12 pieces for $5 plus $4 shipping. Not sure if you found any yet. Let me know if that works for you.
Top
3leggedturtle
Advanced Levergunner
Posts: 4145
Joined: Fri Dec 21, 2007 11:34 am
Location: north of Palacios about 1400 miles

Re: STEVENS 425 IN 30 REMINGTON

Post by 3leggedturtle »

Fisherman's Corner in Duluth has it for $24 per 20 but he wont ship cuz he says he has to pay haz-mat fee on ammo.
30/30 Winchester: Not accurate enough fer varmints, barely adequate for small deer; BUT In a 10" to 14" barrelled pistol; is good for moose/elk to 200 yards; ground squirrels to 300 metres

250 Savage... its what the 223 wishes it could be...!
Top
moodyholler
Levergunner 2.0
Posts: 173
Joined: Tue Sep 25, 2007 5:33 pm
Location: Blue Ridge, Va

Re: STEVENS 425 IN 30 REMINGTON

Post by moodyholler »

Thanks for all the replies, I now have 8 pcs of brass and will shoot this weekend, later mh
Top
44shooter
Levergunner 3.0
Posts: 839
Joined: Wed May 13, 2009 11:55 pm

Re: STEVENS 425 IN 30 REMINGTON

Post by 44shooter »

Pics please?
Top
User avatar
earlmck
Advanced Levergunner
Posts: 3447
Joined: Tue Nov 30, 2010 12:10 am
Location: pert-neer middle of Oregon

Re: STEVENS 425 IN 30 REMINGTON

Post by earlmck »

I bought my 30 Rem brass from Reeds Ammo http://shop.reedsammo.com/main.sc He still shows it in stock for $50/100.
The greatest patriot...
is he who heals the most gullies. Patrick Henry
Top
Post Reply

Return to “General Discussion”