Winchester 1892

Welcome to the Leverguns.Com Forum. This is a high-class place so act respectable. We discuss most anything here ... politely.

Moderators: AmBraCol, Hobie

Forum rules
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.

Please post political post in the new Politics forum.
Post Reply
Babalooie
Levergunner
Posts: 42
Joined: Tue Apr 14, 2009 9:50 pm
Location: Near Chicago

Winchester 1892

Post by Babalooie »

I have a receiver and barrel for a model 1892 winchester. The threads on the receiver are pretty nasty. I read elsewhere the receiver and barrel are .809"-20. Does anyone know where I can get a tap and possibly die for this?
Top
Hagler
Senior Levergunner
Posts: 1522
Joined: Sun Apr 15, 2007 12:52 am
Location: Leverland, U.S.A.
Contact:
Contact Hagler

Re: Winchester 1892

Post by Hagler »

Babalooie,

Try McMaster-Carr:

http://www.mcmaster.com/#gun-taps/=p2f9qb

http://www.mcmaster.com/#dies/=p2fajd

You will have to browse, though.

Shawn
"That's right, Billy, I'm good with it. I hit what I shoot at, and I'm fast!"-Lucas McCain, c1882.
ImageImage
Top
Babalooie
Levergunner
Posts: 42
Joined: Tue Apr 14, 2009 9:50 pm
Location: Near Chicago

Re: Winchester 1892

Post by Babalooie »

Thanks.
Top
Post Reply

Return to “General Discussion”