Help; T/C Contender broke
Forum rules
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
-
3leggedturtle
- Advanced Levergunner
- Posts: 4145
- Joined: Fri Dec 21, 2007 11:34 am
- Location: north of Palacios about 1400 miles
Help; T/C Contender broke
No Hammer parts that I can find. Don't want to send it back to S+W. I have the hammer with the crossbolt safety, and fring pin selector that u turn with screwdriver. Numrich and Ed's are out. Any other you can think of? If I send it back, will get a different updated type hammer. Do not want that. This is 1st pistol I bought and want to keep it original.
30/30 Winchester: Not accurate enough fer varmints, barely adequate for small deer; BUT In a 10" to 14" barrelled pistol; is good for moose/elk to 200 yards; ground squirrels to 300 metres
250 Savage... its what the 223 wishes it could be...!
250 Savage... its what the 223 wishes it could be...!
Re: Help; T/C Contender broke
Not sure if this will help but it is a start. http://www.bellmtcs.com/store/index.php?cid=184