. Haven't been to walmart yet to see what they have in stock. thanksleather belts
Forum rules
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
-
rossim92
- Senior Levergunner
- Posts: 1429
- Joined: Sat Jan 01, 2011 2:42 am
- Location: mechanicsville, md.
leather belts
anybody here make custom leather belts? I am looking for one that is 1 7/8 wide and 46 " long. nothing fancy, just got my work uniforms and they have two inch wide loops. My belt is only one and a half inches wide, and the top of my pants roll over the edge of the belt. I found two inch belts online but i think they will be a bit tight in the loops to thread through the loops easily. any suggestions! Not looking to spend a fortune to hold my drawers up . Haven't been to walmart yet to see what they have in stock. thanks
. Haven't been to walmart yet to see what they have in stock. thanksRossi 92 .357 lever , and a cz pcr 9mm
Henry .22 lever, Remington speedmaster 552 .22 lr
Marlin Glenfield .22 boltaction
gforce 12ga semi
Taylor's Tactical 1911 A1 FS in .45acp
winchester 1873 44.40
Marlin 336W .30.30
beeman sportsman rs2 dual caliber pellet rifle
henry .22 magnum pumpaction/octagon barrel
stag 5.56 m4 with reddot
Henry .22 lever, Remington speedmaster 552 .22 lr
Marlin Glenfield .22 boltaction
gforce 12ga semi
Taylor's Tactical 1911 A1 FS in .45acp
winchester 1873 44.40
Marlin 336W .30.30
beeman sportsman rs2 dual caliber pellet rifle
henry .22 magnum pumpaction/octagon barrel
stag 5.56 m4 with reddot
-
Chuck 100 yd
- Advanced Levergunner
- Posts: 6972
- Joined: Tue Apr 03, 2007 8:52 pm
- Location: Ridgefield WA. USA
Re: leather belts
I do leather work but you will find the cost of leather so high that you can buy one as cheap as you can make one.(plain leather belt)
With shipping on top of it and cost of a buckle. Finding one locally is the way to go.
Now if you were talking holsters and gun belts, that is different. They are priced commensurate with quality and demand a price accordingly.
With shipping on top of it and cost of a buckle. Finding one locally is the way to go.
Now if you were talking holsters and gun belts, that is different. They are priced commensurate with quality and demand a price accordingly.
Re: leather belts
I have crossbreed holster's belts. Love them. www.crossbreedholsters.com
Kind regards,
Tycer
----------------------------------------------------------------
http://www.saf.org - https://peakprosperity.com/ - http://www.guntalk.com
Tycer
----------------------------------------------------------------
http://www.saf.org - https://peakprosperity.com/ - http://www.guntalk.com
-
7.62 Precision
- Senior Levergunner
- Posts: 1836
- Joined: Sat Mar 31, 2012 12:34 am
- Location: Alaska
- Contact:
Re: leather belts
Would this style work for you? They can be made in brown or black leather and any length within reason. 1.8" for this style, other styles are 1.5."
http://www.7-62precision.com/leather-do ... ster-belt/
http://www.7-62precision.com/leather-do ... ster-belt/
http://www.SHWAT.com
Front Line Holsters • http://www.7-62precision.com • Custom Finishes • http://www.762precision.wordpress.com
Front Line Holsters • http://www.7-62precision.com • Custom Finishes • http://www.762precision.wordpress.com
-
rossim92
- Senior Levergunner
- Posts: 1429
- Joined: Sat Jan 01, 2011 2:42 am
- Location: mechanicsville, md.
Re: leather belts
thanks anyways. just browsing for a new pants belt.
Rossi 92 .357 lever , and a cz pcr 9mm
Henry .22 lever, Remington speedmaster 552 .22 lr
Marlin Glenfield .22 boltaction
gforce 12ga semi
Taylor's Tactical 1911 A1 FS in .45acp
winchester 1873 44.40
Marlin 336W .30.30
beeman sportsman rs2 dual caliber pellet rifle
henry .22 magnum pumpaction/octagon barrel
stag 5.56 m4 with reddot
Henry .22 lever, Remington speedmaster 552 .22 lr
Marlin Glenfield .22 boltaction
gforce 12ga semi
Taylor's Tactical 1911 A1 FS in .45acp
winchester 1873 44.40
Marlin 336W .30.30
beeman sportsman rs2 dual caliber pellet rifle
henry .22 magnum pumpaction/octagon barrel
stag 5.56 m4 with reddot
-
J Miller
- Member Emeritus
- Posts: 14885
- Joined: Sat Mar 31, 2007 7:46 pm
- Location: Not in IL no more ... :)
Re: leather belts
A couple years ago I wanted a plain black pants belt big enough to fit me. I could not find any locally.
So I went to Tandy Leather on line and ordered a blank. Came with the buckle, the pre-cut belt, and the little ring the extra end of the belt fits into.
I also ordered die and finish.
When I got here I made it to fit myself and it cost less than what I could have bought a new belt on line for. What they'd cost now I don't know. But my home finished belt has held up just fine.
Joe
So I went to Tandy Leather on line and ordered a blank. Came with the buckle, the pre-cut belt, and the little ring the extra end of the belt fits into.
I also ordered die and finish.
When I got here I made it to fit myself and it cost less than what I could have bought a new belt on line for. What they'd cost now I don't know. But my home finished belt has held up just fine.
Joe
***Be sneaky, get closer, bust the cap on him when you can put the ball where it counts .***
.***-
L_Kilkenny
- Senior Levergunner
- Posts: 1204
- Joined: Mon Mar 02, 2009 9:00 pm
- Location: Iowa
- Contact:
Re: leather belts
I've made belts in the past from strap and accessories from Tandy but to be honest you might take a look at your local lumber yard and home improvement stores for 2" tool pouch belts. Plenty sturdy and usually around $20.
Re: leather belts
Galco pants belts - will 1.75" do?
http://www.usgalco.com/HolsterP2.asp
EDIT - when I re-clicked on the above link (which wasd supposedly the right belt page) just a generic page with little on it come up. If the same happens to you, go to the main site index and click on belts, then once on that page select 1-3/4" and several candidates show up.
Good luck!
http://www.usgalco.com/HolsterP2.asp
EDIT - when I re-clicked on the above link (which wasd supposedly the right belt page) just a generic page with little on it come up. If the same happens to you, go to the main site index and click on belts, then once on that page select 1-3/4" and several candidates show up.
Good luck!
Re: leather belts
Our turkey day paper had a flyer from Sheplers.
Belts on sale for $22.49.
Belts on sale for $22.49.
Re: leather belts
The last one I bought...
http://www.cabelas.com/product/Cabelas- ... l+Products
http://www.cabelas.com/product/Cabelas- ... l+Products
If you're gonna be stupid ya gotta be tough-
Isiah 55:8&9
It's easier to fool people than it is to convince them they have been fooled.
Isiah 55:8&9
It's easier to fool people than it is to convince them they have been fooled.
Re: leather belts
Amazon.com. 1 3/4" black belt. $25.00
Dave B
Dave B
-
rossim92
- Senior Levergunner
- Posts: 1429
- Joined: Sat Jan 01, 2011 2:42 am
- Location: mechanicsville, md.
Re: leather belts
thanks for the help will be looking a bit closer at yall's suggestions.
Rossi 92 .357 lever , and a cz pcr 9mm
Henry .22 lever, Remington speedmaster 552 .22 lr
Marlin Glenfield .22 boltaction
gforce 12ga semi
Taylor's Tactical 1911 A1 FS in .45acp
winchester 1873 44.40
Marlin 336W .30.30
beeman sportsman rs2 dual caliber pellet rifle
henry .22 magnum pumpaction/octagon barrel
stag 5.56 m4 with reddot
Henry .22 lever, Remington speedmaster 552 .22 lr
Marlin Glenfield .22 boltaction
gforce 12ga semi
Taylor's Tactical 1911 A1 FS in .45acp
winchester 1873 44.40
Marlin 336W .30.30
beeman sportsman rs2 dual caliber pellet rifle
henry .22 magnum pumpaction/octagon barrel
stag 5.56 m4 with reddot
-
ndcowboy
- Levergunner 2.0
- Posts: 268
- Joined: Fri Dec 21, 2007 10:24 am
- Location: Washburn, ND
- Contact:
Re: leather belts
El Paso Saddlery sells their ranger belt in 1 3/4 width. They are really, really good belts.
-
Old Ironsights
- Posting leader...
- Posts: 15084
- Joined: Mon Apr 02, 2007 9:27 am
- Location: Waiting for the Collapse
- Contact:
Re: leather belts
Lose the gut roll first...rossim92 wrote:,,, just got my work uniforms and they have two inch wide loops. My belt is only one and a half inches wide, and the top of my pants roll over the edge of the belt....s
C2N14... because life is not energetic enough.
מנא, מנא, תקל, ופרסין Daniel 5:25-28... Got 7.62?
Not Depressed enough yet? Go read National Geographic, July 1976
Gott und Gewehr mit uns!
מנא, מנא, תקל, ופרסין Daniel 5:25-28... Got 7.62?
Not Depressed enough yet? Go read National Geographic, July 1976
Gott und Gewehr mit uns!
-
rossim92
- Senior Levergunner
- Posts: 1429
- Joined: Sat Jan 01, 2011 2:42 am
- Location: mechanicsville, md.
Re: leather belts
thanks, i found this one on amazon.com http://www.amazon.com/Belts-com-Basketw ... 61&sr=1-12 ordered it today, i'm not a big fan of ordering clothes online. I like to try them out first.Dave B wrote:Amazon.com. 1 3/4" black belt. $25.00
Dave B
Rossi 92 .357 lever , and a cz pcr 9mm
Henry .22 lever, Remington speedmaster 552 .22 lr
Marlin Glenfield .22 boltaction
gforce 12ga semi
Taylor's Tactical 1911 A1 FS in .45acp
winchester 1873 44.40
Marlin 336W .30.30
beeman sportsman rs2 dual caliber pellet rifle
henry .22 magnum pumpaction/octagon barrel
stag 5.56 m4 with reddot
Henry .22 lever, Remington speedmaster 552 .22 lr
Marlin Glenfield .22 boltaction
gforce 12ga semi
Taylor's Tactical 1911 A1 FS in .45acp
winchester 1873 44.40
Marlin 336W .30.30
beeman sportsman rs2 dual caliber pellet rifle
henry .22 magnum pumpaction/octagon barrel
stag 5.56 m4 with reddot
Re: leather belts
Hereabouts (MI) Sheplers is a ferry service. LOL Maybe the same family.Mescalero wrote:Our turkey day paper had a flyer from Sheplers.
Belts on sale for $22.49.