Single Six Cylinders at Midway
Forum rules
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
-
- Advanced Levergunner
- Posts: 4145
- Joined: Fri Dec 21, 2007 11:34 am
- Location: north of Palacios about 1400 miles
Single Six Cylinders at Midway
That they have 8-shot 22lr and 22 mag cilynders for the Single Six, Anyone bought and fitted these?
30/30 Winchester: Not accurate enough fer varmints, barely adequate for small deer; BUT In a 10" to 14" barrelled pistol; is good for moose/elk to 200 yards; ground squirrels to 300 metres
250 Savage... its what the 223 wishes it could be...!
250 Savage... its what the 223 wishes it could be...!
Re: Single Six Cylinders at Midway
no...i'll have to look into this...my all-time favorite .22cal in anything (own two)... :)
Wow--that's neat...thanks for posting.... "Story 8-Round Replacement Cylinder Ruger Single Six 22 Long Rifle Steel Blue"
http://www.midwayusa.com/product/681957 ... steel-blue
Here's the Win. Mag... Story 8-Round Conversion Cylinder Ruger Single Six 22 Winchester Magnum Rimfire (WMR) Steel Blue http://www.midwayusa.com/product/732114 ... steel-blue
Story also makes and sells cylinders for the .17's on Midway... :)
Wow--that's neat...thanks for posting.... "Story 8-Round Replacement Cylinder Ruger Single Six 22 Long Rifle Steel Blue"
http://www.midwayusa.com/product/681957 ... steel-blue
Here's the Win. Mag... Story 8-Round Conversion Cylinder Ruger Single Six 22 Winchester Magnum Rimfire (WMR) Steel Blue http://www.midwayusa.com/product/732114 ... steel-blue
Story also makes and sells cylinders for the .17's on Midway... :)
You do not have the required permissions to view the files attached to this post.
Re: Single Six Cylinders at Midway
How much will it cost to rework the action, so that it will work properly?
Re: Single Six Cylinders at Midway
There is 1 review on the cylinder. The buyer stated it fit properly, but didnt turn. He used an emory cloth to finish off some sharp edges, and it now works fine. be interesting when more reviews are posted.
-
- Advanced Levergunner
- Posts: 6972
- Joined: Tue Apr 03, 2007 8:52 pm
- Location: Ridgefield WA. USA
Re: Single Six Cylinders at Midway
I hear they will fit and time without any modification to the guns lockwork.
I have never tried it myself.
Any others out there know for sure???
I have never tried it myself.
Any others out there know for sure???
Re: Single Six Cylinders at Midway
I have 3 NIB New Model Flattops- 1 in each barrel length, that would be neat to have 8 shot cylinders for them.
Perry
Perry
Perry in Bangor----++++===Calif