Got me a Daisy model 1894... need help.

Welcome to the Leverguns.Com Forum. This is a high-class place so act respectable. We discuss most anything here ... politely.

Moderators: AmBraCol, Hobie

Forum rules
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.

Please post political post in the new Politics forum.
Post Reply
User avatar
meanc
Levergunner 3.0
Posts: 902
Joined: Mon Apr 09, 2007 5:01 pm
Location: Fl

Got me a Daisy model 1894... need help.

Post by meanc »

Got it home today, cleaned it as best could, loaded it with a few BBs, pulled the trigger, and WHAMMO... the BB just rolled out.

I figure the seal needs replacing.

So I took apart the whole rifle; trigger group; main spring; barrel; magazine; etc...

Now my problem is twofold.

#1 Where do I find what parts I need?

#2 How the heck do I get it all back together once I get the parts.

If anyone has any recommendations I'd love to hear them.
...and I don't think he even knows it...Walks around with a half-assed grin...If he feels fear, he don't show it. Just rides into hell and back again.
Ben_Rumson
Advanced Levergunner
Posts: 2569
Joined: Sat Sep 15, 2007 12:51 pm

Re: Got me a Daisy model 1894... need help.

Post by Ben_Rumson »

"IT IS MY OPINION, AND I AM CORRECT SO DON'T ARGUE, THE 99 SAVAGE IS THE FINEST RIFLE EVER MADE IN AMERICA."
WIL TERRY
User avatar
meanc
Levergunner 3.0
Posts: 902
Joined: Mon Apr 09, 2007 5:01 pm
Location: Fl

Re: Got me a Daisy model 1894... need help.

Post by meanc »

Excellent. Just bought it.

Thanks.
...and I don't think he even knows it...Walks around with a half-assed grin...If he feels fear, he don't show it. Just rides into hell and back again.
Rusty
Advanced Levergunner
Posts: 9528
Joined: Mon Sep 03, 2007 6:37 pm
Location: Central Fla

Re: Got me a Daisy model 1894... need help.

Post by Rusty »

You might try Mac 1 Airguns. He does work on all manner of airguns.
If you're gonna be stupid ya gotta be tough-
Isiah 55:8&9

It's easier to fool people than it is to convince them they have been fooled.
User avatar
meanc
Levergunner 3.0
Posts: 902
Joined: Mon Apr 09, 2007 5:01 pm
Location: Fl

Re: Got me a Daisy model 1894... need help.

Post by meanc »

If the book I bought doesn't cover the reassembly procedure then I may just have to do that. Thanks for the heads up too.
...and I don't think he even knows it...Walks around with a half-assed grin...If he feels fear, he don't show it. Just rides into hell and back again.
Mossyoak1957
Levergunner 2.0
Posts: 497
Joined: Mon Oct 04, 2010 7:00 pm
Location: PA

Re: Got me a Daisy model 1894... need help.

Post by Mossyoak1957 »

After you load it you have to point it toward the ground and slide the spring loaded tab that's between the barrel and the mag tube toward the end of the barrel, that locks the BB's in.
pwl44m
Advanced Levergunner
Posts: 3613
Joined: Sat Sep 04, 2010 7:48 pm
Location: East Linda Caif.

Re: Got me a Daisy model 1894... need help.

Post by pwl44m »

How did U get it apart ? I bought one at a flea Mkt that someone had tried to shoot airsoft pellets in. Finally got it out and it works fine. Good Luck
Perry in Bangor----++++===Calif
Post Reply