Favorite Powder for 45-70 Marlin
Forum rules
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
Favorite Powder for 45-70 Marlin
Just ordered a guide gun, and will probably put 100 rounds of 300 jacketed HP through it, to smooth up the barrel. What would be a good powder? I have alittle bet of AA223 and 5744, but not much. What are some of the powders you like in the marlin?
-
- Levergunner 2.0
- Posts: 275
- Joined: Wed Mar 12, 2008 11:54 am
- Location: Dodge City, Kansas
Re: Favorite Powder for 45-70 Marlin
For full power paper patch loads I like AA2495.
Re: Favorite Powder for 45-70 Marlin
I use a lot of H322 for full power loads with heavy bullets.
Professional Hunter
http://www.TARSPORTING.com
"Worldwide Hunting Adventures"
Professional Hunters Assoc of South Africa
SCI - Life Member
NRA - Life Member
NAHC - Trophy Life Member
DWWC - Member
http://www.TARSPORTING.com
"Worldwide Hunting Adventures"
Professional Hunters Assoc of South Africa
SCI - Life Member
NRA - Life Member
NAHC - Trophy Life Member
DWWC - Member
Re: Favorite Powder for 45-70 Marlin
I use three powders. H-4895 for mid-power loads, and H-4198 for full power loads. (both Hodgdon's)
The most fun and useful loads around here though are with Unique and cast bullets. 15.5 grains under a 405g lead bullet, or 16.5g under a 365g cast gc ranch dog are both potent deer medicine in upper Michigan here. Also, tack driving accurate in my 1895CB.
The most fun and useful loads around here though are with Unique and cast bullets. 15.5 grains under a 405g lead bullet, or 16.5g under a 365g cast gc ranch dog are both potent deer medicine in upper Michigan here. Also, tack driving accurate in my 1895CB.
de k8bor
Dave
Dave
- 2ndovc
- Advanced Levergunner
- Posts: 9357
- Joined: Fri Sep 07, 2007 11:59 am
- Location: OH, South Shore of Lake Erie
Re: Favorite Powder for 45-70 Marlin
In my 1895 I've gotten fantastic accuracy with Varget and 350 gr Hornady JFPs.
jb
jb
jasonB " Another Dirty Yankee"
" Tomorrow the sun will rise. Who knows what the tide could bring?"
" Tomorrow the sun will rise. Who knows what the tide could bring?"
Re: Favorite Powder for 45-70 Marlin
I have used IMR3031 a little. So far I haven't loaded much for my Guide Gun.
D. Brian Casady
Quid Llatine Dictum Sit, Altum Viditur.
Advanced is being able to do the basics while your leg is on fire---Bill Jeans
Don't ever take a fence down until you know why it was put up---Robert Frost
Quid Llatine Dictum Sit, Altum Viditur.
Advanced is being able to do the basics while your leg is on fire---Bill Jeans
Don't ever take a fence down until you know why it was put up---Robert Frost
Re: Favorite Powder for 45-70 Marlin
31-35gr H4198 w/405gr. cast
25gr 2400 w/300gr cast
Both are plinking loads and very easy on the shoulder, but will down about anything in N.America. The load w/2400 is my plinking load that I shoot a lot of in my BFR.
25gr 2400 w/300gr cast
Both are plinking loads and very easy on the shoulder, but will down about anything in N.America. The load w/2400 is my plinking load that I shoot a lot of in my BFR.
-
- Member Emeritus
- Posts: 2277
- Joined: Mon Apr 02, 2007 9:22 pm
- Location: Crenshaw County, Alabama
Re: Favorite Powder for 45-70 Marlin
IMR 4198 has taken care of most of my .45-70 smokeless powder needs.
Doc Hudson, OOF, IOFA, CSA, F&AM, SCV, NRA LIFE MEMBER, IDJRS #002, IDCT, King of Typoists
Amici familia ab lectio est
UNITE!
Amici familia ab lectio est
UNITE!
Re: Favorite Powder for 45-70 Marlin
3031 for jacketed. 5744 for cast.
Re: Favorite Powder for 45-70 Marlin
54 gr. H322 under the 300 gr. jacketed bullets duplicates the factory 300 gr. loads.
Sincerely,
Hobie
"We are all travelers in the wilderness of this world, and the best that we find in our travels is an honest friend." Robert Louis Stevenson
Hobie
"We are all travelers in the wilderness of this world, and the best that we find in our travels is an honest friend." Robert Louis Stevenson
- O.S.O.K.
- Advanced Levergunner
- Posts: 5533
- Joined: Sun Apr 27, 2008 4:15 pm
- Location: Deep in the Piney Woods of Mississippi
Re: Favorite Powder for 45-70 Marlin
Yep, for factory duplication loads with the 300 JHP's, I use IMR-3031. Works very well.
NRA Endowment Life
Phi Kappa Sigma, Alpha Phi 83 "Skulls"
OCS, 120th MP Battalion, MSSG
MOLON LABE!
Phi Kappa Sigma, Alpha Phi 83 "Skulls"
OCS, 120th MP Battalion, MSSG
MOLON LABE!
-
- Advanced Levergunner
- Posts: 2054
- Joined: Mon Dec 10, 2007 12:43 pm
- Location: Between No Where & No Place, WA
Re: Favorite Powder for 45-70 Marlin
IMR 3031 + 300 JHP is what I load in my Marlin cowboy .45-70.
The most important aspect of this signature line is that you don't realize it doesn't say anything significant until you are just about done reading it & then it is too late to stop reading it....
Grand Poo Bah WA F.E.S.
In real life may you be the bad butt that you claim to be on social media.
Grand Poo Bah WA F.E.S.
In real life may you be the bad butt that you claim to be on social media.
Re: Favorite Powder for 45-70 Marlin
I use 3031 alot for higher end loads & 2400 for plinkers.
-
- Levergunner 3.0
- Posts: 918
- Joined: Thu Sep 27, 2007 5:09 pm
- Location: RHODE ISLAND
Re: Favorite Powder for 45-70 Marlin
Mostly H-322 for heavy loads. Sometimes H-335 for same. Trailboss for plinkin'.............
Thanks, Tom
Thanks, Tom
War sees no color, sex, or ethnic background - wars only see blood shed by our heroes for our freedoms.
I Am An American! Fighting for our Country and our way of life.
Fourth Generation Veteran and Proud !!
I Am An American! Fighting for our Country and our way of life.
Fourth Generation Veteran and Proud !!
Re: Favorite Powder for 45-70 Marlin
Jacketed bullets, IMR 3031; cast bullets, XMP 5744
- Buck Elliott
- Member Emeritus
- Posts: 2830
- Joined: Mon Sep 10, 2007 12:15 pm
- Location: Halfway up Sheep Mountain -- Cody, Wyoming
Re: Favorite Powder for 45-70 Marlin
H-322 for short-barrelled guide guns. 400 gr + bullets
22" tubes on up --- H-335
56 gr of H-335 under a LaserCast 400 gr. bullet gives me nearly 1900 fps from my '86 Extra Light.
22" tubes on up --- H-335
56 gr of H-335 under a LaserCast 400 gr. bullet gives me nearly 1900 fps from my '86 Extra Light.
Regards
Buck
Life has a way of making the foreseeable that which never happens, and the unforeseeable, that which your life becomes...
Buck
Life has a way of making the foreseeable that which never happens, and the unforeseeable, that which your life becomes...
-
- Levergunner 3.0
- Posts: 933
- Joined: Wed Jan 21, 2009 1:08 am
- Location: Salmon Creek, SW Washington
Re: Favorite Powder for 45-70 Marlin
From mild to wild 3031. That includes light to heavy bullets.
However, I have been playing around with 11grs of Unique with a 300gr cast for a FUN plinker!
2x22
However, I have been playing around with 11grs of Unique with a 300gr cast for a FUN plinker!
2x22
"Yes, we did produce a near-perfect republic. But will they keep it? Or will they, in the enjoyment of plenty, lose the memory of freedom? Material abundance without character is the path of destruction." - Thomas Jefferson
Re: Favorite Powder for 45-70 Marlin
I can't believe nobody mentioned RL7 yet! That's about all I use for 350's on up. 300-350 gr. cast bullets get thrown a lot with Unique or 5744.
NRA Life Member
- Buck Elliott
- Member Emeritus
- Posts: 2830
- Joined: Mon Sep 10, 2007 12:15 pm
- Location: Halfway up Sheep Mountain -- Cody, Wyoming
Re: Favorite Powder for 45-70 Marlin
I used lots of Rl-7, years ago, but i find I get better consistency with the H-335. Go figger...
Regards
Buck
Life has a way of making the foreseeable that which never happens, and the unforeseeable, that which your life becomes...
Buck
Life has a way of making the foreseeable that which never happens, and the unforeseeable, that which your life becomes...
Re: Favorite Powder for 45-70 Marlin
I prefer H322. Having written that, for those of you who prefer IMR 3031, I have an unopened 8-pound container of 3031 that I want to swap - swap, not sell - for 8 pounds of H322.
It's so simple to be wise. Just think of something stupid to say and then don't say it. Sam Levinson
Re: Favorite Powder for 45-70 Marlin
Thanks for all the help. Now if I could just get my gun!