Marlin 1895g vs 1895 in 45-70

Welcome to the Leverguns.Com Forum. This is a high-class place so act respectable. We discuss most anything here ... politely.

Moderators: AmBraCol, Hobie

Forum rules
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.

Please post political post in the new Politics forum.
Post Reply
bearhunter
Levergunner
Posts: 32
Joined: Fri Dec 11, 2009 12:58 pm

Marlin 1895g vs 1895 in 45-70

Post by bearhunter »

Which do you think would be the better choice for PA deer and black bear? I might use it for elk/moose/brown bear too, someday. The 1895 is supposed to be more accurate. Is that true? Does the 1895g loose enough velocity to make a difference?



Thanks.
User avatar
O.S.O.K.
Advanced Levergunner
Posts: 5533
Joined: Sun Apr 27, 2008 4:15 pm
Location: Deep in the Piney Woods of Mississippi

Re: Marlin 1895g vs 1895 in 45-70

Post by O.S.O.K. »

Guide gun vs what? Standard 20"? I don't think there's any difference in accuracy unless you are sticking with open/iron sights and then the shorter sight radius of the guide gun will allow for more sighting error. If you're going with optics, then no diff.

As to velocity, the 45-70 has a large expansion ratio being such a large caliber and beyond a certain point the velocity lossi is minimal compared to a smaller caliber. So, IMHO thats not a reason to choose one or the other.

The guide gun will carry easier, is lighter and will recoil a bit more... handles fewer rounds in the mag...

For the brown bear, the standard version's extra magazine capacity would be comforting...

Really depends on what your personal preferences are. Either one will be fully up to the tasks that you list.
NRA Endowment Life
Phi Kappa Sigma, Alpha Phi 83 "Skulls"
OCS, 120th MP Battalion, MSSG
MOLON LABE!
bearhunter
Levergunner
Posts: 32
Joined: Fri Dec 11, 2009 12:58 pm

Re: Marlin 1895g vs 1895 in 45-70

Post by bearhunter »

O.S.O.K. wrote:Guide gun vs what?

The 1895. It's the standard 22" barreled version.
tman
Advanced Levergunner
Posts: 3243
Joined: Fri Sep 21, 2007 6:43 pm

Re: Marlin 1895g vs 1895 in 45-70

Post by tman »

if you hunt the mountian ridges in the middle of the state the g is pretty handy. a 100 yard shot is LONG ONE in the brush country. older i get i want the lighter and shorter i want my rifles to get. the 45-70 drops a lot after 200 yards, which, again is a long way off in that terrian. don't think the extra barrel will give you much advantage at those ranges.
bearhunter
Levergunner
Posts: 32
Joined: Fri Dec 11, 2009 12:58 pm

Re: Marlin 1895g vs 1895 in 45-70

Post by bearhunter »

tman wrote:if you hunt the mountian ridges in the middle of the state the g is pretty handy. a 100 yard shot is LONG ONE in the brush country. older i get i want the lighter and shorter i want my rifles to get. the 45-70 drops a lot after 200 yards, which, again is a long way off in that terrian. don't think the extra barrel will give you much advantage at those ranges.


I'm over east 50miles north of Pittsburgh. It's pretty brushy and hilly. Thanks for the replies guys! And thanks to those who will!
76/444

Re: Marlin 1895g vs 1895 in 45-70

Post by 76/444 »

I find the shortest barrels to be more accurate than longest. At least at farther distances. Longer barrels, with slightly better velocity, does not result in better accuracy.

My choice would depend on what kind of hunting condition .

Heavy woods? Shorter barrel.

Open country? Longer barrel.
User avatar
O.S.O.K.
Advanced Levergunner
Posts: 5533
Joined: Sun Apr 27, 2008 4:15 pm
Location: Deep in the Piney Woods of Mississippi

Re: Marlin 1895g vs 1895 in 45-70

Post by O.S.O.K. »

Hmm - 22" you are right. I just checked the Marlin site and they both have the same 4 round mags too.

I have a Davidson's LTD 24" cowboy type model that has an 8-round mag.

I would go with the Guide Gun and its 18.5" barrel and standard capacity mag. For sure.

Image

And no ports! I hate ports.
NRA Endowment Life
Phi Kappa Sigma, Alpha Phi 83 "Skulls"
OCS, 120th MP Battalion, MSSG
MOLON LABE!
bearhunter
Levergunner
Posts: 32
Joined: Fri Dec 11, 2009 12:58 pm

Re: Marlin 1895g vs 1895 in 45-70

Post by bearhunter »

O.S.O.K. wrote:Hmm - 22" you are right. I just checked the Marlin site and they both have the same 4 round mags too.

I have a Davidson's LTD 24" cowboy type model that has an 8-round mag.

I would go with the Guide Gun and its 18.5" barrel and standard capacity mag. For sure.

Image

And no ports! I hate ports.

Me too! Those hurt you eyes (not to mention ears)! :)
User avatar
Blaine
Posting leader...
Posts: 30495
Joined: Mon Dec 17, 2007 2:22 pm
Location: Still Deciding

Re: Marlin 1895g vs 1895 in 45-70

Post by Blaine »

Just to be ornery, I like shooting my 1895 CB much mo betta than the 1895GS. Just balances better with the 26" BBL. I always feel like if you can't manuver a longer BBL rifle thru the thick stuff, better take up knitting :lol:
The Rotten Fruit Always Hits The Ground First

Proud Life Member Of:
NRA
Second Amendment Foundation
Citizens Committee For The Right To Keep And Bear Arms
DAV
User avatar
jeepnik
Advanced Levergunner
Posts: 6883
Joined: Sun Apr 08, 2007 1:39 pm
Location: On the Beach

Re: Marlin 1895g vs 1895 in 45-70

Post by jeepnik »

Of the three generally available barrel lengths, I prefer the guide gun length. You don't really give up enough accuracy, in fact some guides maybe more accurate than the others and vice versa. And, I doubt the reduction in muzzle velocity is worth worrying about. For me the guide guns handle better. Being shorter, they swing faster, and are easier to carry, both because of the length and weight. Then too, I prefer the straight stock as opposed to the pistol grip. Although I admit I like the look of pistol grip stocks, they don't feel as good to me as a straight stock.
Jeepnik AKA "Old Eyes"
"Go low, go slow and preferably in the dark" The old Sarge (he was maybe 24.
"Freedom is never more that a generation from extinction" Ronald Reagan
"Every man should have at least one good rifle and know how to use it" Dad
Pete44ru
Advanced Levergunner
Posts: 11242
Joined: Sun Sep 02, 2007 7:26 am

Re: Marlin 1895g vs 1895 in 45-70

Post by Pete44ru »

[And no ports! I hate ports.]

'Sounds like the Rhyme of the Ancient Mariner ! ;) :mrgreen:

.
tman
Advanced Levergunner
Posts: 3243
Joined: Fri Sep 21, 2007 6:43 pm

Re: Marlin 1895g vs 1895 in 45-70

Post by tman »

bearhunter wrote:
tman wrote:if you hunt the mountian ridges in the middle of the state the g is pretty handy. a 100 yard shot is LONG ONE in the brush country. older i get i want the lighter and shorter i want my rifles to get. the 45-70 drops a lot after 200 yards, which, again is a long way off in that terrian. don't think the extra barrel will give you much advantage at those ranges.


I'm over east 50miles north of Pittsburgh. It's pretty brushy and hilly. Thanks for the replies guys! And thanks to those who will!
i like to hunt chestnut ridge were routes 22 and 119 intersect. anywhere by you?
LeverBob
Senior Levergunner
Posts: 1028
Joined: Mon Sep 03, 2007 7:14 pm
Location: Dayton, Nevada

Re: Marlin 1895g vs 1895 in 45-70

Post by LeverBob »

Bearhunter...forget the 45-70, its very overrated. Find a .444 Outfitter with the ports...you won't believe how little they recoil. Power...rivals the 45-70 with almost no difference & much flatter shooting. Strap on a good .44 mag pistol & you can use the same bullet in both! Like a 310gr. Lee. A 290gr. Ranchdog. Take your pick pard.

I like the ports. On either rifle. There...I said it! :x Me & Marshall Stanton...Yeah, that's it! :mrgreen:

LB
Pete44ru
Advanced Levergunner
Posts: 11242
Joined: Sun Sep 02, 2007 7:26 am

Re: Marlin 1895g vs 1895 in 45-70

Post by Pete44ru »

Ballistically speaking, I don't think any animal will ever be able to tell the difference.

While I once owned a new M1895 in the mid-80's, then an 1895S (sporter), - when the guide Gun was introduced I found it (and it's concept) exciting, and so bought/shot/hunted with it for two years.

I then sold it after the 2 years (even though I wasn't bothered by the porting), to try first a .444 BB94 Timber Carbine, and then a .450M BB94 Timber, before settling back on the regular 2/3 mag, 22" bbl M1895 after realizing that it really did handle the best - not necessarily the fastest, just the best for me.

I usually hunt thick, swampy & brushy areas, and have never found the extra 3 1/2" of barrel to be a hinderance - but I've never scoped a .45-70 in my entire life. :roll:

YMMV, of course.

All that said, bearhunter, I think that a .45-70 just might be a bit too much gun for a young teenager to handle, and you would be better served with a .44 Magnum rifle.
My son's been using one successfully for the past 25 years, or so.

.
Last edited by Pete44ru on Sun Dec 13, 2009 6:45 pm, edited 1 time in total.
Chuck 100 yd
Advanced Levergunner
Posts: 6972
Joined: Tue Apr 03, 2007 8:52 pm
Location: Ridgefield WA. USA

Re: Marlin 1895g vs 1895 in 45-70

Post by Chuck 100 yd »

BlaineG said it my way!! I do have an 1895 with the short 22" barrel also. Both are shooters. :D
win92
Levergunner 2.0
Posts: 129
Joined: Mon Dec 17, 2007 9:01 pm
Location: Ontario Canada

Re: Marlin 1895g vs 1895 in 45-70

Post by win92 »

I prefer the slightly longer barrel 22" But that being said I don't want to carry a 26" either.
There will be a tiny bit more muzzle blast with the 18" guide gun but this topic all boils to personal preferance!! :mrgreen:
User avatar
Old Savage
Posting leader...
Posts: 16727
Joined: Mon Sep 03, 2007 3:43 pm
Location: Southern California

Re: Marlin 1895g vs 1895 in 45-70

Post by Old Savage »

I have tried them all and prefer the 22" 1895SS.
In the High Desert of Southern Calif. ..."on the cutting edge of going back in time"...

Image
User avatar
Blaine
Posting leader...
Posts: 30495
Joined: Mon Dec 17, 2007 2:22 pm
Location: Still Deciding

Re: Marlin 1895g vs 1895 in 45-70

Post by Blaine »

:P Strap on a good .44 mag pistol & you can use the same bullet in both!
Why, then you'd have two .429 +P shooters instead of a .459 Mag :P
The Rotten Fruit Always Hits The Ground First

Proud Life Member Of:
NRA
Second Amendment Foundation
Citizens Committee For The Right To Keep And Bear Arms
DAV
LeverBob
Senior Levergunner
Posts: 1028
Joined: Mon Sep 03, 2007 7:14 pm
Location: Dayton, Nevada

Re: Marlin 1895g vs 1895 in 45-70

Post by LeverBob »

BlaineG wrote:
:P Strap on a good .44 mag pistol & you can use the same bullet in both!
Why, then you'd have two .429 +P shooters instead of a .459 Mag :P
BWAAAAHAAAAAHAAAAHAAAA.......

LB
76/444

Re: Marlin 1895g vs 1895 in 45-70

Post by 76/444 »

Actually,... most 444 seem to be micro groove barrels which demand the use of a .432 diameter bullet. At least that is what I will be casting. I believe the 45/70 uses a .457 diameter bullet. Anyone want to claim "mine is bigger than yours" bragging rights,... have at it. But your only bragging on .025 of an inch difference.
Chuck 100 yd
Advanced Levergunner
Posts: 6972
Joined: Tue Apr 03, 2007 8:52 pm
Location: Ridgefield WA. USA

Re: Marlin 1895g vs 1895 in 45-70

Post by Chuck 100 yd »

I shoot .459`s in my .45-70`s. Hay, that`s way bigger (.027??? ) than any .444 bullet. :P
bearhunter
Levergunner
Posts: 32
Joined: Fri Dec 11, 2009 12:58 pm

Re: Marlin 1895g vs 1895 in 45-70

Post by bearhunter »

tman wrote:
bearhunter wrote:
tman wrote:if you hunt the mountian ridges in the middle of the state the g is pretty handy. a 100 yard shot is LONG ONE in the brush country. older i get i want the lighter and shorter i want my rifles to get. the 45-70 drops a lot after 200 yards, which, again is a long way off in that terrian. don't think the extra barrel will give you much advantage at those ranges.


I'm over east 50miles north of Pittsburgh. It's pretty brushy and hilly. Thanks for the replies guys! And thanks to those who will!
i like to hunt chestnut ridge were routes 22 and 119 intersect. anywhere by you?

I'm not shure. I google mapped it and it looks south of pitt.
76/444

Re: Marlin 1895g vs 1895 in 45-70

Post by 76/444 »

Chuck 100 yd wrote:I shoot .459`s in my .45-70`s. Hay, that`s way bigger (.027??? ) than any .444 bullet. :P


8) I guess you got me, that is a HUGE difference 8)
Last edited by 76/444 on Mon Dec 14, 2009 11:40 am, edited 2 times in total.
User avatar
fordwannabe
Advanced Levergunner
Posts: 3370
Joined: Thu Apr 02, 2009 8:52 am
Location: Womelsdorf PA

Re: Marlin 1895g vs 1895 in 45-70

Post by fordwannabe »

Bear hunter, my go to gun is a 1895ss. I tried the guide and kept the full size. just my opinion. Great shooters though. Tom
a Pennsylvanian who has been accused of clinging to my religion and my guns......Good assessment skills.
bearhunter
Levergunner
Posts: 32
Joined: Fri Dec 11, 2009 12:58 pm

Re: Marlin 1895g vs 1895 in 45-70

Post by bearhunter »

fordwannabe wrote:Bear hunter, my go to gun is a 1895ss. I tried the guide and kept the full size. just my opinion. Great shooters though. Tom

Is it a good woods gun with the long barrel?
User avatar
horsesoldier03
Advanced Levergunner
Posts: 2069
Joined: Sat Sep 08, 2007 7:32 pm
Location: Kansas

Re: Marlin 1895g vs 1895 in 45-70

Post by horsesoldier03 »

Buy both and have them sent to me. I will conduct a thorough evaluation of both rifles. Upon completion of the evaluation, I will immediately send you the best one! :lol:

Honestly, 18 1/2" vs 22", there really isnt much of a difference in weight, or velocity. Its all going to be which feels better when handling.
I would go to a store where I could handle both and make that decision when I was able to compare. For me, it might take several trips!
“Gun control is like trying to reduce drunk driving by making it tougher for sober people to own cars.”
.45colt
Advanced Levergunner
Posts: 4736
Joined: Fri Sep 07, 2007 5:00 am
Location: North Coast of America-Ohio

Re: Marlin 1895g vs 1895 in 45-70

Post by .45colt »

I bought the standard 1895 22" last spring.it is neither too long or short and I won't change a thing on it 'cept I put a sling on Her and it took 10 minutes to mount the Williams FP. Life is Good. 8) .
tman
Advanced Levergunner
Posts: 3243
Joined: Fri Sep 21, 2007 6:43 pm

Re: Marlin 1895g vs 1895 in 45-70

Post by tman »

bearhunter wrote:
tman wrote:
bearhunter wrote:
tman wrote:if you hunt the mountian ridges in the middle of the state the g is pretty handy. a 100 yard shot is LONG ONE in the brush country. older i get i want the lighter and shorter i want my rifles to get. the 45-70 drops a lot after 200 yards, which, again is a long way off in that terrian. don't think the extra barrel will give you much advantage at those ranges.


I'm over east 50miles north of Pittsburgh. It's pretty brushy and hilly. Thanks for the replies guys! And thanks to those who will!
i like to hunt chestnut ridge were routes 22 and 119 intersect. anywhere by you?

I'm not shure. I google mapped it and it looks south of pitt.
yea, se of pittsburgh in the old appalaichan mountain chain. beautiful country!
User avatar
Buck Elliott
Member Emeritus
Posts: 2830
Joined: Mon Sep 10, 2007 12:15 pm
Location: Halfway up Sheep Mountain -- Cody, Wyoming

Re: Marlin 1895g vs 1895 in 45-70

Post by Buck Elliott »

The .45-70 is what the .444 wishes it could be when it grows up... :P
Regards

Buck

Life has a way of making the foreseeable that which never happens, and the unforeseeable, that which your life becomes...
User avatar
Swampman
Levergunner 3.0
Posts: 916
Joined: Mon Dec 17, 2007 7:03 pm
Location: NW FL

Re: Marlin 1895g vs 1895 in 45-70

Post by Swampman »

I prefer the standard 1895 with a 22" barrel. I like the pistol grip stock. I'd like the Cowboy if it had a 20" barrel.
"I have reached up to the gun rack and taken down the .30/30 carbine by some process of natural selection, not condoned perhaps by many experts but easily explained by those who spend long periods in the wilderness areas."~Calvin Rutstrum~

"You come to the swamp, you better leave your skirt at the house"~Dave Canterbury~
User avatar
fordwannabe
Advanced Levergunner
Posts: 3370
Joined: Thu Apr 02, 2009 8:52 am
Location: Womelsdorf PA

Re: Marlin 1895g vs 1895 in 45-70

Post by fordwannabe »

I like it but at 6'1" and a used to be 400 pounds it really didn't matter that much weight wise and the extra barrel lenght hasn't been a problem either. Tom(now down to a svelt 330 and going down)
a Pennsylvanian who has been accused of clinging to my religion and my guns......Good assessment skills.
User avatar
Old Savage
Posting leader...
Posts: 16727
Joined: Mon Sep 03, 2007 3:43 pm
Location: Southern California

Re: Marlin 1895g vs 1895 in 45-70

Post by Old Savage »

I'm with Buck - if you are going to throw a big slow bullet, throw a BIG slow bullet.
In the High Desert of Southern Calif. ..."on the cutting edge of going back in time"...

Image
Paul LC
Levergunner
Posts: 32
Joined: Mon Sep 03, 2007 2:19 pm
Location: Houston, TX

Re: Marlin 1895g vs 1895 in 45-70

Post by Paul LC »

Old Savage wrote:I'm with Buck - if you are going to throw a big slow bullet, throw a BIG slow bullet.

I agree completely. Use a BIG SLOW bullet.

Wasn't there a time when a 405 grain bullet traveling at 1200 - 1300 fps was considered to be very effective?
Chas.
Levergunner 3.0
Posts: 823
Joined: Tue Dec 30, 2008 9:11 am
Location: Home of the Vols

Re: Marlin 1895g vs 1895 in 45-70

Post by Chas. »

76/444 wrote:I believe the 45/70 uses a .457 diameter bullet.
Some do, some don't. All groove diameters are not EXACTLY the same. SAAMI spec. is .458 but if you're using cast, you'll want another .001-.002 in bullet diameter. Either way it IS a true 45 caliber, and almost a 46.

I do agree that it's nice to have a handgun same caliber as your rifle, so I bought a BFR in 45-70. :D
User avatar
Buck Elliott
Member Emeritus
Posts: 2830
Joined: Mon Sep 10, 2007 12:15 pm
Location: Halfway up Sheep Mountain -- Cody, Wyoming

Re: Marlin 1895g vs 1895 in 45-70

Post by Buck Elliott »

I get a kick out of the guys who think they need a pistol-length carbine to manage "Heavy Brush." If the brush is that thick, you won't be doing any shooting anyway, no matter WHAT you're packing. How do you think men ever manage to get through thick willows and alders with an Eight-Foot Fly Rod, fer Heaven's sake...? :P

The thick-brush argument is a complete sham, perpetrated by long-forgotten Gun Writers, who had to blame something for their momentary (or persistant) lack of success.
Regards

Buck

Life has a way of making the foreseeable that which never happens, and the unforeseeable, that which your life becomes...
nemhed
Senior Levergunner
Posts: 1195
Joined: Sat Dec 22, 2007 2:36 pm

Re: Marlin 1895g vs 1895 in 45-70

Post by nemhed »

What I got a kick out of was the carbine length pistol in 45-70 that I briefly owned a couple of years ago! :shock: No joke, I had a T/C Contender with a 12" 45-70 barrel, that I got on trade. I fired about 3 rounds out of that configuration and did some more trading!
tman
Advanced Levergunner
Posts: 3243
Joined: Fri Sep 21, 2007 6:43 pm

Re: Marlin 1895g vs 1895 in 45-70

Post by tman »

Buck Elliott wrote:I get a kick out of the guys who think they need a pistol-length carbine to manage "Heavy Brush." If the brush is that thick, you won't be doing any shooting anyway, no matter WHAT you're packing. How do you think men ever manage to get through thick willows and alders with an Eight-Foot Fly Rod, fer Heaven's sake...? :P

The thick-brush argument is a complete sham, perpetrated by long-forgotten Gun Writers, who had to blame something for their momentary (or persistant) lack of success.
i don't hunt from a jeep or a helicopter. i don't do the canned hunt thing. for me, a 20" barreled lever works. it gets to my shoulder quick. as i get older, the lighter and shorter, the better. cause bearhunter and i hunt in simillar country i threw my opion out there for that reason. i get cold faster now, so i do more stalking than tree stand sitting. just my peabrain 2 cents worth.
User avatar
Buck Elliott
Member Emeritus
Posts: 2830
Joined: Mon Sep 10, 2007 12:15 pm
Location: Halfway up Sheep Mountain -- Cody, Wyoming

Re: Marlin 1895g vs 1895 in 45-70

Post by Buck Elliott »

tman wrote: i don't hunt from a jeep or a helicopter. i don't do the canned hunt thing. for me, a 20" barreled lever works. it gets to my shoulder quick. as i get older, the lighter and shorter, the better. cause bearhunter and i hunt in simillar country i threw my opion out there for that reason. i get cold faster now, so i do more stalking than tree stand sitting. just my peabrain 2 cents worth.
No canned hunts or jumpin' out of choppers here either, and the roads are usually a long way from the game... A 20" carbine would be about minimum length for me. The shorter ones just don't swing right in my hands. OTOH, my '86 Extra Light has its 22" barrel -- uncut -- and it's just about Perfect.

BTW, A 405-gr. bullet at 1900 fps ain't exactly slow...
Regards

Buck

Life has a way of making the foreseeable that which never happens, and the unforeseeable, that which your life becomes...
tman
Advanced Levergunner
Posts: 3243
Joined: Fri Sep 21, 2007 6:43 pm

Re: Marlin 1895g vs 1895 in 45-70

Post by tman »

Buck Elliott wrote:
tman wrote: i don't hunt from a jeep or a helicopter. i don't do the canned hunt thing. for me, a 20" barreled lever works. it gets to my shoulder quick. as i get older, the lighter and shorter, the better. cause bearhunter and i hunt in simillar country i threw my opion out there for that reason. i get cold faster now, so i do more stalking than tree stand sitting. just my peabrain 2 cents worth.
No canned hunts or jumpin' out of choppers here either, and the roads are usually a long way from the game... A 20" carbine would be about minimum length for me. The shorter ones just don't swing right in my hands. OTOH, my '86 Extra Light has its 22" barrel -- uncut -- and it's just about Perfect.

BTW, A 405-gr. bullet at 1900 fps ain't exactly slow...
yea, its more important how the gun fits the individual as opposed to some minor gains or losses of FPS. if you can't get it on target, you are just wasting powder and lead.
76/444

Re: Marlin 1895g vs 1895 in 45-70

Post by 76/444 »

Well,... seems like this is heading down the same old road again!! :lol:

So ,.... I'll just add my nickles worth.

If you take two 405 grn slugs, loaded at the same speed, from a 45/70 or a 444 ,... the only difference I am aware of (please correct me if I am wrong) would be better sectional density/penetration from the 444.

I personally carry on horse back, and my 22" barrel was FAR MORE uncomfortable to deal with than the 16.5" I cut her down to. And the balance greatly improved for me!!

No, I am not interested in crawling/hunting/shooting through thick brush to put meat in my belly,... but, I wouldn't think twice about defending my butt from a bear (where I pack in), that was coming from thick brush.

8)
FWIW,
76/444
You do not have the required permissions to view the files attached to this post.
NonPCnraRN
Levergunner 2.0
Posts: 349
Joined: Thu Sep 13, 2007 5:28 pm
Location: Stockton, CA.

Re: Marlin 1895g vs 1895 in 45-70

Post by NonPCnraRN »

76/444 wrote:Actually,... most 444 seem to be micro groove barrels which demand the use of a .432 diameter bullet. At least that is what I will be casting. I believe the 45/70 uses a .457 diameter bullet. Anyone want to claim "mine is bigger than yours" bragging rights,... have at it. But your only bragging on .025 of an inch difference.
I don't know of any 525 gr Piledrivers for the 444.
76/444

Re: Marlin 1895g vs 1895 in 45-70

Post by 76/444 »

NonPCnraRN wrote:
76/444 wrote:Actually,... most 444 seem to be micro groove barrels which demand the use of a .432 diameter bullet. At least that is what I will be casting. I believe the 45/70 uses a .457 diameter bullet. Anyone want to claim "mine is bigger than yours" bragging rights,... have at it. But your only bragging on .025 of an inch difference.
I don't know of any 525 gr Piledrivers for the 444.


Duuuuuuh, geeeeeee,.... and I don't know of any 750grn. piledrivers in 45/70!!
User avatar
txpete
Departed Friend
Posts: 1017
Joined: Thu Sep 13, 2007 6:36 pm
Location: bell co texas

Re: Marlin 1895g vs 1895 in 45-70

Post by txpete »

think the bottom line is how dead is dead.I shoot the 45/70,444 and my 375 win.I like all 3 but I am a gun nut which I thought all of us here are??.
everytime the 45/70-444 comes up I just shake my head.the truth is there isn't anything here in texas you can't kill with a 30/30 if you can shoot.
now flame this :lol: .
pete
DAV life member.
Image
76/444

Re: Marlin 1895g vs 1895 in 45-70

Post by 76/444 »

"...now flame this :lol: "




8) I like 8)
rjroberts
Levergunner
Posts: 38
Joined: Mon Jan 28, 2008 6:05 pm
Location: Largo, FL

Re: Marlin 1895g vs 1895 in 45-70

Post by rjroberts »

nemhed wrote:What I got a kick out of was the carbine length pistol in 45-70 that I briefly owned a couple of years ago! :shock: No joke, I had a T/C Contender with a 12" 45-70 barrel, that I got on trade. I fired about 3 rounds out of that configuration and did some more trading!

How about the Magnum Research BFR revolver in .45-70? But, I saw something one time that really took it: a DERRINGER (forgot the mfr.) in .45-70. I wanted to buy that just for novelty. No way would I be dumb enough to shoot it.

To toss another possibility to the original question, it is possible that the shorter barrel might be more accurate because of barrel resonance or, a lesser amount than the longer one.
Yes, I am a pirate,
200 years too late;
the cannons don't thunder,
there's nothing to plunder
for an over 40 victim of fate.
User avatar
O.S.O.K.
Advanced Levergunner
Posts: 5533
Joined: Sun Apr 27, 2008 4:15 pm
Location: Deep in the Piney Woods of Mississippi

Re: Marlin 1895g vs 1895 in 45-70

Post by O.S.O.K. »

I thought this thread was about which Marlin 95 configuration was preferable for the stated uses. :?

I'd still go with the guide version.
NRA Endowment Life
Phi Kappa Sigma, Alpha Phi 83 "Skulls"
OCS, 120th MP Battalion, MSSG
MOLON LABE!
User avatar
sore shoulder
Advanced Levergunner
Posts: 2611
Joined: Sat Sep 15, 2007 4:51 pm
Location: 9000ft in the Rockies

Re: Marlin 1895g vs 1895 in 45-70

Post by sore shoulder »

There is nothing the 444 can do that a 45-70 cant, but there is a lot the 45-70 can do that the 444 cant, and a lot the 444 can do that I wouldnt waste my time doing with a 45-70.

As to the 444 shooting flatter, Ive seen that argument, and seen it disproved thoroughly over and over. Its a myth.


Regarding the .457 45-70 bullet, most will start at .458 and go up from there, most cast bullets are .460. The .457 dia is meant for paper patching.

Now, to the question, I have both rifles, and here is my take. For the heavier bullets like my 560gr There is no need for the longer barrel, the shorter barrel gets all the velocity that bullet needs within its useable range, bit a nice flat shooting 300gr gets a lot fo help from the longer barrel.
"He has erected a multitude of New Offices, and sent hither swarms of Officers to harass our people and eat out their substance." Declaration of Independance, July 4, 1776
11B30
Bubba w/a 45/70
Levergunner
Posts: 20
Joined: Sun Jan 20, 2008 9:27 pm
Location: Mandan, North Dakota

Re: Marlin 1895g vs 1895 in 45-70

Post by Bubba w/a 45/70 »

If you haven't shot either style yet, that is the first thing that I'd recommend for yourself (the OP).

Getting something that is comfortable for yourself is the best thing that you can do for hunting.

I have the fun of being able to choose between the standard and my SBDB: a 16" "personalized" guide gun in 45/70 that started life as a standard. The SBDB really does handle much more quickly, but the standard 1895 has it when the overall hunting package is considered.

Just in case you needed a picture: :)

Image

I don't have the reddot on it anymore, as that didn't work very well in the field with me. Otherwise, it works very well for everything else, just like it's bigger brother.
Liberalism isn't just a disease anymore, it is a mental disorder.

Please read:
Ben Sira 2: 4-9
maddog
Levergunner
Posts: 47
Joined: Tue Jan 01, 2008 8:06 am
Location: Indiana

Re: Marlin 1895g vs 1895 in 45-70

Post by maddog »

I have a guide gun. I've used it on bears, hogs, and took it to Africa for plains game in 2008. The big difference, I see, between it and the standard model, is the pistol vs. straight grip. With extremely stout loads, the pistol grip is easier to control, than the straight grip, for optimum accuracy. That being said, I've killed critters successfully out to 200 yds. with the guide gun. It is also extremely easy to put into action in brush or an enclosed blind. JMHO.

maddog
Post Reply