barrel porting

Welcome to the Leverguns.Com Forum. This is a high-class place so act respectable. We discuss most anything here ... politely.

Moderators: AmBraCol, Hobie

Forum rules
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.

Please post political post in the new Politics forum.
Post Reply
greyowl
Levergunner
Posts: 39
Joined: Sat Sep 05, 2009 7:08 am
Location: Maine woods

barrel porting

Post by greyowl »

How much change in recoil do you get from barrel porting?
I'm thinking of the Marlin guide type guns that had it. 45-70, 450,444. I realize it could vary a little between calibers, but in general. Is there a % or specific amount of foot lbs. that should be expected in these rifles with the factory porting?
Shooting is the national passtime/ walk softly and carry a big stick
Kapincrunch
Levergunner
Posts: 37
Joined: Tue Dec 18, 2007 12:59 pm

Re: barrel porting

Post by Kapincrunch »

I dont think they change recoil as much as they effect muzzle flip. The idea being that you should be able to get back on target faster. But, the ports are utterly deafening. I actually sold a 450 Marlin (fantastic little gun) simply because the stinking thing was so loud. Now, I put a really good recoil pad on the gun and that changed the recoil drastically.
Pete44ru
Advanced Levergunner
Posts: 11242
Joined: Sun Sep 02, 2007 7:26 am

Re: barrel porting

Post by Pete44ru »

They definitely reduce muzzle flip, by as much as 25% IMHO.

Muzzle brakes never bothered me, like making my ears ring, etc - although they bother OTHER range users allright.
I always wear ear protection during range zeroing/practice/etc, but not while hunting - and have never consiously been aware of any shot on game, except for feeling the recoil force and hearing a "bang".
I suppose it's because I was focused on the animal/excited, at the time(s).

.
gimdandy
Levergunner 2.0
Posts: 225
Joined: Tue Oct 09, 2007 11:04 pm
Location: Idaho

Re: barrel porting

Post by gimdandy »

The change is significant . That being said it depends on HOW the porting is done , the exact results that you want , and intended purpose. On the guide and the outfitter , the way it is done is on top of the barrel on both side of the front sight which helps some of the recoil and helps a lot of the muzzle rise. If the porting is the entire circumference of the barrel the change of felt recoil is dramatic and less muzzle rise is a direct result .
Now be prepared for a change of muzzle blast. If the porting is the entire circumference of the barrel the blast deafening w/o ear protection, if it is just on top it is normal blast for the shooter or anyone standing directly behind , but to the side of barrel it is noticeably lots louder to others w/o ear protection .
I've used round holes , angled round holes , and angled trapezoidal slots from Magnaport w/ 100% consistent results on rifles and competition shotguns. No experience w/ a pistol barrel
User avatar
AJMD429
Posting leader...
Posts: 33527
Joined: Sun Sep 09, 2007 10:03 am
Location: Hoosierland

Re: barrel porting

Post by AJMD429 »

Pete44ru wrote:They definitely reduce muzzle flip, by as much as 25% IMHO.

Muzzle brakes never bothered me, like making my ears ring, etc - although they bother OTHER range users allright.
I always wear ear protection during range zeroing/practice/etc, but not while hunting - and have never consiously been aware of any shot on game, except for feeling the recoil force and hearing a "bang".
I suppose it's because I was focused on the animal/excited, at the time(s).

.
Same here, only I also wear muffs when hunting (Howard Leight electonics - they amplify the deer footsteps on the ridge just out of sight, but clip gunshots down to the same level as regular muffs).

I don't have any two identical guns where one is ported, but I do have two ported guns. One is a Taurus Tracker .357, and it definitely helps reduce recoil, but I doubt affects noise much. The other is a ported Guide Gun; it sure doesn't seem to recoil much with 'normal' modern ammunition, but maybe the really hot stuff could make it painful. Thankfully, no Grizzlys around here, so if a 'normal' .45-70 won't stop what I'm shooting at in its tracks, I'm likely to just drop the gun and RUN...! :? :shock:
It's 2025 - "Cutesy Time is OVER....!" [Dan Bongino]
TuPapito
Levergunner
Posts: 21
Joined: Thu Sep 20, 2007 2:57 pm
Contact:

Re: barrel porting

Post by TuPapito »

The ports on my 300 Weatherby turned it from Der Loudenboomer Ouchencauser to something as comfortable as a .243 Winchester. Reduced the recoil by around 50%.
86er
Advanced Levergunner
Posts: 4703
Joined: Sat Mar 31, 2007 2:58 pm
Location: Republic of Texas

Re: barrel porting

Post by 86er »

Bartlett's Viaso system is supposed to be 50% reduction guaranteed. There in Hondo, Texas.
Professional Hunter
http://www.TARSPORTING.com
"Worldwide Hunting Adventures"

Professional Hunters Assoc of South Africa
SCI - Life Member
NRA - Life Member
NAHC - Trophy Life Member
DWWC - Member
Post Reply