Burris Signature rings?

Welcome to the Leverguns.Com Forum. This is a high-class place so act respectable. We discuss most anything here ... politely.

Moderators: AmBraCol, Hobie

Forum rules
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.

Please post political post in the new Politics forum.
Post Reply
odinohi
Levergunner 1.0
Posts: 77
Joined: Sun Apr 05, 2009 8:33 am
Location: Clyde, Ohio

Burris Signature rings?

Post by odinohi »

Is there any way to get a set of these rings for a Winchester 9422? I ordered a set of Weaver type Sign Zee rings and they were way to big for my gun. I'll keep them for future use. Burris's web site didnt give any measurements for there rings. Niether did Grafs, but the pic on Grafs site looked like they might have worked. This is for a new FX1 rimfire Leupold that I just bopught and would like to keep protected. Thanks all. Tom
Top
Chuck 100 yd
Advanced Levergunner
Posts: 6972
Joined: Tue Apr 03, 2007 8:52 pm
Location: Ridgefield WA. USA

Re: Burris Signature rings?

Post by Chuck 100 yd »

What nobearsyet said +1 Saw a set on Midway`s site made by Warne that looked good also. You can use the rings you have. :D I looked but cant seem to find them today. A phone call would fix that though. :D
Top
sureshot
Levergunner 2.0
Posts: 154
Joined: Mon Dec 17, 2007 10:12 am
Location: WA State

Re: Burris Signature rings?

Post by sureshot »

Here is what you need, also available in high and gloss finish at Midway;

http://www.midwayusa.com/viewProduct/?p ... ber=547603

I just bought a set for my CZ 452 along with a set of the offset inserts so I can shoot it out to 300yd.

Steve
Top
Post Reply

Return to “General Discussion”