.30-30 using 2400 and cast bullets

Welcome to the Leverguns.Com Forum. This is a high-class place so act respectable. We discuss most anything here ... politely.

Moderators: AmBraCol, Hobie

Forum rules
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.

Please post political post in the new Politics forum.
Post Reply
Rodfac
Levergunner
Posts: 13
Joined: Thu Dec 25, 2008 1:20 pm

.30-30 using 2400 and cast bullets

Post by Rodfac »

Does anyone have information on 2400 with cast bullets in the .30-30. I've got a Model 94 Winchester that I'm experimenting with using a commercially cast 170 gr Gas Check bullet with a flat point. TIA Rodfac
Top
colo native
Levergunner 2.0
Posts: 383
Joined: Fri Dec 21, 2007 9:02 pm
Location: ruin va

Re: .30-30 using 2400 and cast bullets

Post by colo native »

look in an older lyman book 41 to 45
Top
colo native
Levergunner 2.0
Posts: 383
Joined: Fri Dec 21, 2007 9:02 pm
Location: ruin va

Re: .30-30 using 2400 and cast bullets

Post by colo native »

2400 15.0 ge =1633fps 21.0gr=2053fps per Lyman 44 book pg 61
Top
Chuck 100 yd
Advanced Levergunner
Posts: 6972
Joined: Tue Apr 03, 2007 8:52 pm
Location: Ridgefield WA. USA

Re: .30-30 using 2400 and cast bullets

Post by Chuck 100 yd »

Here is some.
http://www.gmdr.com/lever/lowveldata.htm
Have fun!! :D
Top
Post Reply

Return to “General Discussion”