Rossi barrel question

Welcome to the Leverguns.Com Forum. This is a high-class place so act respectable. We discuss most anything here ... politely.

Moderators: AmBraCol, Hobie

Forum rules
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.

Please post political post in the new Politics forum.
Post Reply
Al
Levergunner 1.0
Posts: 58
Joined: Mon Sep 03, 2007 3:06 pm
Location: Michigan

Rossi barrel question

Post by Al »

I need the width of a 44 or 45cal octagon barreled Rossi, both at the muzzle and at the breech end.
(not sure if it's tapered)

thx.
Top
Boreman
Levergunner 3.0
Posts: 532
Joined: Thu Sep 06, 2007 5:51 pm
Location: St.Albans,WV

Re: Rossi barrel question

Post by Boreman »

Al wrote:I need the width of a 44 or 45cal octagon barreled Rossi, both at the muzzle and at the breech end.
(not sure if it's tapered)

thx.
Al, I have a SS Oct. Bbl. Rossi M-92 in 44-40. Best I can measure across the flats is .820 at the muzzle and .820 at the breach. Hope this helps.
Model-71's forever !!!!
NRA Patriot Life Member
Endowment level
FOPA #5
GOA,Inc
WVCDL,INC
Top
Al
Levergunner 1.0
Posts: 58
Joined: Mon Sep 03, 2007 3:06 pm
Location: Michigan

Re: Rossi barrel question

Post by Al »

thanks.

I found a stainless 475 blank I had tucked away for whatever reason, thought maybe I'd rebarrel this 480 of mine in octagon if there was enough room.
Top
Post Reply

Return to “General Discussion”