Mike Venturino - from American Handgunner

Welcome to the Leverguns.Com Forum. This is a high-class place so act respectable. We discuss most anything here ... politely.

Moderators: AmBraCol, Hobie

Forum rules
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.

Please post political post in the new Politics forum.
Post Reply
User avatar
JimT
Shootist
Posts: 6321
Joined: Thu Sep 06, 2007 5:04 pm

Mike Venturino - from American Handgunner

Post by JimT »

User avatar
rock-steady
Levergunner 2.0
Posts: 456
Joined: Tue Dec 18, 2007 7:35 am
Location: Deplorable Red State

Re: Mike Venturino - from American Handgunner

Post by rock-steady »

Sad to hear that. I liked Mike.
"People who need long explanations at moments when everything depends on instinct have always irritated me." ~ Guy Sajer
Bill in Oregon
Advanced Levergunner
Posts: 9863
Joined: Sun Jun 29, 2008 10:05 am
Location: The Land of Enchantment

Re: Mike Venturino - from American Handgunner

Post by Bill in Oregon »

Jim, that's a nice start, but I hope to see a lot more about Mike, his work and the influence his passion for the real guns of the Old West and the Great Buffalo Hunt have had on the shooting public. I had an early edition of the "Black Powder Cartridge Reloading Primer" that he and Steve Garbe wrote -- autographed by both of them -- and was a charter subscriber of the Black Powder Cartridge News years back. I recently gave my copy of Mike's "Shooting Buffalo Rifles of the Old West" to a young friend in hopes there is a deep and lingering infection ... 8)
User avatar
Pat C
Levergunner 3.0
Posts: 979
Joined: Thu Feb 18, 2021 8:19 pm

Re: Mike Venturino - from American Handgunner

Post by Pat C »

I'm hoping that there will be a number of dedications made about him . I have many many of his articles in various magazines,trade papers ,and the like.
User avatar
Griff
Posting leader...
Posts: 21166
Joined: Sat Mar 31, 2007 4:56 pm
Location: OH MY GAWD they installed a STOP light!!!

Re: Mike Venturino - from American Handgunner

Post by Griff »

I first met Mike in 1986 at EOT when it was held in Coto de Caza in Southern California. After he witnessed my attempt at the long range side match with a .53 caliber Hawken, he suggested a cartridge rifle would be a better choice. Over the next several months we talked quite a bit about the various choices available. We also discussed cartridge options. As I wanted the rifle for both match shooting and hunting, I settled on a .40-90SBN in an 1874 Sharps. We posse'd together one year before we renewed our acquaintance in 1990 at the NRA BPCR Silhouette Nationals at the Whittington Center, in NM. I finished my first match as a firm middle of the pack "B" class shooter. A few weeks before the 1991 match he called and asked if I was attending again. He asked if I would show up in my full cowboy gear, and compete so attired. We both acknowledged that I really wasn't a real serious contender, and he knew I enjoyed all aspects of the guns and lore of the old west.

When I arrived, he told me he had an ulterior motive. He'd been asked to have someone available to pose for a sculptor for the New Mexico Champion trophy BPCRS. I said sure... but was very nervous. The lady sculptor took several pictures and was gracious enough to send me copies.

I believe this one was the pose selected.
th_sititing.jpg
As the 1991 match progressed, I had a protest lodged against me for the standing, off-hand 200 yard chickens. As part of my attire I wore a cartridge belt, that held approximately 50 or so rounds of ammo. The protest was based on the prohibition against wearing a back brace. As a match official Mike made the call that I couldn't wear the belt, and personally informed me of the decision; gracefully apologizing for having asked me to compete in my full regalia, including the belt, then telling me I couldn't. At the conclusion of all rounds, I found myself in a 10-way tie for 3rd place in "B" class. By foregoing any sighters I had enough rounds to survive 3 rounds in the shoot-off. Prior to 4th round shoot-off I asked around if any one had any 370 grain .410 diameter bullets so I could reload some ammo. Mike V. was also shooting a .40 caliber Sharps and kindly offered me however many bullets I needed and any primers, or additional powder I might need. He was shooting 410 grain bullets, that difference in weight, and the condition of my shoulder after 210 rounds in the .40-90SBN at 85 grains per had me declining his offer. I finished the match in 7th place, having run 30 pigs in the shootoff.
DSCN1583[1].JPG
That small trophy sits on my mantle as a reminder of that achievement and of a gracious and honored friend, Mike Venturino. Truly, a scholar and gentleman. He will be missed by many, especially this man. My prayers for his many friends, colleagues, and especially Yvonne.

Sorry for being long winded, as I'm sure others have stories to tell of their interaction with him.
You do not have the required permissions to view the files attached to this post.
Griff,
SASS/CMSA #93
NRA Patron
GUSA #93

There is a fine line between hobby & obsession!
AND... I'm over it!!
No I ain't ready, but let's do it anyway!
Bill in Oregon
Advanced Levergunner
Posts: 9863
Joined: Sun Jun 29, 2008 10:05 am
Location: The Land of Enchantment

Re: Mike Venturino - from American Handgunner

Post by Bill in Oregon »

Griff, please feel free to be long-winded any time you want to! Thank you so much for sharing these personal memories. I never met Mike except in print. I am heartily sorry the glory days of BPCR seem to be behind us. I shot very informally at long range steel with a Trapdoor, but never seriously, with a Soule-sighted Sharps or Remington. Always wanted to.
william iorg
Levergunner 2.0
Posts: 244
Joined: Fri Aug 31, 2007 7:50 pm

Re: Mike Venturino - from American Handgunner

Post by william iorg »

Sad news indeed. I remember pictures of a much younger Mike shooting .44 Magnums from his Ransome rest. That and his Love for the .308 Winchester.
Slim
User avatar
KWK
Senior Levergunner
Posts: 1504
Joined: Fri Sep 07, 2007 10:31 am
Location: U.S.A.
Contact:

Re: Mike Venturino - from American Handgunner

Post by KWK »

Venturino had written about his wife's contributions to his work a while back.
User avatar
GunnyMack
Advanced Levergunner
Posts: 10984
Joined: Mon Sep 19, 2016 7:57 am
Location: Not where I want to be!

Re: Mike Venturino - from American Handgunner

Post by GunnyMack »

She did the photography for his articles as well.
BROWN LABS MATTER !!
User avatar
OldWin
Advanced Levergunner
Posts: 9767
Joined: Fri Oct 09, 2009 2:38 pm

Re: Mike Venturino - from American Handgunner

Post by OldWin »

Sad news. I always liked his writing. He seemed like a straight up guy.
God Speed sir.
"Oh bother", said Pooh, as he chambered another round.
Bob Hatfield
Levergunner 2.0
Posts: 132
Joined: Mon Jan 21, 2008 6:49 am
Location: Daniels, WV

Re: Mike Venturino - from American Handgunner

Post by Bob Hatfield »

I remember back in the early 80s (I think) buying his book (big magazine) on 22 Centerfires. That was my first exposure to his writing. He told of going to live in Montana and needed to make himself a varmint rifle. He said the guy's that lived there outshot him with their 270s and 3006s shooting critters at long range because they knew their guns.

Bob
User avatar
olyinaz
Advanced Levergunner
Posts: 3979
Joined: Sat Nov 28, 2009 2:19 pm
Location: Tucson, AZ

Re: Mike Venturino - from American Handgunner

Post by olyinaz »

I very much enjoyed his writings over the years, and this is sad news indeed.

Oly
User avatar
peter richards
Levergunner 2.0
Posts: 168
Joined: Thu Jan 03, 2008 4:59 am
Location: Kundabung, Australia

Re: Mike Venturino - from American Handgunner

Post by peter richards »

Very sad, I have enjoyed his writing for many years. RIP.
Pete
Levergunner Down Under
NRA Life Member
SSAA
SASS
WACA
Shooters & Fishers Party
User avatar
LeverGunner
Levergunner 3.0
Posts: 637
Joined: Mon Mar 18, 2024 11:27 am
Location: Cecilia, Kentucky
Contact:

Re: Mike Venturino - from American Handgunner

Post by LeverGunner »

I was saddened to learn of his passing. I enjoyed his writings from the early even unto the later stuff.
The Lord is my shepherd; I shall not want.

BulletMatch: Cataloging the World's Bullets.

Lead Alloy Calculator
Post Reply