Breaking in the S&W 442

Welcome to the Leverguns.Com Forum. This is a high-class place so act respectable. We discuss most anything here ... politely.

Moderators: AmBraCol, Hobie

Forum rules
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.

Please post political post in the new Politics forum.
Post Reply
User avatar
2ndovc
Advanced Levergunner
Posts: 9453
Joined: Fri Sep 07, 2007 11:59 am
Location: OH, South Shore of Lake Erie

Breaking in the S&W 442

Post by 2ndovc »

I had a chance to stop by a friend's farm on the way home today and try out the new 442. Started with a older box of Remington 158 gr LRN that an uncle had given me along with three more boxes and some other stuff. Figured it was a good place to start.
Went through about half a box and finally started to get used to the DAO. It's not bad, but needs several hundred more rounds through it I think. The 642 that I had was fairly smooth, but it was well used and broken in. The target in the picture was shot with 125 gr Hornady XTPs and Tightgroup load that shoots well through my dad's Colt Troopers. Shooting was two hands at 10 yards. Not spectacular but not horrible for the first time out.
Image

I'd also taken along the .40 S&W Blackhawk. I can't get over how much I like shooting this revolver. I backed off to @ 25 yds./ paces, shooting with one hand. just picked it up from the gunsmith on Monday. I had him install an SBH hammer. Big difference!
Image

Nice way to finish a day. :D

jb 8)
Last edited by 2ndovc on Thu Jul 22, 2021 5:02 pm, edited 1 time in total.
jasonB " Another Dirty Yankee"


" Tomorrow the sun will rise. Who knows what the tide could bring?"
User avatar
Scott Tschirhart
Advanced Levergunner
Posts: 4559
Joined: Fri Oct 16, 2020 2:56 pm
Location: San Antonio, Texas

Re: Breaking in the S&W 442

Post by Scott Tschirhart »

That's a great way to spend any day. The 442 will smooth up with use or your finger will get stronger. Either way, you get better with it as you shoot it more.
JOG
Levergunner 3.0
Posts: 618
Joined: Wed Feb 06, 2019 5:04 pm
Location: southern Maine

Re: Breaking in the S&W 442

Post by JOG »

I just pickup a 2005 Ruger Blackhawk Anniversary 357 mag.
I took it across the street to try her out, after a little bit of oil on the ratchet.
The hammer is so light in cocking this model. The trigger is fantastic!
I shot from 15 to 30 yard's with very few misses!
I put 46 rounds thru her. Mostly Federal 38 spl.
12 rounds of PMC 357 mag.
You've got to love Blackhawks!
Good luck with your 642!
Johnny :P
User avatar
ollogger
Advanced Levergunner
Posts: 2826
Joined: Mon Jul 05, 2010 2:47 pm
Location: Wheatland Wyoming
Contact:

Re: Breaking in the S&W 442

Post by ollogger »

Good way to hang out with a coupke of buds!
have a 642 that i carry most all the time, wore out the rubber grips from the constant carry, it shoots more
to poa with a 125 gr. load but i load 158 cast +p for carry & 2 snake shot loads this time of year



ollogger
User avatar
Grizz
Advanced Levergunner
Posts: 12366
Joined: Fri Aug 31, 2007 7:15 pm

Re: Breaking in the S&W 442

Post by Grizz »

Looks like a great time. makes me want to make a date with my wheelguns to see if they still shoot straight. :)
User avatar
Blaine
Posting leader...
Posts: 30496
Joined: Mon Dec 17, 2007 2:22 pm
Location: Still Deciding

Re: Breaking in the S&W 442

Post by Blaine »

I imagine that Wolff springs could lighten up that DAO for you. :idea:
The Rotten Fruit Always Hits The Ground First

Proud Life Member Of:
NRA
Second Amendment Foundation
Citizens Committee For The Right To Keep And Bear Arms
DAV
User avatar
2ndovc
Advanced Levergunner
Posts: 9453
Joined: Fri Sep 07, 2007 11:59 am
Location: OH, South Shore of Lake Erie

Re: Breaking in the S&W 442

Post by 2ndovc »

That thought had crossed my mind. I'll see what a couple more boxes of .38s do, but I'll probably order one.

jb 8)
jasonB " Another Dirty Yankee"


" Tomorrow the sun will rise. Who knows what the tide could bring?"
User avatar
Scott Tschirhart
Advanced Levergunner
Posts: 4559
Joined: Fri Oct 16, 2020 2:56 pm
Location: San Antonio, Texas

Re: Breaking in the S&W 442

Post by Scott Tschirhart »

Wilson Combat makes a good spring kit for these little guns. The springs lighten things up quite a bit, but they are stout enough to always light a primer and return the trigger to battery. I got mine at Midway for about $10 as I recall.
guido4198
Senior Levergunner
Posts: 1040
Joined: Sat Sep 08, 2007 8:08 am
Location: S. E. Florida

Re: Breaking in the S&W 442

Post by guido4198 »

I wasn’t about to wait for my 642 to “ break-in”.
Installed an Apex spring kit then took a set of stones and some oil to the internals.
Much improved..!
User avatar
Scott Tschirhart
Advanced Levergunner
Posts: 4559
Joined: Fri Oct 16, 2020 2:56 pm
Location: San Antonio, Texas

Re: Breaking in the S&W 442

Post by Scott Tschirhart »

I also use a little red axle grease.
User avatar
2ndovc
Advanced Levergunner
Posts: 9453
Joined: Fri Sep 07, 2007 11:59 am
Location: OH, South Shore of Lake Erie

Re: Breaking in the S&W 442

Post by 2ndovc »

It's not a matter of "Waiting". I'll go through 200 rounds before the new spring gets here. Wanted to see if it made any difference, all there was to it.

Scott,
I already had the Wilson spring in my cart at Midway. :D

jb 8)
jasonB " Another Dirty Yankee"


" Tomorrow the sun will rise. Who knows what the tide could bring?"
User avatar
horsesoldier03
Advanced Levergunner
Posts: 2107
Joined: Sat Sep 08, 2007 7:32 pm
Location: Kansas

Re: Breaking in the S&W 442

Post by horsesoldier03 »

Gun Control is not about guns, it is about control!
Post Reply