Zero 130 gr. FMJ Question

Welcome to the Leverguns.Com Forum. This is a high-class place so act respectable. We discuss most anything here ... politely.

Moderators: AmBraCol, Hobie

Forum rules
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.

Please post political post in the new Politics forum.
Post Reply
milton
Levergunner 2.0
Posts: 352
Joined: Thu Aug 07, 2008 3:37 pm

Zero 130 gr. FMJ Question

Post by milton »

Anyone here tried the Zero 130 gr FMJ bullet in their .357 Rossi lever gun? Just curious
"Knowledge without understanding is a dangerous thing. For a little knowledge entices us to walk its path, a bit more provides the foundation on which we take our stand, and a sufficient amount can erect a wall of knowledge around us, trapping us in our own ignorance."
User avatar
GunnyMack
Advanced Levergunner
Posts: 10702
Joined: Mon Sep 19, 2016 7:57 am
Location: Not where I want to be!

Re: Zero 130 gr. FMJ Question

Post by GunnyMack »

Is it a true FMJ or plated ? I tried some plated in my 41 Henry, the plating did not survive full house loads and fouled something fierce.
BROWN LABS MATTER !!
milton
Levergunner 2.0
Posts: 352
Joined: Thu Aug 07, 2008 3:37 pm

Re: Zero 130 gr. FMJ Question

Post by milton »

This is a real FMJ ,at least in comparison to a HP.I am not sure how thick the jacket is but it is not plated.
"Knowledge without understanding is a dangerous thing. For a little knowledge entices us to walk its path, a bit more provides the foundation on which we take our stand, and a sufficient amount can erect a wall of knowledge around us, trapping us in our own ignorance."
User avatar
COSteve
Advanced Levergunner
Posts: 3967
Joined: Sun Jul 12, 2009 4:03 pm

Done

Post by COSteve »

Done
Last edited by COSteve on Sat Jan 16, 2021 6:08 pm, edited 1 time in total.
Steve
Retired and Living the Good Life
No Matter Where You Go, There You Are
milton
Levergunner 2.0
Posts: 352
Joined: Thu Aug 07, 2008 3:37 pm

Re: Zero 130 gr. FMJ Question

Post by milton »

Thank you! What powder are you using with the 158 gr. bullets and what sort of accuracy are you getting?
"Knowledge without understanding is a dangerous thing. For a little knowledge entices us to walk its path, a bit more provides the foundation on which we take our stand, and a sufficient amount can erect a wall of knowledge around us, trapping us in our own ignorance."
User avatar
COSteve
Advanced Levergunner
Posts: 3967
Joined: Sun Jul 12, 2009 4:03 pm

Done

Post by COSteve »

Done
Last edited by COSteve on Sat Jan 16, 2021 6:09 pm, edited 1 time in total.
Steve
Retired and Living the Good Life
No Matter Where You Go, There You Are
milton
Levergunner 2.0
Posts: 352
Joined: Thu Aug 07, 2008 3:37 pm

Re: Zero 130 gr. FMJ Question

Post by milton »

Thank you very much! I do understand enjoying shooting reactive targets,I like to shoot at steel plates at 100 yds,that is as long as the range allows.
I have used 2400 and 296 and if I can find some I will try the Lil'Gun.
"Knowledge without understanding is a dangerous thing. For a little knowledge entices us to walk its path, a bit more provides the foundation on which we take our stand, and a sufficient amount can erect a wall of knowledge around us, trapping us in our own ignorance."
Post Reply