PAY IT FORWARD

Elkhunter1 · Post by **Elkhunter1** » Thu May 15, 2008 10:31 am

jeff -

I may have a set of rings lying around also and will check today should you need them. I also hade a bushnell variable power collecting dust and I can't for the life of me remember if I still have it. I'll do some rummaging around.

oldmax · Post by **oldmax** » Thu May 15, 2008 11:16 am

JeffG: Take your pick, One with a scope sounds like a better deal

I won't feel slighted

It's yours if you want it, up to you

Can't have both though

Post by **Hobie** » Thu May 15, 2008 11:43 am

I have a set of Lee .35 Rem dies. Please PM me.

Elkhunter1 · Post by **Elkhunter1** » Thu May 15, 2008 12:36 pm

Jeff / Max -

Let me confirm what I have before you make your decision, I would hate to promise something wihtout having in hand. I know where the rings are, but that darn scopes location escapes me. I'l ot later tonight what I find.

JeffG · Post by **JeffG** » Thu May 15, 2008 1:59 pm

....I'm holding my breath here, it's good practice for using my target rifle, but I'll sneak in a breath while I'm waiting to hear from you both.

oldmax · Post by **oldmax** » Thu May 15, 2008 2:39 pm

Jeff, Hang loose for Elkhunter , if anyone else requests the mount there's 2 available: we can sort out who gets what..

Elkhunter1 · Post by **Elkhunter1** » Thu May 15, 2008 8:31 pm

Jeff - Take Old Max's offer. i can only find the Weaver Rings. The scope is gone to the great unknown.

i will offer up the rings though if someone wats them. Weaver style 1" tube.

oldmax · Post by **oldmax** » Fri May 16, 2008 8:07 am

Jeff there yours if you want them, PM address

dajudge43 · Post by **dajudge43** » Fri May 16, 2008 9:58 am

If somebody has a set of rings, I would like to have them, just starting to set up a .22 rifle...

505stevec · Post by **505stevec** » Fri May 16, 2008 1:31 pm

Hobie, unless someone else has taken them I will take the 35 Rem dies.

I will post later this evening something to give.

Man O man what a great thing we got going here!!!

Post by **Hobie** » Fri May 16, 2008 3:03 pm

Hobie wrote:I have a set of Lee .35 Rem dies. Please PM me.

Gone to 505SteveC!

Marlin .35 · Post by **Marlin .35** » Fri May 16, 2008 9:10 pm

Holster arrived today. Thank you very much!!!!! Art

Marlin .35 · Post by **Marlin .35** » Fri May 16, 2008 9:11 pm

Thanks above for bsa ride!!!!

dajudge43 · Post by **dajudge43** » Sat May 17, 2008 2:59 pm

Would like to have that other gerber folder, have sent PM, thanks, will put forward a small led flashlight

505stevec · Post by **505stevec** » Sat May 17, 2008 8:32 pm

Wow, I had a hard time finding something I wanted to part with.

Up is a

1. DVD of Culpepper Cattle Co. (Good movie)

1. AK-74 Mag for .223. It will not fit the 5.45x39 gun

1 H&R 22mag magazine.

1. Bersa .380 7 round mag.

Marlin .35 · Post by **Marlin .35** » Sun May 18, 2008 1:37 pm

505stevc, I will take the Bersa, 7shot .380 Magazine. I will sent you a PM! Thanks!!

I am putting up a LYMAN die set for the 9mm Lugere. In a black box, it consists of the sizer/decapper, neck expanding die, seating die, and a taper crimp die. This is a Tubgston Carbide resizing die.

oldmax · Post by **oldmax** » Sun May 18, 2008 2:02 pm

Redfield rings GONE to Jeffg ( well going Monday )...

Mtnfolk75 · Post by **Mtnfolk75** » Sun May 18, 2008 2:08 pm

Marlin .35,
I will call dibs on the Lyman 9mm die set. I have already done four or five of these but will post something else if I need to.

Thanks,

P.S. PM inbound

Marlin .35 · Post by **Marlin .35** » Sun May 18, 2008 2:29 pm

The dies are yours, will sent out the first of the week!!! Art

Mtnfolk75 · Post by **Mtnfolk75** » Sun May 18, 2008 3:45 pm

Thanks Art, I will PM when they arrive.

Dusty ( Mtnfolk75 )

505stevec · Post by **505stevec** » Sun May 18, 2008 5:46 pm

Marlin .35 wrote:505stevc, I will take the Bersa, 7shot .380 Magazine. I will sent you a PM! Thanks!!

I am putting up a LYMAN die set for the 9mm Lugere. In a black box, it consists of the sizer/decapper, neck expanding die, seating die, and a taper crimp die. This is a Tubgston Carbide resizing die.

Marlin 35 has the Bersa Mag. I am out of town for the week so I will ship when I get back. have a good one.

Old Ironsights · Post by **Old Ironsights** » Mon May 19, 2008 8:54 pm

Full Flap Holster for 7-1/2" revolver:

If anyone has one, I'm looking for a field rig for my .22 Hi Standard Delux.

rjohns94 · Post by **rjohns94** » Mon May 19, 2008 9:26 pm

If the flap holster is available, I would like to call dibs. I will offer up 7mm TCU die set.

Old Ironsights · Post by **Old Ironsights** » Mon May 19, 2008 9:58 pm

rjohns94 wrote:If the flap holster is available, I would like to call dibs. I will offer up 7mm TCU die set.

That was fast.

Pm your addy and I'll drop it in the Post tomorrow.

Edit: Shipped USPS PM.

44/40 · Post by **44/40** » Tue May 20, 2008 12:07 am

505stevec - Rosewood grips arrived today Steve - THANKS

Elkhunter1 · Post by **Elkhunter1** » Tue May 20, 2008 10:16 am

The bullet molds from my previous post are back up for grabs. They had been dibbed by dajudge, but as I have not gotten an address and I see where he has claimed about 4-5 things here recently and offered up just 1, I think it's fair to share the bounty.

If anyone has a problem with this, post your reply and I'll respond in kind.

Elkhunter1 · Post by **Elkhunter1** » Tue May 20, 2008 3:22 pm

dajudge has contacted me via PM and alerted me that he has in fact posted several items on the board. In addition, he has only recieved 2 of the items he has requested.

I will send him the mold, but I still need his address.

budliteguy · Post by **budliteguy** » Tue May 20, 2008 5:00 pm

Dajudge43 and Yance got the Gerber Knives, Will be shipped Saturday, my only free day. I still have the .308 CEMTE 20 round mags, I think They fit a H&K 91 too. If anyone wants them send me a PM. With your address.

alnitak · Post by **alnitak** » Tue May 20, 2008 5:35 pm

Mtnfolk and Blackhawk -- Just wanted to let you know that your "custom-made" bracelets are on their way to you both. Sorry it took a few days -- just had to find the time to sit down and make a couple. Let me know if it doesn't fit.

Mklwhite -- Still working on your hat band. I had to buy some more OD paracord (since a hatband the size you measured takes about 3 1/2 times the cord of a bracelet), and am waiting for it to arrive. I'll probably have it out to you by the end of the week.

Take care.
Bruce

dajudge43 · Post by **dajudge43** » Tue May 20, 2008 7:15 pm

I'll offer up this ram prime manufactured by Lee, but will fit any make of press, received it in a box that came on a trade...Just don't need it anymore...first I'll take it..pm your address

Mtnfolk75 · Post by **Mtnfolk75** » Tue May 20, 2008 10:30 pm

alnitak,
I will PM when it arrives.

Thanks again, Dusty ( Mtnfolk75 )

Travis Morgan · Post by **Travis Morgan** » Wed May 21, 2008 12:53 am

Anyone gotta spare set of Lyman handles for a single cavity?

mklwhite · Post by **mklwhite** » Wed May 21, 2008 7:07 am

alnitak wrote: Mklwhite -- Still working on your hat band. I had to buy some more OD paracord (since a hatband the size you measured takes about 3 1/2 times the cord of a bracelet), and am waiting for it to arrive. I'll probably have it out to you by the end of the week.

Take care.
Bruce

Just so everyone knows about the hatband I wrote alnitak (Bruce) asking if he ever made one the size of a hatband. A while back I had read about a guy who was making them. I had wanted one, but could no longer find the site that had them. Upon hearing this Bruce said he would give it a try. That is above and beyond what he offered, but there you have it. Good guy in my book.

Marlin .35 · Post by **Marlin .35** » Wed May 21, 2008 7:59 pm

Mailed out your dies this morning. Art

rjohns94 · Post by **rjohns94** » Wed May 21, 2008 8:07 pm

I have had many dealings with Alnitak and I can tell you that he is a man of his word and than more so. I have never met a more generous person. I'd ride the river with him anyday, anytime.

Mtnfolk75 · Post by **Mtnfolk75** » Thu May 22, 2008 12:28 am

Marlin .35,
Thanks, I will PM when they get here.

Mtnfolk75

Elkhunter1 · Post by **Elkhunter1** » Thu May 22, 2008 8:35 am

Is their any leather (holsters) left on the board? I tried to go back and look but man what a thread we've got here.

I'm looking for something for a vaquero 4 5/8"

Travis Morgan · Post by **Travis Morgan** » Thu May 22, 2008 8:54 am

Well, I have some for SALE...

Elkhunter1 · Post by **Elkhunter1** » Thu May 22, 2008 9:54 am

Could you send me some pics via PM?

rjohns94 · Post by **rjohns94** » Thu May 22, 2008 4:39 pm

OI, thanks for the holster. it arrived today. I also will enjoy the pocket constitution. Blessings brother.

m

Old Ironsights · Post by **Old Ironsights** » Thu May 22, 2008 5:21 pm

rjohns94 wrote:OI, thanks for the holster. it arrived today. I also will enjoy the pocket constitution. Blessings brother. m

No sweat.

More Stuff:

Weaver Mount and Grub Screws. Don't know the radius.

JeffG · Post by **JeffG** » Thu May 22, 2008 6:03 pm

Oldmax,

The base and rings arrived today, Thanks!...just when I was worried I'd have nothing to do this weekend!! Seeya at the range!

Thankyou, JeffG

oldmax · Post by **oldmax** » Thu May 22, 2008 6:58 pm

Your welcome, Good shooting, Hope they fit...

alnitak · Post by **alnitak** » Fri May 23, 2008 12:12 pm

505Stevec -- Just wanted to let you know I got a chance to get by the P.O. yesterday and picked up the Mini-14 mags.

Thanks! Take care.
Bruce

dajudge43 · Post by **dajudge43** » Sun May 25, 2008 7:35 pm

No body wants the Ram Prime, how about a partial box of Hornady 6mm 58 grain v-max moly coated bullets, Hornady # being 24113, or almost full box of Hornady 7.62 cal, 123 grain bullets, Hornady # being 3140

Travis Morgan · Post by **Travis Morgan** » Sun May 25, 2008 8:02 pm

Judge,

I could use the 7.62's, IF nobody speaks up for them soon. Anything you could use?

Guys, I'll be shipping out the stuff I promised this week. Been awful busy, getting ready to go in for spinal fusion on Thursday.

dajudge43 · Post by **dajudge43** » Mon May 26, 2008 10:40 am

Sent you a pm--anybody for the 6mm---Oh yes, received the bullet molds from Elkhunter1, he didn't fib, these are brand new--will try them tonight, thanks a lot.....

41 Redhawk · Post by **41 Redhawk** » Tue May 27, 2008 11:49 am

rjohns94,

I'll call dibs on the 7TC/U dies PM to follow

I offer a left handed High Noon Sky High holster for a Taurus PT145 (non-Pro). This is a paddle holster so it could be switched to RH easily if you don't mind the stampings being on the "wrong" side. High Noon told me that the PT145 Pro would be a tight fit in this holster but that it might stretch to accomodate it.

Thanks

rjohns94 · Post by **rjohns94** » Thu May 29, 2008 7:46 pm

41 Redhawk - the dies are on their way to you in am.

Trailsman · Post by **Trailsman** » Mon Jun 02, 2008 7:13 am

44/40 wrote:Almost forgot after jumping on the other set of 9mm dies -
Offering up a lightly used Lee Collet sizing die set for 6.5X55 Swede.

I would like to call dibs on your dies if you still have them .

PAY IT FORWARD

POST SUBJECT

bsaride

Holster

POST SUBJECT

Bersa .380 magazine

Pay It Forward ......

Re: Bersa .380 magazine

Re: Paracord Bracelet

Ram Prime for Lee Press

Pay It Forward ......

Re: Paracord Bracelet

Mtnfolk754

Pay It Forward ......

Win 75 base and rings

Post Subject

6.5x55 Sweed Dies