Got the beast home/ it's Alive!
Forum rules
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
- 2ndovc
- Advanced Levergunner
- Posts: 9356
- Joined: Fri Sep 07, 2007 11:59 am
- Location: OH, South Shore of Lake Erie
Got the beast home/ it's Alive!
got the Sportster home yesterday. Picked up a new battery today, it's on the charger now.
We'll see if it starts tomorrow.
Ignore all the furniture, I've had my mom's stuff in storage for over a year. The garage is finally done so I was tired of paying $200/ mo to keep it somewhere else.
jb
We'll see if it starts tomorrow.
Ignore all the furniture, I've had my mom's stuff in storage for over a year. The garage is finally done so I was tired of paying $200/ mo to keep it somewhere else.
jb
Last edited by 2ndovc on Sun Jul 14, 2019 4:24 pm, edited 1 time in total.
jasonB " Another Dirty Yankee"
" Tomorrow the sun will rise. Who knows what the tide could bring?"
" Tomorrow the sun will rise. Who knows what the tide could bring?"
Re: Got the beast home
Last edited by Pitchy on Sun Jul 07, 2019 6:11 am, edited 1 time in total.
Because I Can, and Have
-------------------------------------------------------------
USAF-72-76
God Bless America.
Disclaimer, not responsible for anyone copying or building anything i make.
Always consult an expert first.
-------------------------------------------------------------
USAF-72-76
God Bless America.
Disclaimer, not responsible for anyone copying or building anything i make.
Always consult an expert first.
Re: Got the beast home
The furniture's OK - we've seen more than a few hog riders who keep their bikes in their living room...……
.
-
- Advanced Levergunner
- Posts: 4296
- Joined: Wed Sep 15, 2010 12:57 pm
- Location: Vinita, I.T.
Re: Got the beast home
You might want to put a drip pan under it just in case it decides to mark it's spot. Especially after it's been sitting for so long. Be sure it's full of 50 wt. before you start it. Good luck.
M. M. Wright, Sheriff, Green county Arkansas (1860)
Currently living my eternal life.
NRA Life
SASS
ITSASS
Currently living my eternal life.
NRA Life
SASS
ITSASS
- 2ndovc
- Advanced Levergunner
- Posts: 9356
- Joined: Fri Sep 07, 2007 11:59 am
- Location: OH, South Shore of Lake Erie
Re: Got the beast home
Thanks Pete, that's funny.
Great idea Mr. Wright, I should have thought of that.
jb
Great idea Mr. Wright, I should have thought of that.
jb
jasonB " Another Dirty Yankee"
" Tomorrow the sun will rise. Who knows what the tide could bring?"
" Tomorrow the sun will rise. Who knows what the tide could bring?"
Re: Got the beast home
Depending where, and how long it's sat, I would.....
Put a few drops of Marvels in the cylinders. While it sat, I would drain any fuel, flush the tank, pull the petcock and clean it and the screen.
Pull the carb and clean thoroughly.
Check the brake calipers for free movement.
Drain the oils for an extended time, then replace with the lightest synthetic thats recommended. New filter, also.
Make sure no mice, etc, are in the exhaust.
Try a start after reassembling and fresh fuel. If she starts, let it idle for a minute or so. Pump the clutch a few times and make sure it isn't sticking. If everything seems ok , add some Seafoam and run it some more for a little longer intervals. Once it's been run a while at full temp, drain all the oils and replace with a new filter.
Replace the tires before riding on the road! They degrade with age.
It will/may leak oil from several places. I would give it a while and keep wiping it off. A good many times, dried gaskets will "heal" and mostly seal up. I've seen it more than once. May.......may not.
Sorry so long winded, but it's a cool old Sporty and should be saved.
Put a few drops of Marvels in the cylinders. While it sat, I would drain any fuel, flush the tank, pull the petcock and clean it and the screen.
Pull the carb and clean thoroughly.
Check the brake calipers for free movement.
Drain the oils for an extended time, then replace with the lightest synthetic thats recommended. New filter, also.
Make sure no mice, etc, are in the exhaust.
Try a start after reassembling and fresh fuel. If she starts, let it idle for a minute or so. Pump the clutch a few times and make sure it isn't sticking. If everything seems ok , add some Seafoam and run it some more for a little longer intervals. Once it's been run a while at full temp, drain all the oils and replace with a new filter.
Replace the tires before riding on the road! They degrade with age.
It will/may leak oil from several places. I would give it a while and keep wiping it off. A good many times, dried gaskets will "heal" and mostly seal up. I've seen it more than once. May.......may not.
Sorry so long winded, but it's a cool old Sporty and should be saved.
"Oh bother", said Pooh, as he chambered another round.
- marlinman93
- Advanced Levergunner
- Posts: 6492
- Joined: Sun Apr 01, 2007 3:40 pm
- Location: Oregon
Re: Got the beast home
Always appreciated the Sportsters over the larger Harleys. More nimble, and fun to me.
Pre WWI Marlins and Singleshot rifles!
http://members.tripod.com/~OregonArmsCollectors/
http://members.tripod.com/~OregonArmsCollectors/
-
- Senior Levergunner
- Posts: 1431
- Joined: Sat Jan 01, 2011 2:42 am
- Location: mechanicsville, md.
Re: Got the beast home
I like sportsters also, just too light suspension for me (250 lbs) I drive a 2013 superglide.
Rossi 92 .357 lever , and a cz pcr 9mm
Henry .22 lever, Remington speedmaster 552 .22 lr
Marlin Glenfield .22 boltaction
gforce 12ga semi
Taylor's Tactical 1911 A1 FS in .45acp
winchester 1873 44.40
Marlin 336W .30.30
beeman sportsman rs2 dual caliber pellet rifle
henry .22 magnum pumpaction/octagon barrel
stag 5.56 m4 with reddot
Henry .22 lever, Remington speedmaster 552 .22 lr
Marlin Glenfield .22 boltaction
gforce 12ga semi
Taylor's Tactical 1911 A1 FS in .45acp
winchester 1873 44.40
Marlin 336W .30.30
beeman sportsman rs2 dual caliber pellet rifle
henry .22 magnum pumpaction/octagon barrel
stag 5.56 m4 with reddot
- 2ndovc
- Advanced Levergunner
- Posts: 9356
- Joined: Fri Sep 07, 2007 11:59 am
- Location: OH, South Shore of Lake Erie
Re: Got the beast home
Dude,OldWin wrote: ↑Sun Jul 07, 2019 7:54 am Depending where, and how long it's sat, I would.....
Put a few drops of Marvels in the cylinders. While it sat, I would drain any fuel, flush the tank, pull the petcock and clean it and the screen.
Pull the carb and clean thoroughly.
Check the brake calipers for free movement.
Drain the oils for an extended time, then replace with the lightest synthetic thats recommended. New filter, also.
Make sure no mice, etc, are in the exhaust.
Try a start after reassembling and fresh fuel. If she starts, let it idle for a minute or so. Pump the clutch a few times and make sure it isn't sticking. If everything seems ok , add some Seafoam and run it some more for a little longer intervals. Once it's been run a while at full temp, drain all the oils and replace with a new filter.
Replace the tires before riding on the road! They degrade with age.
It will/may leak oil from several places. I would give it a while and keep wiping it off. A good many times, dried gaskets will "heal" and mostly seal up. I've seen it more than once. May.......may not.
Sorry so long winded, but it's a cool old Sporty and should be saved.
I can't even get the right battery for this stupid thing! The first one was too big. Took it back, guy gave me one ( for another $45) and the terminals were reversed!
Used to take me 10 minutes max, to change out a battery on one of my Kaw's or Hondas! The way this is set up is just dumb. Why in the F are the terminals on the back and you need baby hands to get in there???
I finally gave up and went to work on a plumbing issue that Bubbles wanted me to fix. Almost flooded the basement! And that's something I'm supposed to know how to do. I gave up for the day!!
I'll take another run at the Sportster, but I'm really thinking we would get a whole lot more use and fun out of a new fourwheeler!
jb
jasonB " Another Dirty Yankee"
" Tomorrow the sun will rise. Who knows what the tide could bring?"
" Tomorrow the sun will rise. Who knows what the tide could bring?"
Re: Got the beast home
It`s a Harley what could go wrong, i`ll say again.
Ya either like them or hate them, if ya hate them sell and go foreign.
Ya either like them or hate them, if ya hate them sell and go foreign.
Because I Can, and Have
-------------------------------------------------------------
USAF-72-76
God Bless America.
Disclaimer, not responsible for anyone copying or building anything i make.
Always consult an expert first.
-------------------------------------------------------------
USAF-72-76
God Bless America.
Disclaimer, not responsible for anyone copying or building anything i make.
Always consult an expert first.
Re: Got the beast home
You should be able to find what battery fits online.
Even if you'd rather a four wheeler, you can get more for the Sportster if it's up and running.
Even if you'd rather a four wheeler, you can get more for the Sportster if it's up and running.
"Oh bother", said Pooh, as he chambered another round.
- 2ndovc
- Advanced Levergunner
- Posts: 9356
- Joined: Fri Sep 07, 2007 11:59 am
- Location: OH, South Shore of Lake Erie
Re: Got the beast home
Lenn, thanks for the laugh again!
I'll get this thing running, it's just been one of those weekends. Was about to drag it out back an turn the canon loose on it!!!
Bubbles and the boys think a 4 wheeler would be the Bomb. A friend of mine is gonna have one of his guys stop by and help out.
We'll see what happens,
jb
I'll get this thing running, it's just been one of those weekends. Was about to drag it out back an turn the canon loose on it!!!
Bubbles and the boys think a 4 wheeler would be the Bomb. A friend of mine is gonna have one of his guys stop by and help out.
We'll see what happens,
jb
jasonB " Another Dirty Yankee"
" Tomorrow the sun will rise. Who knows what the tide could bring?"
" Tomorrow the sun will rise. Who knows what the tide could bring?"
Re: Got the beast home
Been riding Harleys for 45 years plus its blood sweat and tears ya gotta like to work on them though the new ones are some what trouble free.
Get er started take it for a ride and you`ll either love it or not and go from there, the thing about Harleys is they get in your blood and then there`s no turning back.
I`ve learned a lot of cuss words with Harleys but hope to die owning one and thinking i will but a biker is a biker to me no matter what he or she rides.
Get er started take it for a ride and you`ll either love it or not and go from there, the thing about Harleys is they get in your blood and then there`s no turning back.
I`ve learned a lot of cuss words with Harleys but hope to die owning one and thinking i will but a biker is a biker to me no matter what he or she rides.
Because I Can, and Have
-------------------------------------------------------------
USAF-72-76
God Bless America.
Disclaimer, not responsible for anyone copying or building anything i make.
Always consult an expert first.
-------------------------------------------------------------
USAF-72-76
God Bless America.
Disclaimer, not responsible for anyone copying or building anything i make.
Always consult an expert first.
- 2ndovc
- Advanced Levergunner
- Posts: 9356
- Joined: Fri Sep 07, 2007 11:59 am
- Location: OH, South Shore of Lake Erie
Re: Got the beast home
One of those things, I guess.
I'll get it running and go from there. It's all good!
jb
jasonB " Another Dirty Yankee"
" Tomorrow the sun will rise. Who knows what the tide could bring?"
" Tomorrow the sun will rise. Who knows what the tide could bring?"
- 2ndovc
- Advanced Levergunner
- Posts: 9356
- Joined: Fri Sep 07, 2007 11:59 am
- Location: OH, South Shore of Lake Erie
Re: Got the beast home/ it's alive!
Finally got it started!
Three different batteries and multiple trips to the parts store to get one that fit and had the terminals on the right ends. A nice lady at an Auto Zone actually knew what I needed and helped me get the right one. Fired right up and it's been sitting for 5 years. Took it for a spin around the neighborhood for bit. Haven't been on a bike for 7-8 years, funny how it comes back to you so quickly. The one thing that threw me off was the foot pegs and controls are much farther forward than I'm used to as a dirt bike/ Dual Sport guy. Still don't know what to do with it, it's too small for me but it was still fun.
jb
Three different batteries and multiple trips to the parts store to get one that fit and had the terminals on the right ends. A nice lady at an Auto Zone actually knew what I needed and helped me get the right one. Fired right up and it's been sitting for 5 years. Took it for a spin around the neighborhood for bit. Haven't been on a bike for 7-8 years, funny how it comes back to you so quickly. The one thing that threw me off was the foot pegs and controls are much farther forward than I'm used to as a dirt bike/ Dual Sport guy. Still don't know what to do with it, it's too small for me but it was still fun.
jb
jasonB " Another Dirty Yankee"
" Tomorrow the sun will rise. Who knows what the tide could bring?"
" Tomorrow the sun will rise. Who knows what the tide could bring?"
Re: Got the beast home/ it's Alive!
Cool glad she run good, should bring about 3,500.
Because I Can, and Have
-------------------------------------------------------------
USAF-72-76
God Bless America.
Disclaimer, not responsible for anyone copying or building anything i make.
Always consult an expert first.
-------------------------------------------------------------
USAF-72-76
God Bless America.
Disclaimer, not responsible for anyone copying or building anything i make.
Always consult an expert first.
-
- Advanced Levergunner
- Posts: 4145
- Joined: Fri Dec 21, 2007 11:34 am
- Location: north of Palacios about 1400 miles
Re: Got the beast home/ it's Alive!
Sell it and buy more guns.
30/30 Winchester: Not accurate enough fer varmints, barely adequate for small deer; BUT In a 10" to 14" barrelled pistol; is good for moose/elk to 200 yards; ground squirrels to 300 metres
250 Savage... its what the 223 wishes it could be...!
250 Savage... its what the 223 wishes it could be...!
- 2ndovc
- Advanced Levergunner
- Posts: 9356
- Joined: Fri Sep 07, 2007 11:59 am
- Location: OH, South Shore of Lake Erie
Re: Got the beast home/ it's Alive!
That's funny, first thing my dad said was sell it and buy more Colts!
I was thinking about a new 4 wheeler. Going to think on it awhile. It's just loud enough to annoy the neighbors.
jb
I was thinking about a new 4 wheeler. Going to think on it awhile. It's just loud enough to annoy the neighbors.
jb
jasonB " Another Dirty Yankee"
" Tomorrow the sun will rise. Who knows what the tide could bring?"
" Tomorrow the sun will rise. Who knows what the tide could bring?"
Re: Got the beast home/ it's Alive!
Nice! Glad she's up and running.
"Oh bother", said Pooh, as he chambered another round.
Re: Got the beast home/ it's Alive!
It would probably not feel as small if it had regular risers instead of the slight [pullback risers, and if it had handlebars that didnt come back as far. Thats one of the things thats nice about the H-Ds, they are really easy to change so many things and theres a LOT of parts variety available. I find good stuff at shops for pretty cheap just by asking about used parts, specific things or just general stuff.
"Far better it is to dare mighty things, to win glorious triumphs even though checkered by failure, than to rank with those poor spirits who neither enjoy nor suffer much because they live in the gray twilight that knows neither victory nor defeat." -Theodore Roosevelt-
Isnt it amazing how many people post without reading the thread?
Isnt it amazing how many people post without reading the thread?
-
- Advanced Levergunner
- Posts: 4145
- Joined: Fri Dec 21, 2007 11:34 am
- Location: north of Palacios about 1400 miles
Re: Got the beast home/ it's Alive!
A first generation in 38wcf followed closely by a 32wcf. Anither one i would love to fondle is a King Conversion Colt. A 2nd generation in 38 special would really appeal to me too. A M92 or 1873 in 38wcf would also be hard to pass up.
30/30 Winchester: Not accurate enough fer varmints, barely adequate for small deer; BUT In a 10" to 14" barrelled pistol; is good for moose/elk to 200 yards; ground squirrels to 300 metres
250 Savage... its what the 223 wishes it could be...!
250 Savage... its what the 223 wishes it could be...!
Re: Got the beast home/ it's Alive!
Yup! The 38-40 is a great cartridge. I don't have an SAA chambered for it, but have several Winchesters and an an 1889 Marlin.
"Oh bother", said Pooh, as he chambered another round.
- 2ndovc
- Advanced Levergunner
- Posts: 9356
- Joined: Fri Sep 07, 2007 11:59 am
- Location: OH, South Shore of Lake Erie
Re: Got the beast home/ it's Alive!
You are right. I'm used to wide, kinda straight handlebars and these just feel weird. My brother in law is a tiny guy, honestly not sure how he could even ride this thing but he did. Still thinking about what to do with it. It's not going anywhere soon, and not taking up much space so I'll keep fooling with it. Still really impressed how quickly I got it fired up and out for a couple short rides.Malamute wrote: ↑Mon Jul 15, 2019 10:32 am It would probably not feel as small if it had regular risers instead of the slight [pullback risers, and if it had handlebars that didnt come back as far. Thats one of the things thats nice about the H-Ds, they are really easy to change so many things and theres a LOT of parts variety available. I find good stuff at shops for pretty cheap just by asking about used parts, specific things or just general stuff.
Still, a nice SAA would be a lot of fun too!!
jb
jasonB " Another Dirty Yankee"
" Tomorrow the sun will rise. Who knows what the tide could bring?"
" Tomorrow the sun will rise. Who knows what the tide could bring?"
Re: Got the beast home/ it's Alive!
Like Malamute said, a set of drag bars with a straight 4" riser would do wonders. A seat change can help, also.
Plus, it'll look cooler. But, I may be biased.
Plus, it'll look cooler. But, I may be biased.
"Oh bother", said Pooh, as he chambered another round.
Re: Got the beast home/ it's Alive!
The factory pullback risers that are on the bike with drag bars might be good. Its what I have and like quite a lot. Its about perfect for riding position for me, upright without leaning forward too much. It can probably be done without changing any cables or wires.
If theres any dealers or independent shops around, you might ask if they have any used drag bars to try. Last used bars I bought were $10 I think. You need the ones that are dimpled for the wires.
If theres any dealers or independent shops around, you might ask if they have any used drag bars to try. Last used bars I bought were $10 I think. You need the ones that are dimpled for the wires.
"Far better it is to dare mighty things, to win glorious triumphs even though checkered by failure, than to rank with those poor spirits who neither enjoy nor suffer much because they live in the gray twilight that knows neither victory nor defeat." -Theodore Roosevelt-
Isnt it amazing how many people post without reading the thread?
Isnt it amazing how many people post without reading the thread?
Re: Got the beast home/ it's Alive!
Mice in the exhaust? I'd pay to see that get cleaned out. LOL
If you're gonna be stupid ya gotta be tough-
Isiah 55:8&9
It's easier to fool people than it is to convince them they have been fooled.
Isiah 55:8&9
It's easier to fool people than it is to convince them they have been fooled.
- 2ndovc
- Advanced Levergunner
- Posts: 9356
- Joined: Fri Sep 07, 2007 11:59 am
- Location: OH, South Shore of Lake Erie
Re: Got the beast home/ it's Alive!
There are a few non-Harley, Harley bike shops around. Great suggestion.Malamute wrote: ↑Tue Jul 16, 2019 9:41 am The factory pullback risers that are on the bike with drag bars might be good. Its what I have and like quite a lot. Its about perfect for riding position for me, upright without leaning forward too much. It can probably be done without changing any cables or wires.
If theres any dealers or independent shops around, you might ask if they have any used drag bars to try. Last used bars I bought were $10 I think. You need the ones that are dimpled for the wires.
Jay, nice lookin' wheels!
jb
jasonB " Another Dirty Yankee"
" Tomorrow the sun will rise. Who knows what the tide could bring?"
" Tomorrow the sun will rise. Who knows what the tide could bring?"
Re: Got the beast home/ it's Alive!
Thanks buddy.
Ebay is full of used Harley parts too. Some good deals now as the market is flooded.
Ebay is full of used Harley parts too. Some good deals now as the market is flooded.
"Oh bother", said Pooh, as he chambered another round.