PAY IT FORWARD

JeffG · Post by **JeffG** » Wed May 07, 2008 5:40 am

OK Meanc,
lay them out the way you want them to sit in a box and take a photo, or better yet, trace them on a piece of roll-up paper and send it to me.
...and "Levers" thanks for watching out for me. Building a box feels like a good thing that I can "pay forward"...I want to encourage this kind of trading...it's good for the Heart.

"it's the mind that creates the abyss, it's the Heart that crosses it"
- Thornton Wilder

Blackhawk · Post by **Blackhawk** » Wed May 07, 2008 10:52 am

Ruger Blackhawk grips, stock. Came off my 45 Colt. -- Travis
Lee factory powder scale. -- Jeff

Found grips and scale last night gentlemen, will ship them out to both of you tomorrow. I'm with out a ride today and can't get to the Post office.

Johnny

meanc · Post by **meanc** » Wed May 07, 2008 1:36 pm

JeffG

Thanks for giving me the chance at it, I surely appreciate it. But, I'll let someone else get a shot at this opportunity. I've already gotten a couple of generous offers from this group. Don't want to ruin the spirit of the giving.

budliteguy · Post by **budliteguy** » Wed May 07, 2008 10:07 pm

Putting up a gerber folding lock blade knife to cover holster from Yance.

bsaride · Post by **bsaride** » Thu May 08, 2008 11:53 am

Getting ready to ship dies/scales today.

Either 44/40 or Azoil who are getting my 9mm dies,
First one to speak up gets a 9mm pocket swage die (primer) also. GONE

I also have a small bank bag of 8mm Mauser brass and some bullets available.

Aslo found a Lyman 45 ACP TC size die.

Lifetyme Die 45 ACP die with body and lock ring only. GONE

Last is a 257 Roberts seater die, looks like CH logo stamp.

Jay

Yance · Post by **Yance** » Thu May 08, 2008 12:01 pm

Dibs on "Lifetyme Die 45 ACP
die with body and lock ring only. "

PM inbound.

azoil · Post by **azoil** » Thu May 08, 2008 12:07 pm

bsaride wrote:Either 44/40 or Azoil who are getting my 9mm dies,
First one to speak up gets a 9mm pocket swage die (primer) also.

You can send it my way bsaride.

AND Thanks again!

bsaride · Post by **bsaride** » Thu May 08, 2008 12:23 pm

You can send it my way bsaride.

AND Thanks again!

DONE!

bsaride · Post by **bsaride** » Thu May 08, 2008 12:28 pm

Yance wrote:Dibs on "Lifetyme Die 45 ACP
die with body and lock ring only. "

PM inbound.

Do you want the size die too?

Yance · Post by **Yance** » Thu May 08, 2008 12:32 pm

bsaride wrote:
Yance wrote:Dibs on "Lifetyme Die 45 ACP
die with body and lock ring only. "

PM inbound.
Do you want the size die too?

Thanks, but no. Just the Lifetyme.

Elkhunter1 · Post by **Elkhunter1** » Thu May 08, 2008 1:04 pm

JeffG

i just took delivery of a new shiloh sharps and would dearly love a case for it if you are really inclined to make one. I have watched this post with awe at how great this concept is.

As for offerings, I have the following;

(1) Lee .45 caliper 2 bullet mold for paper patch bullets. I believe it cast 405 and 530 grain bullets. I bought it new off ebay last year and have never used it, it comes with handles and I will cover shipping and handling.

JeffG · Post by **JeffG** » Thu May 08, 2008 2:45 pm

Elkhunter1
good for you, send me a PM of the dimensions you'd like (leave enough room for your padding), and I'll start on it. Better include your mailing address too.

Travis Morgan · Post by **Travis Morgan** » Thu May 08, 2008 3:27 pm

I sure hope we can keep this deal going! This is pretty cool, the way everyone is so willing to help each other out. Anyone need a left handed holster for their single action? I have one or two laying around.

Also, anyone have an extra set of shotgun sights? I've been looking for some that'll give me a rifle type sight picture.

victor · Post by **victor** » Thu May 08, 2008 5:17 pm

JeffG,
A most awesome offering,good on you.Glad to see someone accept it.

victor · Post by **victor** » Thu May 08, 2008 5:27 pm

For the handloading newbie who lacks some tools I have:

A set of stainless steel Midway dial calipers for that critical COL and i'll toss in
a Lee primer pocket cleaner for large and small primer pockets.going to 505stevec

505stevec · Post by **505stevec** » Thu May 08, 2008 5:33 pm

Victor;

I will take both and much abliged. I am just now getting into reloading and this would be a great help.

I will post later this evening the stuff to pass on.

bsaride · Post by **bsaride** » Thu May 08, 2008 6:30 pm

OK,

Shipments made to the following:

Azoil,
Yance with Tycer insert,
Levers,
44/40

23 1/2 lbs out the door

Jay

azoil · Post by **azoil** » Thu May 08, 2008 6:31 pm

Thanks a bunch Jay!!

Check your email.

bsaride · Post by **bsaride** » Thu May 08, 2008 6:33 pm

OK,

Heads up on the five holsters I still have on pg 6.

These will be on eBay Sunday if not spoken for.

Jay

dajudge43 · Post by **dajudge43** » Thu May 08, 2008 8:57 pm

I have a Engineer brand Lensatic Compass, a copy of the military type, that I will send someone that is in need, possible has a son in the scouts, that may want to work with one of these, I have tested it and it is a good as my old military one....

levers · Post by **levers** » Thu May 08, 2008 9:55 pm

I could use the compass if it's still available. Thanks

levers · Post by **levers** » Thu May 08, 2008 10:13 pm

I'll offer up two magazine tubes. One is off a Winchester 1894 and it is 15.375" long GONE. I'm not sure what the other is off of but it appears to be Winchester 1886 size and it is 21.625" long. GONE Both are old magazines...the 1894 has 4 small notches on the bottom side. The 1886 size mag has no notches.

Hope someone can use them. BOTH GONE

dajudge43 · Post by **dajudge43** » Fri May 09, 2008 11:22 am

I can use that Winchester tube, the short one, I will send you my address!!!PM sent

Elkhunter1 · Post by **Elkhunter1** » Fri May 09, 2008 11:27 am

Bullet Mold to dajudge.

levers · Post by **levers** » Fri May 09, 2008 12:17 pm

Winchester 94 tube to Dajudge

Travis Morgan · Post by **Travis Morgan** » Fri May 09, 2008 1:38 pm

If anyone has some Winchester '94 parts laying around, I'm, trying to rebuild a Buffalo Bill commemorative, and need most of the parts.

levers · Post by **levers** » Fri May 09, 2008 5:21 pm

Thanks Yance...I got the measure today. Looks great!

Marlin .35 · Post by **Marlin .35** » Sat May 10, 2008 4:02 pm

Ok bsaride, I will take the Safarilannd 45 Auto, #4 lined. I will send you a PM!!

I am putting up 2 holsters. I don't have photos yet,(have to buy my card reader).

1.BIANCHI, tan leather, lined, Model#111m for Beretta 92F. Very good condition. Could use a little cleaning.

@. B!ANCHI, black basketweave, not lined, Model 19L/2, for the S&W 645, .45 Auto. Used, but in good condition. Little cleaning necessary.

Art

bsaride · Post by **bsaride** » Sat May 10, 2008 5:02 pm

Marlin .35 wrote:Ok bsaride, I will take the Safarilannd 45 Auto, #4 lined. I will send you a PM!!

I am putting up 2 holsters. I don't have photos yet,(have to buy my card reader).

1.BIANCHI, tan leather, lined, Model#111m for Beretta 92F. Very good condition. Could use a little cleaning.

@. B!ANCHI, black basketweave, not lined, Model 19L/2, for the S&W 645, .45 Auto. Used, but in good condition. Little cleaning necessary.

Art

Done, will ship Monday.
Jay

oldmax · Post by **oldmax** » Sat May 10, 2008 5:11 pm

LEVERS : Loader arrived today, Thanks....

azoil · Post by **azoil** » Sat May 10, 2008 6:30 pm

bsaride,

Dies came today, Thanks again!!

levers · Post by **levers** » Sat May 10, 2008 8:52 pm

BSARIDER
Got the scale and dies/stuff today. They're great. Many thanks.

Travis Morgan · Post by **Travis Morgan** » Sat May 10, 2008 9:16 pm

Guys, will try to ship in the next coupla days. Been down for the last few.

505stevec · Post by **505stevec** » Sat May 10, 2008 10:49 pm

Up for dibbs is:

Two: Mini 14 mags (used) good shape

One set: Rosewood S&W 686 K-frame grips (pretty)GONE to 44-40

Two: Magazines for bolt .22s of unknown make. I can post pictures but it will have to be later.

One: Beersa .380 mag 7 rds (used)

44/40 · Post by **44/40** » Sat May 10, 2008 11:09 pm

Dibs on the K frame rosewood grips Steve. Thanks.
Offering up a set of Pachmayr presentation grips for a Colt D frame (Police Positive, Det. Spl, etc.) square butt.

oldmax · Post by **oldmax** » Sun May 11, 2008 4:58 am

I could use the Mini Mags, BUT I have 2 extras, and will hold off Dibs
and give the Late 'Riser's' a chance,

Besides I'm in the - column. I Need to post something,
Pack Rats have a hard time parting with stuff..

oldmax · Post by **oldmax** » Sun May 11, 2008 6:08 pm

BSA REDDOT .

I got a BSA Red Dot from Amsoil to try on my Blackhawk..
Test Is Complete, It is available again..

Not often you get a second chance!

Yance · Post by **Yance** » Mon May 12, 2008 5:41 am

Got back in last night from the long weekend with my Mom to find the scale &
dies, (THANKS! Jay), and .45 Mag (THANKS Rich) waiting for me.

Thanks again guys.

alnitak · Post by **alnitak** » Mon May 12, 2008 8:47 am

505Stevec -- what capacity are those Mini-14 Mags, and are they metal or plastic?

I've been participating on the TFL PIF thread for a while (have never gotten anything, though have given away stuff. Always seem to be too late -- the "regulars" scarf up the good items quickly), so I don't have much left. But I can offer the following:

1) Ejector housing for a Ruger SA -- It's the factory aluminum one, and it has been stripped of the bluing so it's a silver metallic finish.
2) Brass -- I can offer cleaned and de-primed brass for .357, .38 spl and 9mm. I only have 50 each of the .357 and .38 spl, and 100 of the 9mm.
3) Generic multitool in belt case -- It appears unused, and it's marked "Handyman Club of America". A standard entry model multitool with pliers and seven other tools, including one saw blade. It's not a Leatherman Wave, but handy to throw in the car, fishing box, etc.
4) Paracord bracelet -- I can create a paracord bracelet specifically for you. These bracelets are a convenient way to carry 10-12' of 550 paracord (seven strand), which can readily be available for emergency situations. The strands can also be extracted and used for sutures. fishing line, etc. Here are pictures of a couple I've done:

http://i37.photobucket.com/albums/e99/a ... _1040a.jpg

http://i37.photobucket.com/albums/e99/a ... _1041a.jpg

The first is one I made for my daughter. The second is one I use with an extra layer of paracord, doubling the amount of cord available. Use these when hunting, fishing, camping, etc. or just to wear everyday. I have several colors available, and can make them in one- or two-colors specific to your wrist measurement.

I'll keep looking to see if I can come up with anything else.

Bruce

505stevec · Post by **505stevec** » Mon May 12, 2008 2:19 pm

alnitak wrote:505Stevec -- what capacity are those Mini-14 Mags, and are they metal or plastic?

I've been participating on the TFL PIF thread for a while (have never gotten anything, though have given away stuff. Always seem to be too late -- the "regulars" scarf up the good items quickly), so I don't have much left. But I can offer the following:

1) Ejector housing for a Ruger SA -- It's the factory aluminum one, and it has been stripped of the bluing so it's a silver metallic finish.
2) Brass -- I can offer cleaned and de-primed brass for .357, .38 spl and 9mm. I only have 50 each of the .357 and .38 spl, and 100 of the 9mm.
3) Generic multitool in belt case -- It appears unused, and it's marked "Handyman Club of America". A standard entry model multitool with pliers and seven other tools, including one saw blade. It's not a Leatherman Wave, but handy to throw in the car, fishing box, etc.
4) Paracord bracelet -- I can create a paracord bracelet specifically for you. These bracelets are a convenient way to carry 10-12' of 550 paracord (seven strand), which can readily be available for emergency situations. The strands can also be extracted and used for sutures. fishing line, etc. Here are pictures of a couple I've done:

http://i37.photobucket.com/albums/e99/a ... _1040a.jpg

http://i37.photobucket.com/albums/e99/a ... _1041a.jpg

The first is one I made for my daughter. The second is one I use with an extra layer of paracord, doubling the amount of cord available. Use these when hunting, fishing, camping, etc. or just to wear everyday. I have several colors available, and can make them in one- or two-colors specific to your wrist measurement.

I'll keep looking to see if I can come up with anything else.

Bruce

These are metal magazines. they are aftermarket but unsure of the brand. They worked fine in my Mini-14.

alnitak · Post by **alnitak** » Mon May 12, 2008 3:51 pm

If you don't mind, then 505Stevec, can I claim them? I'll send you a PM with the address.

Thanks.
Bruce

Mtnfolk75 · Post by **Mtnfolk75** » Mon May 12, 2008 4:22 pm

alnitak,
I would be interested in one of your bracelets, what measurement do you need?

I will PM also.

alnitak · Post by **alnitak** » Mon May 12, 2008 5:15 pm

Replied to PM...happy to do it.

505stevec · Post by **505stevec** » Mon May 12, 2008 6:23 pm

alnitak wrote:If you don't mind, then 505Stevec, can I claim them? I'll send you a PM with the address.

Thanks.
Bruce

alnitak has the mini mags pending pm

oldmax · Post by **oldmax** » Tue May 13, 2008 6:07 am

RED DOT GONE

BUDLITEGUY, pm'd for the RED DOT

budliteguy · Post by **budliteguy** » Tue May 13, 2008 1:50 pm

Listing 2 Gerber folding lock blades to cover the Red Dot. Anyone that wants them just PM your address.

44/40 · Post by **44/40** » Tue May 13, 2008 10:55 pm

BSAride - 9mm dies arrived today. Thanks Jay.

Still offering up:
Pachmayr Presentation grips - Colt D frame sq. butt (Det.Spec, Pol.thing.)
Lee Collet sizing die set for 6.5X55 Swede

budliteguy · Post by **budliteguy** » Wed May 14, 2008 1:59 pm

One Gerber To Yance

oldmax · Post by **oldmax** » Wed May 14, 2008 5:03 pm

Scope rings & Base, Redfield No 75

See Post for further info

http://www.levergunscommunity.com/viewt ... 6504#86504

JeffG · Post by **JeffG** » Thu May 15, 2008 6:58 am

Oldmax,
I have a Winchester model 75 that has Lyman apertures on it now...I'd love to try a scope on it. I'd love to get your Redfield bases and rings.
Thanks,
JeffG

PAY IT FORWARD

POST SUBJECT

Winchester 94 tube

BSA RED DOT, Back for another trial...

505Stevec

Re: 505Stevec

Paracord Bracelet