Boyds gun stocks ...... any opinions?

Welcome to the Leverguns.Com Forum. This is a high-class place so act respectable. We discuss most anything here ... politely.

Moderators: AmBraCol, Hobie

Forum rules
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.

Please post political post in the new Politics forum.
Post Reply
wm
Senior Levergunner
Posts: 1379
Joined: Tue Sep 11, 2007 8:03 pm

Boyds gun stocks ...... any opinions?

Post by wm »

I got chatting with nephew about his 450 Marlin 'problem' & he mentioned his other project which is resurrecting a Mauser from a sporterized mutilation and ruination. Bubba done goofed this one up royally.


Anyway he was looking at stocks and asked me about Boyds. I said I had good luck with a couple of them 20 years ago but I have not used one since. He said they had mixed reviews on line. Anyone have any advice I can pass a long?


Wm


P.S. Boyd's website. https://www.boydsgunstocks.com/
User avatar
GunnyMack
Advanced Levergunner
Posts: 10702
Joined: Mon Sep 19, 2016 7:57 am
Location: Not where I want to be!

Re: Boyds gun stocks ...... any opinions?

Post by GunnyMack »

I have used a couple different ones, a thumb hole for a Rem 700, guy didnt want it bedded. How it shoots I have no idea. I put a thumb hole stock and forend on my 870. Was real nice for scope use with slugs for deer hunting.

I have tried a few times to get Boyd's to do a ' special' cut for me but they will not cut model A for brand X and inlet it for brand C. So they aren't a real custom shop IMO. Their stuff is good though.
BROWN LABS MATTER !!
jnyork
Advanced Levergunner
Posts: 4443
Joined: Wed Sep 12, 2007 12:33 pm
Location: Wyoming and Arizona

Re: Boyds gun stocks ...... any opinions?

Post by jnyork »

I have 3 or 4, very satisfied. Beware, the laminated stocks are hard as a rock, if you need to some sanding be prepared to spend some time at it. :D
User avatar
Shasta
Senior Levergunner
Posts: 1560
Joined: Thu Sep 06, 2007 10:50 pm
Location: Shasta County, the far right stronghold in California

Re: Boyds gun stocks ...... any opinions?

Post by Shasta »

My only experience with replacement stocks was with my Remington SPS left hand varmint rifle. I got a laminated thumbhole stock from Stocky's Rifle Stocks and the barreled action dropped right in and bolted up into the aluminum bed without a hitch. Give them a look:

https://www.stockysstocks.com/

Shasta
California Rifle & Pistol Association LIFE Member
National Rifle Association BENEFACTOR LIFE Member


http://www.hcrpclub.org/schedule.html

avatar pic is Shasta Dam, Shasta Lake, & Mt. Shasta
Thunder50
Senior Levergunner
Posts: 1185
Joined: Mon Sep 10, 2007 10:18 pm
Location: Colorado

Re: Boyds gun stocks ...... any opinions?

Post by Thunder50 »

I have about a half dozen thumbhole stocks for my Remingtons and Savage heavy barrel rifles. I have no complaints about the product.
The meek shall inherit the earth, but I reserve the mineral rights!
All the knowledge in the world, is of no use to fools! (Eagles-long road out of Eden)
wm
Senior Levergunner
Posts: 1379
Joined: Tue Sep 11, 2007 8:03 pm

Re: Boyds gun stocks ...... any opinions?

Post by wm »

Thanks Shasta. I will pass that along.

Wm
Marvin S
Levergunner 3.0
Posts: 832
Joined: Wed Jul 21, 2010 9:55 pm
Location: Kansas

Re: Boyds gun stocks ...... any opinions?

Post by Marvin S »

jnyork wrote: Sun Dec 16, 2018 11:15 am I have 3 or 4, very satisfied. Beware, the laminated stocks are hard as a rock, if you need to some sanding be prepared to spend some time at it. :D
Yep like sanding/filing concrete. I got a left hand thumbhole for a Savage Axis, good stock and good fit just too long in the thumb web for me.
Post Reply