New Henry Products: .410 Levergun & Handi-Type Single Shots
Forum rules
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
New Henry Products: .410 Levergun & Handi-Type Single Shots
.
Check it out - Henry Repeating Arms is evidently planning to release a .410 levergun & break-open single-shot rifles in Jan 2017:
(the new guns are about 20mins into the video)
https://www.youtube.com/watch?v=InJK8hl ... .be&t=1242
.
Check it out - Henry Repeating Arms is evidently planning to release a .410 levergun & break-open single-shot rifles in Jan 2017:
(the new guns are about 20mins into the video)
https://www.youtube.com/watch?v=InJK8hl ... .be&t=1242
.
Re: New Henry Products: .410 Levergun & Handi-Type Single Sh
Made in WI now. I guess they had enough of NY.
I wish they would make 24" barrels on their 22's.
I wish they would make 24" barrels on their 22's.
I know a whole lot about very little and nothing about a whole lot.
Re: New Henry Products: .410 Levergun & Handi-Type Single Sh
jdad wrote:
Made in WI now. I guess they had enough of NY.
.
Henry jumped from the frying pan into the fire several years ago, when they moved production from Brooklyn, NY (NYC) across NY harbor to Bayonne, NJ (as denoted on their rifle's barrel address').
The Bayonne factory got flooded out in 2012 by hurricane Sandy, but AFAIK the facility was re-built there sometime in 2013.
I know Henry's had a barrel manufacturing facility in WI ever since the move from NY to NJ, but IDK if all production's brrn moved out of NJ.
/
Re: New Henry Products: .410 Levergun & Handi-Type Single Sh
I have a couple of H&R Handi's, they are, or were, relatively inexpensive blue collar everyman's utility tools.
how do they compare and contrast to the new henrys?
how do they compare and contrast to the new henrys?
. . . Grizz
the Good Confession > The Only Begotten Son of God >
https://www.blueletterbible.org/search/ ... rimary_0_1
https://compass.org/article-why-asking- ... -save-you/
†
the Good Confession > The Only Begotten Son of God >
https://www.blueletterbible.org/search/ ... rimary_0_1
https://compass.org/article-why-asking- ... -save-you/
†
- GunnyMack
- Advanced Levergunner
- Posts: 10261
- Joined: Mon Sep 19, 2016 7:57 am
- Location: Not where I want to be!
Re: New Henry Products: .410 Levergun & Handi-Type Single Sh
If I understand correctly, the center fire guns are built in WI, the rim fire are done in Bayonne.
I'm an hour or so west of there, been toying with the idea of sending him my resume...
I heard about the 410 but the single shot rifle is new to me. Guess I'll have to watch his infomercial.
I'm an hour or so west of there, been toying with the idea of sending him my resume...
I heard about the 410 but the single shot rifle is new to me. Guess I'll have to watch his infomercial.
BROWN LABS MATTER !!
Re: New Henry Products: .410 Levergun & Handi-Type Single Sh
Sure would like to see a 25-20 single shot.
- GunnyMack
- Advanced Levergunner
- Posts: 10261
- Joined: Mon Sep 19, 2016 7:57 am
- Location: Not where I want to be!
Re: New Henry Products: .410 Levergun & Handi-Type Single Sh
How about a 25-20, 32-20 LEVER GUN from Henry!! Oh heck, a 25-35 even !!
BROWN LABS MATTER !!
Re: New Henry Products: .410 Levergun & Handi-Type Single Sh
A new single-shot rifle coming to market: Spiffy!
Re: New Henry Products: .410 Levergun & Handi-Type Single Sh
Me thinks I would like to have one of those .410 lever shotguns if the price is right. I had a Winchester 9410 and liked it but sold it because someone offered me way more than it was worth at the time. God Bless.
Member : NRA
Oklahoma Rifle Assoc.
NPPAS
TRUISM: if guns are outlawed, only outlaws will have guns. So, my advice is: Buy more guns!
Oklahoma Rifle Assoc.
NPPAS
TRUISM: if guns are outlawed, only outlaws will have guns. So, my advice is: Buy more guns!
- gamekeeper
- Spambot Zapper
- Posts: 17474
- Joined: Thu Sep 06, 2007 3:32 pm
- Location: Over the pond unfortunately.
Re: New Henry Products: .410 Levergun & Handi-Type Single Sh
I'm sure interested in that L/A .410
Whatever you do always give 100%........... unless you are donating blood.
- Old Ironsights
- Posting leader...
- Posts: 15084
- Joined: Mon Apr 02, 2007 9:27 am
- Location: Waiting for the Collapse
- Contact:
Re: New Henry Products: .410 Levergun & Handi-Type Single Sh
It's actually one of the areas where I MIGHT like the Henry tube-load over the Win/Marlin Gate Load.gamekeeper wrote:I'm sure interested in that L/A .410
Maybe.
But I have a Rossi, so it might be a bit before Tony gets more of my money - unless I get another 45-70.
C2N14... because life is not energetic enough.
מנא, מנא, תקל, ופרסין Daniel 5:25-28... Got 7.62?
Not Depressed enough yet? Go read National Geographic, July 1976
Gott und Gewehr mit uns!
מנא, מנא, תקל, ופרסין Daniel 5:25-28... Got 7.62?
Not Depressed enough yet? Go read National Geographic, July 1976
Gott und Gewehr mit uns!
- gamekeeper
- Spambot Zapper
- Posts: 17474
- Joined: Thu Sep 06, 2007 3:32 pm
- Location: Over the pond unfortunately.
Re: New Henry Products: .410 Levergun & Handi-Type Single Sh
Yup, it wouldn't bother me in the .410, may work better for a 3" plastic shell, that's if they will be chambered for the 3" but I doubt it, the 2 1/2" is about as long as the action will take I guess.Old Ironsights wrote:
It's actually one of the areas where I MIGHT like the Henry tube-load over the Win/Marlin Gate Load.
Maybe.
Whatever you do always give 100%........... unless you are donating blood.
-
- Advanced Levergunner
- Posts: 9104
- Joined: Sun Jun 29, 2008 10:05 am
- Location: Sweetwater, TX
Re: New Henry Products: .410 Levergun & Handi-Type Single Sh
I have not been a fan of the Henry line, but that single shot has me drooling. I applaud them.
Re: New Henry Products: .410 Levergun & Handi-Type Single Sh
Their Wisconsin plant is about an 60 miles away from me. Two years ago when I was looking for a new job. I thought about applying , because they were moving all their center fire rifles production there. But it is just too far for daily driving. I do need to buy a Henry that is stamped Made in WI. It may be a single shot.
- Old Ironsights
- Posting leader...
- Posts: 15084
- Joined: Mon Apr 02, 2007 9:27 am
- Location: Waiting for the Collapse
- Contact:
Re: New Henry Products: .410 Levergun & Handi-Type Single Sh
Yeah. It's a shame, but economies of scale rule. There is just not enough market for a "stretched" 92/336 frame & action.gamekeeper wrote:Yup, it wouldn't bother me in the .410, may work better for a 3" plastic shell, that's if they will be chambered for the 3" but I doubt it, the 2 1/2" is about as long as the action will take I guess.Old Ironsights wrote:
It's actually one of the areas where I MIGHT like the Henry tube-load over the Win/Marlin Gate Load.
Maybe.
410 is barely popular enough for a gun that will handle a max 2.6".
Too bad really, but there you are.
C2N14... because life is not energetic enough.
מנא, מנא, תקל, ופרסין Daniel 5:25-28... Got 7.62?
Not Depressed enough yet? Go read National Geographic, July 1976
Gott und Gewehr mit uns!
מנא, מנא, תקל, ופרסין Daniel 5:25-28... Got 7.62?
Not Depressed enough yet? Go read National Geographic, July 1976
Gott und Gewehr mit uns!
-
- Advanced Levergunner
- Posts: 2054
- Joined: Mon Dec 10, 2007 12:43 pm
- Location: Between No Where & No Place, WA
Re: New Henry Products: .410 Levergun & Handi-Type Single Sh
The single shot rifle in the video looks very nice and I can always find room for another 30WCF. Though the cat's meow would be a .32 Winchester Special or .35 Remington!!
Has anyone heard more? I cannot find an on-line catalogue. The single shot rifle in the video had some very nice looking wood with checkering. "Wuz' wondering if that they were options/special order or what? If standard features, have a feeling that this single shot will not be as economical as the ol' and now defunct H&R Handi Rifle and this may be a deal breaker for some shooters. Same with interchangeable rifle barrels.
Has anyone heard more? I cannot find an on-line catalogue. The single shot rifle in the video had some very nice looking wood with checkering. "Wuz' wondering if that they were options/special order or what? If standard features, have a feeling that this single shot will not be as economical as the ol' and now defunct H&R Handi Rifle and this may be a deal breaker for some shooters. Same with interchangeable rifle barrels.
The most important aspect of this signature line is that you don't realize it doesn't say anything significant until you are just about done reading it & then it is too late to stop reading it....
Grand Poo Bah WA F.E.S.
In real life may you be the bad butt that you claim to be on social media.
Grand Poo Bah WA F.E.S.
In real life may you be the bad butt that you claim to be on social media.
Re: New Henry Products: .410 Levergun & Handi-Type Single Sh
.
With intro scheduled for Jan 2017, IMO it'll be awhile B 4 those questions can be answered.
No wine, before it's time.......
.
With intro scheduled for Jan 2017, IMO it'll be awhile B 4 those questions can be answered.
No wine, before it's time.......
.
-
- Advanced Levergunner
- Posts: 2054
- Joined: Mon Dec 10, 2007 12:43 pm
- Location: Between No Where & No Place, WA
Re: New Henry Products: .410 Levergun & Handi-Type Single Sh
Found a similar thread over at Gaybeard's ---
http://www.go2gbo.com/forums/hr-centerf ... 1100693553
Especially interesting was a post from SEK-22 Hornet on page two of the link:
"I emailed them and got a reply back the next day - it will be adult stocks only, no youth stocks planned. Price will place it as an upper end product - MSRP is not yet set. January availability planned (from the video). That's about all he said. He said to watch for more information. I ordered the catalog which subscribed me to their newsletter as well. Hopefully that will be the fastest way to hear about these things. They seem to be responsive to market demand, so if enough people ask for youth models and lower grade models, they might listen, once they hit the market and start selling a few. It will be interesting, whatever happens." (bold added: RCN)
http://www.go2gbo.com/forums/hr-centerf ... 1100693553
Especially interesting was a post from SEK-22 Hornet on page two of the link:
"I emailed them and got a reply back the next day - it will be adult stocks only, no youth stocks planned. Price will place it as an upper end product - MSRP is not yet set. January availability planned (from the video). That's about all he said. He said to watch for more information. I ordered the catalog which subscribed me to their newsletter as well. Hopefully that will be the fastest way to hear about these things. They seem to be responsive to market demand, so if enough people ask for youth models and lower grade models, they might listen, once they hit the market and start selling a few. It will be interesting, whatever happens." (bold added: RCN)
The most important aspect of this signature line is that you don't realize it doesn't say anything significant until you are just about done reading it & then it is too late to stop reading it....
Grand Poo Bah WA F.E.S.
In real life may you be the bad butt that you claim to be on social media.
Grand Poo Bah WA F.E.S.
In real life may you be the bad butt that you claim to be on social media.
- GunnyMack
- Advanced Levergunner
- Posts: 10261
- Joined: Mon Sep 19, 2016 7:57 am
- Location: Not where I want to be!
Re: New Henry Products: .410 Levergun & Handi-Type Single Sh
I too emailed Henry, asked about a 25-29/ 32-20 model. Mr Imperato did reply but not a yes or no answer... Maybe that will get him thinking.
BROWN LABS MATTER !!
Re: New Henry Products: .410 Levergun & Handi-Type Single Sh
That .410 levergun sounds cool.
D. Brian Casady
Quid Llatine Dictum Sit, Altum Viditur.
Advanced is being able to do the basics while your leg is on fire---Bill Jeans
Don't ever take a fence down until you know why it was put up---Robert Frost
Quid Llatine Dictum Sit, Altum Viditur.
Advanced is being able to do the basics while your leg is on fire---Bill Jeans
Don't ever take a fence down until you know why it was put up---Robert Frost
Re: New Henry Products: .410 Levergun & Handi-Type Single Sh
The single-shot rifles will initially be in 4 common calibers, as of right now. Could change, probably will.
Hammer guns, like the shotguns.
Iron sights.
Rubber recoil pads.
No external safety.
Ejectors.
The single-shot shotguns will be .410, 20, and 12. 12 will handle 3.5-inch shells.
Removable Full choke from the factory.
Both steel and brass framed models.
Steel will have rubber pad, brass may have a brass plate.
Steel will have a pistolgrip wrist, brass will have a straight wrist.
Bead front.
Extractors, not ejectors.
No external safety.
The .410 leverguns will be in two configurations: Longer barrel with bead & removable Full choke, and 20-incher with Cylinder Bore and iron sights.
Rubber pads.
Blue steel only.
No 3-inch chambers.
Henry runs two plants, as noted above, and sources components from about 5 different states.
NONE of these are in the catalog yet, NONE are in production yet.
Final specs are still being worked out on some.
These single-shots are not replacing the H&Rs as low-cost budget guns.
They are higher quality, expect to pay higher prices.
Denis
Hammer guns, like the shotguns.
Iron sights.
Rubber recoil pads.
No external safety.
Ejectors.
The single-shot shotguns will be .410, 20, and 12. 12 will handle 3.5-inch shells.
Removable Full choke from the factory.
Both steel and brass framed models.
Steel will have rubber pad, brass may have a brass plate.
Steel will have a pistolgrip wrist, brass will have a straight wrist.
Bead front.
Extractors, not ejectors.
No external safety.
The .410 leverguns will be in two configurations: Longer barrel with bead & removable Full choke, and 20-incher with Cylinder Bore and iron sights.
Rubber pads.
Blue steel only.
No 3-inch chambers.
Henry runs two plants, as noted above, and sources components from about 5 different states.
NONE of these are in the catalog yet, NONE are in production yet.
Final specs are still being worked out on some.
These single-shots are not replacing the H&Rs as low-cost budget guns.
They are higher quality, expect to pay higher prices.
Denis
Re: New Henry Products: .410 Levergun & Handi-Type Single Sh
Forgot: 24-inch .22s coming up.
Denis
Denis
- Old Ironsights
- Posting leader...
- Posts: 15084
- Joined: Mon Apr 02, 2007 9:27 am
- Location: Waiting for the Collapse
- Contact:
Re: New Henry Products: .410 Levergun & Handi-Type Single Sh
That Blue Steel Only is a bummer. I like to think of a 410 as a wet and dirty field gun. I really think having the 20" done up like the All Weather 45-70 would be a good thing.The .410 leverguns will be in two configurations: Longer barrel with bead & removable Full choke, and 20-incher with Cylinder Bore and iron sights.
Rubber pads.
Blue steel only.
No 3-inch chambers.
C2N14... because life is not energetic enough.
מנא, מנא, תקל, ופרסין Daniel 5:25-28... Got 7.62?
Not Depressed enough yet? Go read National Geographic, July 1976
Gott und Gewehr mit uns!
מנא, מנא, תקל, ופרסין Daniel 5:25-28... Got 7.62?
Not Depressed enough yet? Go read National Geographic, July 1976
Gott und Gewehr mit uns!
Re: New Henry Products: .410 Levergun & Handi-Type Single Sh
DPris wrote:Forgot: 24-inch .22s coming up.
Denis
Are you serious??? Anthony, within the last year, said they had no intention of producing a 24" Octagon or Golden Boy because demand for their current products was so high.
I would be in line to buy an H001T if it had a 24" barrel as would a HUGE mass of other shooters.
..............or do you mean a 24" single shot?
I know a whole lot about very little and nothing about a whole lot.
Re: New Henry Products: .410 Levergun & Handi-Type Single Sh
Meh, you're too old to be out in the rain.Old Ironsights wrote:That Blue Steel Only is a bummer. I like to think of a 410 as a wet and dirty field gun. I really think having the 20" done up like the All Weather 45-70 would be a good thing.The .410 leverguns will be in two configurations: Longer barrel with bead & removable Full choke, and 20-incher with Cylinder Bore and iron sights.
Rubber pads.
Blue steel only.
No 3-inch chambers.
I would not be without a single shot .410, but the H&R cheap 'un is plenty fine, and if it gets speckled, or banged up, I don't care. A true truck gun.
The Rotten Fruit Always Hits The Ground First
Proud Life Member Of:
NRA
Second Amendment Foundation
Citizens Committee For The Right To Keep And Bear Arms
DAV
Proud Life Member Of:
NRA
Second Amendment Foundation
Citizens Committee For The Right To Keep And Bear Arms
DAV
Re: New Henry Products: .410 Levergun & Handi-Type Single Sh
FOR NOW- only blued steel .410 levers.
The All-Weather line is expanding into other calibers for 2017 & IF the .410 levers sell well enough, I'd say it could be a possibility to include those later on.
Market acceptance will be a major determiner there, neither Winchester nor Marlin has been able to sell enough of their .410 levers in recent years to keep 'em in production, so that's all "to be determined".
SOME 24-inch rimfire barrels.
Can't say which models yet.
I can talk generally about things Anthony has already let out of the bag, but until or unless he announces more "new", I can't get too heavily into those.
And keep in mind ALL of this is still subject to change.
Early days on everything.
They're still working out final details.
Denis
The All-Weather line is expanding into other calibers for 2017 & IF the .410 levers sell well enough, I'd say it could be a possibility to include those later on.
Market acceptance will be a major determiner there, neither Winchester nor Marlin has been able to sell enough of their .410 levers in recent years to keep 'em in production, so that's all "to be determined".
SOME 24-inch rimfire barrels.
Can't say which models yet.
I can talk generally about things Anthony has already let out of the bag, but until or unless he announces more "new", I can't get too heavily into those.
And keep in mind ALL of this is still subject to change.
Early days on everything.
They're still working out final details.
Denis
- Old Ironsights
- Posting leader...
- Posts: 15084
- Joined: Mon Apr 02, 2007 9:27 am
- Location: Waiting for the Collapse
- Contact:
Re: New Henry Products: .410 Levergun & Handi-Type Single Sh
Well, there's always Cerakote.
It would be interesting to see what the sales figures for the Rossi Rio Grande 410 are like.
It would be interesting to see what the sales figures for the Rossi Rio Grande 410 are like.
C2N14... because life is not energetic enough.
מנא, מנא, תקל, ופרסין Daniel 5:25-28... Got 7.62?
Not Depressed enough yet? Go read National Geographic, July 1976
Gott und Gewehr mit uns!
מנא, מנא, תקל, ופרסין Daniel 5:25-28... Got 7.62?
Not Depressed enough yet? Go read National Geographic, July 1976
Gott und Gewehr mit uns!
Re: New Henry Products: .410 Levergun & Handi-Type Single Sh
Probably at least three a year.
Denis
Denis
Re: New Henry Products: .410 Levergun & Handi-Type Single Sh
BTW, 2 1/2" 410s chamber and fire in a .444..... Feeding is real iffy....
The Rotten Fruit Always Hits The Ground First
Proud Life Member Of:
NRA
Second Amendment Foundation
Citizens Committee For The Right To Keep And Bear Arms
DAV
Proud Life Member Of:
NRA
Second Amendment Foundation
Citizens Committee For The Right To Keep And Bear Arms
DAV
Re: New Henry Products: .410 Levergun & Handi-Type Single Sh
I'll take one in 22 hornet. That would be a dandy.
- GunnyMack
- Advanced Levergunner
- Posts: 10261
- Joined: Mon Sep 19, 2016 7:57 am
- Location: Not where I want to be!
Re: New Henry Products: .410 Levergun & Handi-Type Single Sh
Email from Henry today, listing the original Henry style, long barrel and carbine models. Also had the 24" .22 with octagon barrels- READY FOR SHIPPING.
BROWN LABS MATTER !!
Re: New Henry Products: .410 Levergun & Handi-Type Single Sh
And there you go!
Denis
Denis
Re: New Henry Products: .410 Levergun & Handi-Type Single Sh
Even with that STUPID barrel band I still think I'm going to buy one. Half the price of a 39A.
https://www.henryrifles.com/rifles/leve ... ier-rifle/
https://www.henryrifles.com/rifles/leve ... ier-rifle/
I know a whole lot about very little and nothing about a whole lot.
- marlinman93
- Advanced Levergunner
- Posts: 6500
- Joined: Sun Apr 01, 2007 3:40 pm
- Location: Oregon
Re: New Henry Products: .410 Levergun & Handi-Type Single Sh
I bet a guy could easily get a forearm hanger, cap, and screws for a 39a and adapt them to that Henry. Then shape the forearm down to remove the band stop area. Would be a little work, but turn it into a nicer looking rifle.jdad wrote:Even with that STUPID barrel band I still think I'm going to buy one. Half the price of a 39A.
https://www.henryrifles.com/rifles/leve ... ier-rifle/
Pre WWI Marlins and Singleshot rifles!
http://members.tripod.com/~OregonArmsCollectors/
http://members.tripod.com/~OregonArmsCollectors/
Re: New Henry Products: .410 Levergun & Handi-Type Single Sh
BlaineG wrote:Meh, you're too old to be out in the rain.Old Ironsights wrote:That Blue Steel Only is a bummer. I like to think of a 410 as a wet and dirty field gun. I really think having the 20" done up like the All Weather 45-70 would be a good thing.The .410 leverguns will be in two configurations: Longer barrel with bead & removable Full choke, and 20-incher with Cylinder Bore and iron sights.
Rubber pads.
Blue steel only.
No 3-inch chambers.
I would not be without a single shot .410, but the H&R cheap 'un is plenty fine, and if it gets speckled, or banged up, I don't care. A true truck gun.
Yeah, me too......
Merle from PA