Marlin1894 CL

jnyork · Post by **jnyork** » Fri Apr 18, 2008 5:18 pm

Does someone have a link to illustrated disassembly/assembly instructions for the Marlin 1894 CL, there was a link here at one time and I have lost it. Thanks.

Post by **Hobie** » Fri Apr 18, 2008 6:03 pm

All the 1894s are the same and really the same as the 336. If there is something different, what would it be?

Remember, one always starts with "clear the weapon".

Hey, WHY do you have to disassemble it?

jnyork · Post by **jnyork** » Fri Apr 18, 2008 6:27 pm

Well, I dont have one for ANY 1894 and would like to have one. I have been getting light primer strikes causing misfires and I want to see if the firing pin channel is gunked up. Yup, it's clear.

Post by **Hobie** » Fri Apr 18, 2008 6:55 pm

jnyork wrote:Well, I dont have one for ANY 1894 and would like to have one. I have been getting light primer strikes causing misfires and I want to see if the firing pin channel is gunked up. Yup, it's clear.

So, you're squared away now? I asked why because there's some short cuts to some things other than doing the whole deal.

old goat · Post by **old goat** » Fri Apr 18, 2008 7:20 pm

...Go to the Leverguns home site, and scroll down the right hand column. Click on Marlin Resources. I think you will find what you're looking for there.

...old goat

jnyork · Post by **jnyork** » Fri Apr 18, 2008 10:42 pm

Got it! Thanks from one old goat to another!

jnyork · Post by **jnyork** » Sat Apr 19, 2008 2:53 pm

Thanks, T B , I might have to do the same thing. Do I understand someone makes a one-piece firing pin, and is that an advantage and why??