
How's your components availability and prices?
Forum rules
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
-
- Advanced Levergunner
- Posts: 4454
- Joined: Wed Sep 12, 2007 12:33 pm
- Location: Wyoming and Arizona
How's your components availability and prices?
Seems to be getting very slowly better here, was in Rocky Mountain Sports in Riverton WY this AM, they had plenty of IMR and Hodgdens powder at 28-30 , down about 5-6 from the high. Pretty much had all the primers you wanted, I got a brick of Federal 200 for 35.03 out the door with the tax and all, better by 10 bucks than the last I saw in Yuma a couple weeks ago and vastly better stock. Plenty of bullets of all types. No .22 rimfire of course. Still, an improvement over the last couple of years and we can only hope the trend continues. 

Re: How's your components availability and prices?
No pistol powders around that I know of.....spotty .22, but I've not seen any.
The Rotten Fruit Always Hits The Ground First
Proud Life Member Of:
NRA
Second Amendment Foundation
Citizens Committee For The Right To Keep And Bear Arms
DAV
Proud Life Member Of:
NRA
Second Amendment Foundation
Citizens Committee For The Right To Keep And Bear Arms
DAV
- gundownunder
- Senior Levergunner
- Posts: 1449
- Joined: Fri Sep 07, 2007 12:02 pm
- Location: Perth. Western Australia
Re: How's your components availability and prices?
Basic stuff like CCI SR primers, CCI solid Minimags etc will take a call to 2 -3 shops.
Prices go up a heck of a lot faster than my pay does.
If you ask for something a little less common, such as Starline 32-20 brass, 99% of shops will laugh at you and the last one will want an arm, a leg, and one of your bells as well, and that's for just 50.
Prices go up a heck of a lot faster than my pay does.
If you ask for something a little less common, such as Starline 32-20 brass, 99% of shops will laugh at you and the last one will want an arm, a leg, and one of your bells as well, and that's for just 50.
Bob
***********************************
You have got to love democracy-
It lets you choose who your dictator is going to be.
***********************************
***********************************
You have got to love democracy-
It lets you choose who your dictator is going to be.
***********************************
- Shasta
- Senior Levergunner
- Posts: 1581
- Joined: Thu Sep 06, 2007 10:50 pm
- Location: Shasta County, the far right stronghold in California
Re: How's your components availability and prices?
Here in the far north of Kalifornia, most primers are readily available. Powder is very hit-and-miss, and my favorite powders IMR 4198 and Reloader 7 are very hard to come by. The "dot" powders are also tough to find. There is a pretty good supply of the pointy, spendy bullets like Nosler and Swift, but it can be very difficult to find bullets suitable for leverguns. Makes me glad I cast my own!
SHASTA
SHASTA
California Rifle & Pistol Association LIFE Member
National Rifle Association BENEFACTOR LIFE Member
http://www.hcrpclub.org/schedule.html
avatar pic is Shasta Dam, Shasta Lake, & Mt. Shasta
National Rifle Association BENEFACTOR LIFE Member
http://www.hcrpclub.org/schedule.html
avatar pic is Shasta Dam, Shasta Lake, & Mt. Shasta
Re: How's your components availability and prices?
22RF is all but impossible to buy locally still. Only store in town that sells powder is sloooooowly improving on the powder available. Usually they will have some of the slower rifle powders on the shelf. Pistol powders are gone in a day or two of receiving shipment.
NRA Life Member
Re: How's your components availability and prices?
Last week at the Mary'sville, WA Cabelas, I found a pound of Bullseye..$25.95.
-
- Advanced Levergunner
- Posts: 5492
- Joined: Mon Apr 02, 2007 9:23 pm
- Location: Batesville,Arkansas
Re: How's your components availability and prices?
Gander Mountain in Little Rock seems to be improving some over the last couple of years. Monday I got a carton of CCI large pistol primers and about two weeks ago my grandson was down there and got us a carton of CCI small pistol primers priced at 38bucks but at least we got them.
JerryB II Corinthians 3:17, Now the Lord is that Spirit: and where the Spirit of the Lord is, there is liberty.
JOSHUA 24:15
JOSHUA 24:15