30-40-KRAG

Welcome to the Leverguns.Com Forum. This is a high-class place so act respectable. We discuss most anything here ... politely.

Moderators: AmBraCol, Hobie

Forum rules
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.

Please post political post in the new Politics forum.
Post Reply
Hecter
Levergunner 1.0
Posts: 52
Joined: Mon Jan 28, 2008 8:38 pm
Location: upstate new york

30-40-KRAG

Post by Hecter »

ANYONE OUT THERE WITH A PET CAST LOAD FOR THE 30-40 KRAG CARTRIDGE. I'M THINKING 180-210 GRAIN BULLET. SPEED AROUND 1400-1800FPS. THANKS FOR ANY INFO.
User avatar
Shasta
Senior Levergunner
Posts: 1577
Joined: Thu Sep 06, 2007 10:50 pm
Location: Shasta County, the far right stronghold in California

Re: 30-40-KRAG

Post by Shasta »

I've been having good results with the Lyman 311299, which with the alloy I used weighs 198 gr. with lube and gas check.

A charge of 20.0 gr. IMR 4198 gave 1,578 feet per second. Here is a five shot group fired off the bench at 50 yards with my iron sighted 1898 Springfield:

Image



A charge of 23.0 gr. IMR 4198 gives an even 1,800 fps with accuracy remaining very good despite one shot being a bit out of the group:

Image


SHASTA
Last edited by Shasta on Thu Jul 02, 2020 12:00 pm, edited 1 time in total.
California Rifle & Pistol Association LIFE Member
National Rifle Association BENEFACTOR LIFE Member


http://www.hcrpclub.org/schedule.html

avatar pic is Shasta Dam, Shasta Lake, & Mt. Shasta
User avatar
2ndovc
Advanced Levergunner
Posts: 9581
Joined: Fri Sep 07, 2007 11:59 am
Location: OH, South Shore of Lake Erie

Re: 30-40-KRAG

Post by 2ndovc »

Shasta's first load is very close to my own. Loads of fun and quite accurate.
It's accounted for many varmints over the years.

jb 8)
jasonB " Another Dirty Yankee"


" Tomorrow the sun will rise. Who knows what the tide could bring?"
Post Reply