PAY IT FORWARD

budliteguy · Post by **budliteguy** » Wed Apr 02, 2008 1:47 pm

Thanks Mokwaw
Marbles sight,is spoken for.

mklwhite · Post by **mklwhite** » Wed Apr 02, 2008 3:04 pm

Mokwaw wrote:
mklwhite wrote:
Mokwaw wrote:
mklwhite wrote: Are those the "flush fitting" mags? If so, then I'd like them.
They hang out a bit, not flush to stock. Yours if you want them.
I Would. Thank you. PM sent.
They're yours, postage paid. Will get them in the mail ASAP.

Thanks! Looking forward to using them.

Post by **Ysabel Kid** » Wed Apr 02, 2008 9:21 pm

rusty shackelford wrote:way OT:

wood working book and scroll saw patterns free to a good home 15 to 20 books [heavy]
and some other miss... stuff
all i ask is that you off set the cost of shipping
i can do pictures so you can pict what you want .

rusty

I'm a miserable failure!

I have to release this opportunity fellas. In the spirit of this event, I've been looking for something I don't need or I'm not using, and something of similar value. I just don't keep a lot of stuff I'm not using or won't be using in the future.

Sorry for delaying this one rusty!

rjohns94 · Post by **rjohns94** » Wed Apr 02, 2008 9:44 pm

YK,

Keep your dibs, I will offer up for you, two boxes of .45 caliber, .4595", one box of 280grit, one box of 320 grit. 60 bullets each box.

free to good home.

mike

Post by **Ysabel Kid** » Wed Apr 02, 2008 9:48 pm

Thanks Mike!

Rusty, if that's okay with you, send me a pm...

rusty shackelford · Post by **rusty shackelford** » Thu Apr 03, 2008 8:30 pm

no problem , wood working books up for grabs ,

NOTE: i will be out of town from Saturday to next Saturday, i have no way to check internet at all

rusty

rjohns94 · Post by **rjohns94** » Thu Apr 03, 2008 9:42 pm

Rusty, the books go to YK. I did his pay it forward for him. They should not be up for dibs. YK wants them. Ok??

rusty shackelford · Post by **rusty shackelford** » Fri Apr 04, 2008 6:11 am

ya there are some more up,
there is a printer box full of misc , wood books .
jay gets the first batch.

rusty

rjohns94 · Post by **rjohns94** » Fri Apr 04, 2008 6:57 am

ahhh sorry for butting in. VBg

Old Ironsights · Post by **Old Ironsights** » Fri Apr 04, 2008 10:19 am

Got a Speedloader for a Ruger SP101 (.38/.357) if anyone wants it...

JReed · Post by **JReed** » Fri Apr 04, 2008 6:49 pm

Mtnfolk75 wrote:Since noboby is interested in the 30-06 stuff
Thanks, Dusty

Are you still looking to get rid of the 30-06 stuff? Buddy of mine shots 06 and can use more stuff.

I will offer up a Hunter gunbelt with loops for 38/357 and the drop holster for 7 1/2" SA revolver.

Post by **AmBraCol** » Fri Apr 04, 2008 6:56 pm

JReed wrote:
Mtnfolk75 wrote:Since noboby is interested in the 30-06 stuff
Thanks, Dusty
Are you still looking to get rid of the 30-06 stuff? Buddy of mine shots 06 and can use more stuff.

I will offer up a Hunter gunbelt with loops for 38/357 and the drop holster for 7 1/2" SA revolver.

How well fed could a gunslinger be and still get that belt around him? In other words, what size belt is it?

JReed · Post by **JReed** » Fri Apr 04, 2008 6:59 pm

Ok I had a chance to swing by the house. The belt is 41" from the buckle to the first hole on the belt so it should fit a 40" waist. I was mistaken earlier the holster is for a 4 3/4" bbl SA revolver.

arjunky · Post by **arjunky** » Fri Apr 04, 2008 7:33 pm

44/40 wrote:You've got 'em Byron. Email me your mailing address and I'll send them out on Monday. My email xny@isp.com

Any takers on the Pachmayrs ??

Thanks 44/40, wife said they came yesterday. Just got home. They look GREAT!
Now I have a reason to get that 629 I borrowed to a friend back.

Byron

Mtnfolk75 · Post by **Mtnfolk75** » Fri Apr 04, 2008 8:23 pm

Jeremy,
Shoot me a PM with the shipping info and it is yours.

Dusty

44/40 · Post by **44/40** » Fri Apr 04, 2008 11:09 pm

Jeremy, if the gunbelt and holster aren't spoken for, I'll take them.
Offering up a Cold Steel Canadian Belt Knife (4" blade) & sheath.

JReed · Post by **JReed** » Fri Apr 04, 2008 11:27 pm

44/40
they are yours PM me your info I will try to run by the post office tomorow.

Mokwaw · Post by **Mokwaw** » Sat Apr 05, 2008 6:34 am

44/40....Packy grips arrived......thanks.

Mklwhite....SKS mags went out USPS on Thursday............

Budliteguy....Bushnell scope went out USPS on Thursday.......

mklwhite · Post by **mklwhite** » Sat Apr 05, 2008 11:00 am

Mokwaw wrote: Mklwhite....SKS mags went out USPS on Thursday............

Came in today and they work fine in mine. Thanks!

With that in mind I am putting up a 20 round metal SKS mag that didn't work so well in mine.

budliteguy · Post by **budliteguy** » Tue Apr 08, 2008 9:22 am

Mokwaw Received the scope,Havent opened it yet.

meanc- Marble sight is on the way

Old Ironsights · Post by **Old Ironsights** » Tue Apr 08, 2008 10:28 am

44/40 wrote:Jeremy, if the gunbelt and holster aren't spoken for, I'll take them.
Offering up a Cold Steel Canadian Belt Knife (4" blade) & sheath.

Got a Pic of that lil pigsticker?

44/40 · Post by **44/40** » Tue Apr 08, 2008 11:19 pm

O.I. shoot me an email and I'll send a picture.
xny@isp.com

Marlin .35 · Post by **Marlin .35** » Wed Apr 09, 2008 2:14 pm

Sent you an E-mail about pics forthe "pig sticker." Thanks, Art Navar1105@bellsouth.net

Old Ironsights · Post by **Old Ironsights** » Wed Apr 09, 2008 2:44 pm

44/40 wrote:O.I. shoot me an email and I'll send a picture.
xny@isp.com

That looks like it will make a sweet skinning knife - and I don't have anything like it.

I will gladly accept it! You've got my postal addy.

Thanks!

I still have the SP101 Speed Loader up for grabs - and I'll add an almost NIB set of RCBS .444 dies.

505stevec · Post by **505stevec** » Wed Apr 09, 2008 3:51 pm

If the 6-CETME mags are available I will take them. I will have to get home and see what I have to offer up.

No response, just forget the mags. thanks anyway

oldmax · Post by **oldmax** » Wed Apr 09, 2008 5:38 pm

Herter case trimmer, NO arbor... ( shell holder )

44/40 · Post by **44/40** » Wed Apr 09, 2008 6:43 pm

You've got the knife Bryan. It'll be in the mail tomorrow or Fri. at the latest.

budliteguy · Post by **budliteguy** » Thu Apr 10, 2008 9:31 pm

505 stevec- the CEMTE mag's are still available if you want them send me an address and I'll get them to you.

oldmax- I'll take the Shell trimmer if still available.

Remember If you put did's on somthing, you need to put something back up. The scope came in from Mokwaw, it was new in the pack so I'll put up my old scope to anyone that wants it. Its an old 4x32 bushnell sportview.

oldmax · Post by **oldmax** » Fri Apr 11, 2008 5:22 am

Budlitguy, it's yours...

budliteguy · Post by **budliteguy** » Fri Apr 11, 2008 9:25 am

Thank you

I still have the scope up for grabs and looks like the Magazines too, If you ask for either one, dont expect an quick response, I do work and I dont get to check the forum until late at night, Best to PM me on an item. That way I can see you ask First. I will get back with you!!!! T.C.

Old Ironsights · Post by **Old Ironsights** » Sun Apr 13, 2008 4:27 pm

btt:

I have available:

NIB(ish) RCBS .444 die set

Galco IWB holster set for 1911 Officer's model & extra mag: (PN NSA 266 & NSAMC 26)

Speed Loader for 5 shot 38/.357 (SP101)

victor · Post by **victor** » Sun Apr 13, 2008 5:10 pm

i still have a set of pachmyer presentation grips for Ruger SBH.

now available is a set of pachmyer gripper grips for Ruger Redhawk.

also a box(130ct.)of 7mm TCU fireformed brass.

Vic

44/40 · Post by **44/40** » Sun Apr 13, 2008 6:06 pm

O.I. I'll take the IWB Officers Mod. Holster set & mag.

Old Ironsights · Post by **Old Ironsights** » Sun Apr 13, 2008 7:10 pm

44/40 wrote:O.I. I'll take the IWB Officers Mod. Holster set & mag.

Seems like a fair trade for the knife...

JB · Post by JB » Mon Apr 14, 2008 9:25 am

Old Ironsights wrote:btt:

Galco IWB holster set for 1911 Officer's model & extra mag: (PN NSA 266 & NSAMC 26)

I could use the holster. I'll have to inventory my "junk" tonight to see what goodies to offer back up.

Old Ironsights · Post by **Old Ironsights** » Mon Apr 14, 2008 9:33 am

JB wrote:
Old Ironsights wrote:btt:

Galco IWB holster set for 1911 Officer's model & extra mag: (PN NSA 266 & NSAMC 26)

I could use the holster. I'll have to inventory my "junk" tonight to see what goodies to offer back up.

Sorry, 44/40 already called "Dibs" and the holster is already in the morning Post.

You are welcomt to the .444 dies though (per your PM). (Shipped)

Looks like I'm down to my poor lonely SP101 Speed Loader again.

44/40 · Post by **44/40** » Mon Apr 14, 2008 1:23 pm

Another knife up for grabs:
Cold Steel Kudu model folder. 4" blade, 10" O.A.L.

levers · Post by **levers** » Mon Apr 14, 2008 9:54 pm

If the 444 dies are still available, I'd say dibs on them. Let me know if they are and I'll come up with my offering.

Old Ironsights · Post by **Old Ironsights** » Mon Apr 14, 2008 10:03 pm

Unbelieveable!

I've had the silly things on auction for ever... even offered them up a few times here.

Now, the day I send them out to one guy, I get a bid on my auction (oops)

and another guy here wants them too!

Maybe I should have charged more...

Sorry Levers. They're gone. If I'm fortunate the guy who bid on them will take kindly to my *** story of not being smart enough to pull the auction before mailing the fool things off (he literally bid 2 hrs after I dropped them in the mail).

If not, well, he gets a new set for 50% off retail since I don't renig.

levers · Post by **levers** » Mon Apr 14, 2008 10:11 pm

Hi OI
No problems. I didn't realize that they were spoken for. I should have read your posting more carefully.

Old Ironsights · Post by **Old Ironsights** » Mon Apr 14, 2008 10:15 pm

No dig on you man. Just typical of the way my life works.

JB · Post by JB » Tue Apr 15, 2008 11:28 am

I'll offer up two magazines for an AMT 22 mag. auto.

lever-4-life · Post by **lever-4-life** » Tue Apr 15, 2008 4:00 pm

I Will take the mags for the amt if they are the 9 shot.

I am offering N.I.B. pachmayers for a j-frame smith and ruger Super blackhawk: Both are taken

JB · Post by JB » Tue Apr 15, 2008 4:04 pm

I believe they are 9 shot, but someone beat you to the draw. Sorry

Old Ironsights · Post by **Old Ironsights** » Tue Apr 15, 2008 4:09 pm

JB wrote:I believe they are 9 shot, but someone beat you to the draw. Sorry

Hey all - for the sake of clarity Please Post your "Dibs" here on the open forum before PM-ing with your shipping info.

It will make things way less confusing/dissapointing.

Marlin .35 · Post by **Marlin .35** » Thu Apr 17, 2008 12:15 am

Correct Old Ironsights. That should be a forum rule to give everybody a fair chance at the item!!! Art

rjohns94 · Post by **rjohns94** » Thu Apr 17, 2008 5:48 am

Was wondering if we could "clean" this thread up somehow. Currently, we have to go through five pages of discussions to see what is available. Unless you are reading every post on this thread and keeping a score card, no way in knowing whats available or not. Any thoughts?

victor · Post by **victor** » Thu Apr 17, 2008 7:29 am

I agree rjohns94 ,it could make ya dizzy.I suggest our friend Hobie delete everything back to my first post.I will repost my items up for grabs and i'm sure other members who have unclaimed items will repost.It looks like there is not much left at this time.We could start with a cleaner slate.What say you Hobie? Thank you

44/40 · Post by **44/40** » Thu Apr 17, 2008 6:12 pm

Old Ironsides - Galco leather arrived.
JReed - Hunter leather arrived.
Thanks fellas !

No takers on the Cold Steel folder ?

Mtnfolk75 · Post by **Mtnfolk75** » Thu Apr 17, 2008 8:38 pm

44/40,
I take a dibs on the Cold Steel folder if it is still available. I have already sent out two, the 5.56 Nato brass to JB and the 30-06 stuff to JReed.

Thanks,

PAY IT FORWARD

Re: pat it forward.but way OT

Re: Pay it Forward ...

Re: Pay it Forward ...

30-06 Stuff

pigsticker

Re: pigsticker

Cold Steel folder