I have a Winchester 94 with the rebounding hammer that I would like to convert to the old style half cock non-rebounding hammer. This is a pre safety angle eject model if that matters.
What parts do I need to do the conversion?
Winchester 94 rebounding hammer conversion
Forum rules
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
Re: Winchester 94 rebounding hammer conversion
.
AFAIK, at least a hammer with a half-cock notch, a matching mainspring strut, and possibly a new MS (you may/may not need a different length) - IIRC, the triggers are the same.
.
AFAIK, at least a hammer with a half-cock notch, a matching mainspring strut, and possibly a new MS (you may/may not need a different length) - IIRC, the triggers are the same.
.
Re: Winchester 94 rebounding hammer conversion
If you find the parts, don't balk at the price. I was finding one or two complete lower tang assemblies every summer at a particular gun show and selling them, but the guy that usually had them said he couldn't get all the parts any more and was running out of them. He didnt have any this year when I wanted to get one or two to pass along.
"Far better it is to dare mighty things, to win glorious triumphs even though checkered by failure, than to rank with those poor spirits who neither enjoy nor suffer much because they live in the gray twilight that knows neither victory nor defeat." -Theodore Roosevelt-
Isnt it amazing how many people post without reading the thread?
Isnt it amazing how many people post without reading the thread?
-
- Site Sponsor
- Posts: 2507
- Joined: Fri Sep 07, 2007 12:05 pm
- Location: Lampasas, Texas
- Contact:
Re: Winchester 94 rebounding hammer conversion
Try this;
Rebounding Hammer Conversion-pics
Rebounding Hammer Conversion-pics
Steve Young aka Nate Kiowa Jones Sass# 6765
Steve's Guns aka "Rossi 92 Specialists"
205 Antler lane
Lampasas, Texas 76550
http://www.stevesgunz.com
Email; steve@stevesgunz.com
Tel: 512-564-1015
Steve's Guns aka "Rossi 92 Specialists"
205 Antler lane
Lampasas, Texas 76550
http://www.stevesgunz.com
Email; steve@stevesgunz.com
Tel: 512-564-1015
Re: Winchester 94 rebounding hammer conversion
Thanks, exactly what I needed.