Buckshot anyone?
Forum rules
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
Buckshot anyone?
In case you want to do it all yourself in making buckshot loads for your LEVERACTION SHOTGUN, here is the mould you've been looking for.
http://buckshotmold.com/
http://buckshotmold.com/
If you're gonna be stupid ya gotta be tough-
Isiah 55:8&9
It's easier to fool people than it is to convince them they have been fooled.
Isiah 55:8&9
It's easier to fool people than it is to convince them they have been fooled.
Re: Buckshot anyone?
Rusty,
Thanks a lot.
I have trouble finding heavy shot loads where I live.
I will make my own,now that I know I can.
Thanks again.
Thanks a lot.
I have trouble finding heavy shot loads where I live.
I will make my own,now that I know I can.
Thanks again.
-
- Senior Levergunner
- Posts: 1459
- Joined: Wed Feb 06, 2008 6:31 pm
- Location: Arizona Territory
Re: Buckshot anyone?
The .380 mold is perfect for the .36 cal. C&B Revolver shooters.
SASS# 51223
Arizona Cowboy Shooter's Assoc.
Cowtown Cowboy Shooter's Assoc.
Uberti 73/44-40 carbine, Rossi 92/44-40,
Marlin 94CB/44 24" Limited, Winchester 94/30-30
Arizona Cowboy Shooter's Assoc.
Cowtown Cowboy Shooter's Assoc.
Uberti 73/44-40 carbine, Rossi 92/44-40,
Marlin 94CB/44 24" Limited, Winchester 94/30-30
Re: Buckshot anyone?
Thank you for posting this, I have been looking for some molds to make round ball for plinking loads for my rifles.
Steve
Steve
- Ji in Hawaii
- Senior Levergunner
- Posts: 1987
- Joined: Sat Jan 15, 2011 1:05 pm
- Location: Moku Manu, Hawai'i
Re: Buckshot anyone?
Great for sling-shot ammo too.
Illegitimus Non Carborundum
Akā, ʻo ka poʻe hilinaʻi aku iā Iēhova, e ulu hou nō ko lākou ikaika;
E piʻi ʻēheu aku nō lākou i luna, e like me nā ʻaito;
E holo nō lākou, ʻaʻole hoʻi e māloʻeloʻe,
E hele mua nō lākou, ʻaʻole hoʻi e maʻule.
`Isaia 40:31
Akā, ʻo ka poʻe hilinaʻi aku iā Iēhova, e ulu hou nō ko lākou ikaika;
E piʻi ʻēheu aku nō lākou i luna, e like me nā ʻaito;
E holo nō lākou, ʻaʻole hoʻi e māloʻeloʻe,
E hele mua nō lākou, ʻaʻole hoʻi e maʻule.
`Isaia 40:31
Re: Buckshot anyone?
The molds look okay and seem resonable enough , but that Bubba Rountree fellow that does the Youtube videos for them I don't particularly care for .
While an okay idea I kinda prefer buying ready made buckshot in 5 or 25 pound lots and then reloadeding it .
While an okay idea I kinda prefer buying ready made buckshot in 5 or 25 pound lots and then reloadeding it .
Parkers , Mannlicher Schoenauer’s , 6.5mm's and my family in the Philippines !
Re: Buckshot anyone?
I push home cast OO buck .33 thru a Lee .314 push thru sizer, lube with Lee alox and load two in the 32 S&W long using 98 GR WC data, two shoot to the sights on my Mod 31, one shoots to low to be any fun.Mescalero wrote:Rusty,
Thanks a lot.
I have trouble finding heavy shot loads where I live.
I will make my own,now that I know I can.
Thanks again.
The pellet's come out of the sizer with a nice belt at the mid section and hold the rifling well, 25 yrd accuracy is excellent at 775 FPS.
My mold is a Morgan mold made in Denmark by a good shooting machinist , it's cut for nine OO and eight OOO .
---J
Keep The Peace, Love and Harmony, These are the Gold Nuggets, All Else Is Sand !!
Re: Buckshot anyone?
I have one of those in 7.62, er 30 cal, uh #1 buck ...
-
- Advanced Levergunner
- Posts: 6972
- Joined: Tue Apr 03, 2007 8:52 pm
- Location: Ridgefield WA. USA
Re: Buckshot anyone?
Lee has a buckshot mold too. Strips of foil placed in the correct place will give split shot for fishing I am told.
Re: Buckshot anyone?
I should have been more specific, heavy shot loads for .20 guage; are hard to come by where I live.
Re: Buckshot anyone?
I've been using one of the "Do-It" slingshot ammo molds to cast my own buckshot for several years. One side casts a ball about # 1 size and the other side does 000. Also can be used for round ball loads for .30 and 38. They do well in a wrist rocket.
Never take life seriously, cause there's no way of getting out of it alive.
Re: Buckshot anyone?
loader,
I like your line
I like your line
Re: Buckshot anyone?
stolen from Elbert Hubbard
Never take life seriously, cause there's no way of getting out of it alive.
-
- Senior Levergunner
- Posts: 1504
- Joined: Tue Sep 04, 2007 1:02 pm
- Location: Eastern Ohio, Foothills of Appalachia
- Contact:
Re: Buckshot anyone?
Oh. I thought it was Van Wilder.loader wrote:stolen from Elbert Hubbard
Click Click Boom
Re: Buckshot anyone?
I could be wrong of course. Not going to seriously worry about it though. I just like and believe it
Never take life seriously, cause there's no way of getting out of it alive.