How do I clean 310 dies?

Tycer · Post by **Tycer** » Thu Jul 11, 2013 6:26 am

I have a bunch of 310 dies I'm going to list on fleabay. Some have some lube on them and some have a bit of light rust.
Is there a way to clean them all at once?

Eye-Bite! · Post by **Eye-Bite!** » Thu Jul 11, 2013 6:52 am

I did a previous post requesting some Preventative measures over this issue etc. Now after a quick Goooble search , there are multiple good information sources of your exact question with a good remedy.

Tycer · Post by **Tycer** » Thu Jul 11, 2013 7:10 am

Eye-Bite! wrote:I did a previous post requesting some Preventative measures over this issue etc. Now after a quick Goooble search , there are multiple good information sources of your exact question with a good remedy.

I remember that thread. I have a good regimen for preventing rust. These came to me like this. I could google it too, but then I would not be having a dialog with y'all and you can't believe everything you read from the interwebs like you can from these guys and gals.

Eye-Bite! · Post by **Eye-Bite!** » Thu Jul 11, 2013 7:11 am

Eye-Agree!

Post by **Hobie** » Thu Jul 11, 2013 7:59 am

What was the name of that stuff that removed the rust and gunk so well? (CRS this morning...)

Eye-Bite! · Post by **Eye-Bite!** » Thu Jul 11, 2013 8:22 am

Preventative Man-Tenance and Elbo-Grease.

Post by **Chuck 100 yd** » Thu Jul 11, 2013 1:12 pm

On precision tools such as reloading dies, I clean them in Turpentine with a small amount of automatic transmission fluid or Marvel Mistery Oil added. 0000 steel wool will remove light rust without harming the black oxide finish and can be done as part of the wash. The oil will prevent further rusting. ATF has rust inhibitors in it.

How do I clean 310 dies?

How do I clean 310 dies?

Re: How do I clean 310 dies?

Re: How do I clean 310 dies?

Re: How do I clean 310 dies?

Re: How do I clean 310 dies?

Re: How do I clean 310 dies?

Re: How do I clean 310 dies?