Latest project done, Pictures

Welcome to the Leverguns.Com Forum. This is a high-class place so act respectable. We discuss most anything here ... politely.

Moderators: AmBraCol, Hobie

Forum rules
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.

Please post political post in the new Politics forum.
Post Reply
Chuck 100 yd
Advanced Levergunner
Posts: 6972
Joined: Tue Apr 03, 2007 8:52 pm
Location: Ridgefield WA. USA

Latest project done, Pictures

Post by Chuck 100 yd »

I finally finished my latest project.
A used (1981) Ruger Single Six SS .22 that was handled,shot and never cleaned.
It was pretty scuffed up and filthy but mechanically fine.
I found it at my local dealers and decided it would make a good project gun.
I shortened the barrel to 4 1/4",shortened the ejector housing and related parts.
Replaced the sights,a couple of springs and polished it up and made a new set of
grips for it.
It turned out to be a pretty sweet little shooter. :D
Image
Image
Now to find time to do the same to several other guns I have been holding back "for the day".
Top
User avatar
Pitchy
Advanced Levergunner
Posts: 13146
Joined: Tue Mar 01, 2011 9:15 am
Location: Minnesooooota

Re: Latest project done, Pictures

Post by Pitchy »

Looks great Chuck, nice job. 8)
Because I Can, and Have
-------------------------------------------------------------
USAF-72-76
God Bless America.
Disclaimer, not responsible for anyone copying or building anything i make.
Always consult an expert first.
Top
3leggedturtle
Advanced Levergunner
Posts: 4145
Joined: Fri Dec 21, 2007 11:34 am
Location: north of Palacios about 1400 miles

Re: Latest project done, Pictures

Post by 3leggedturtle »

Thats really nice. 8) Do you have a b4 pic of it? What holster ar you going to make/use for it?
30/30 Winchester: Not accurate enough fer varmints, barely adequate for small deer; BUT In a 10" to 14" barrelled pistol; is good for moose/elk to 200 yards; ground squirrels to 300 metres

250 Savage... its what the 223 wishes it could be...!
Top
salvo
Senior Levergunner
Posts: 1509
Joined: Mon Sep 03, 2007 3:56 pm
Location: Vegas
Contact:
Contact salvo

Re: Latest project done, Pictures

Post by salvo »

Wow, It turned out great Chuck!
Can't wait to see the leather for her.
ScottS

Image

"No arsenal, no weapon in the arsenals of the world, is so formidable as the will and moral courage of free men and women."
-- Ronald Reagan
Top
User avatar
Griff
Posting leader...
Posts: 21016
Joined: Sat Mar 31, 2007 4:56 pm
Location: OH MY GAWD they installed a STOP light!!!

Re: Latest project done, Pictures

Post by Griff »

salvo wrote:Wow, It turned out great Chuck!
Can't wait to see the leather for her.
+1
Griff,
SASS/CMSA #93
NRA Patron
GUSA #93

There is a fine line between hobby & obsession!
AND... I'm over it!!
No I ain't ready, but let's do it anyway!
Top
Chuck 100 yd
Advanced Levergunner
Posts: 6972
Joined: Tue Apr 03, 2007 8:52 pm
Location: Ridgefield WA. USA

Re: Latest project done, Pictures

Post by Chuck 100 yd »

3leggedturtle, I started this one on Thanksgiving day,my wife had the camera up at her
moms house so no before pictures. It was pretty scratched up though. I had to start with
220 grit wet or dry to get them all out and worked up to 600 grit and then to the buffer.
I also turned the billboard off the barrel while I had it in the lathe for shortening and crowning.
:wink:

Any parts I got from Ruger only took 3 days from the time I called them until they arrived.
If you look up the part numbers yourself,ordering from Ruger easy and quick.
I did have to re order one part though. The person I ordered the part from took it down correctly but the guy in the warehouse transposed the number and sent a wrong part. a phone call and three more days later I was back in business.
It was a fun project. :D

Salvo & Griff,Leather to come later. Have many other honey-do`s that will have to come first. :wink:
Top
User avatar
Blaine
Posting leader...
Posts: 30496
Joined: Mon Dec 17, 2007 2:22 pm
Location: Still Deciding

Re: Latest project done, Pictures

Post by Blaine »

I love the short ones.....
The Rotten Fruit Always Hits The Ground First

Proud Life Member Of:
NRA
Second Amendment Foundation
Citizens Committee For The Right To Keep And Bear Arms
DAV
Top
User avatar
Hobie
Moderator
Posts: 13902
Joined: Sat Mar 31, 2007 1:54 pm
Location: Staunton, VA, USA
Contact:
Contact Hobie

Re: Latest project done, Pictures

Post by Hobie »

:mrgreen:
Sincerely,

Hobie

"We are all travelers in the wilderness of this world, and the best that we find in our travels is an honest friend." Robert Louis Stevenson
Top
User avatar
RIHMFIRE
Advanced Levergunner
Posts: 7694
Joined: Fri Sep 07, 2007 11:51 am
Location: Florida

Re: Latest project done, Pictures

Post by RIHMFIRE »

now thats nice!
LETS GO SHOOT'N BOYS
Top
User avatar
FWiedner
Advanced Levergunner
Posts: 8862
Joined: Sat Sep 08, 2007 9:50 pm
Location: North Texas

Re: Latest project done, Pictures

Post by FWiedner »

Ooohhh...shiney...

:o

:mrgreen:
Government office attracts the power-mad, yet it's people who just want to be left alone to live life on their own terms who are considered dangerous.

History teaches that it's a small window in which people can fight back before it is too dangerous to fight back.
Top
User avatar
AJMD429
Posting leader...
Posts: 32800
Joined: Sun Sep 09, 2007 10:03 am
Location: Hoosierland
Contact:
Contact AJMD429

Re: Latest project done, Pictures

Post by AJMD429 »

NICE project. 8)
Doctors for Sensible Gun Laws
"first do no harm" - gun control LAWS lead to far more deaths than 'easy access' ever could.

Want REAL change? . . . . . "Boortz/Nugent in 2012 . . . ! "
Top
pwl44m
Advanced Levergunner
Posts: 3613
Joined: Sat Sep 04, 2010 7:48 pm
Location: East Linda Caif.

Re: Latest project done, Pictures

Post by pwl44m »

Nice job Chuck.! Was the barrell chop Ur choice or did it have flaws ? Looks very good.
Perry
Perry in Bangor----++++===Calif
Top
User avatar
Old Savage
Posting leader...
Posts: 16793
Joined: Mon Sep 03, 2007 3:43 pm
Location: Southern California

Re: Latest project done, Pictures

Post by Old Savage »

Wow looks great! :D
In the High Desert of Southern Calif. ..."on the cutting edge of going back in time"...

Image
Top
User avatar
TedH
Advanced Levergunner
Posts: 8301
Joined: Tue Apr 03, 2007 5:19 pm
Location: Missouri

Re: Latest project done, Pictures

Post by TedH »

Beautiful work! :mrgreen:
NRA Life Member
Top
Chuck 100 yd
Advanced Levergunner
Posts: 6972
Joined: Tue Apr 03, 2007 8:52 pm
Location: Ridgefield WA. USA

Re: Latest project done, Pictures

Post by Chuck 100 yd »

pwl44m , I just like em short best. I have long barrel ones too
and select one of those when hunting or serious about accuracy.
There was nothing wrong with the barrel.

This little gun came from Ruger with an extra cylinder for .22 mag.
that was not with the gun when I bought it. Many of them are lost over the years.
Top
rjohns94
Advanced Levergunner
Posts: 10820
Joined: Thu Sep 06, 2007 6:02 pm
Location: York, PA

Re: Latest project done, Pictures

Post by rjohns94 »

Very nice work. Wow.
Mike Johnson,

"Only those who will risk going too far, can possibly find out how far one can go." T.S. Eliot
Top
User avatar
JReed
Advanced Levergunner
Posts: 5509
Joined: Tue Apr 03, 2007 11:17 am
Location: SoCal

Re: Latest project done, Pictures

Post by JReed »

Purdy :mrgreen:
Jeremy
GySgt USMC Ret

To err is human, To forgive is devine, Neither of which is Marine Corps policy
Semper Fidelis
Top
Nath
Advanced Levergunner
Posts: 8660
Joined: Sat Sep 08, 2007 1:41 pm
Location: England

Re: Latest project done, Pictures

Post by Nath »

Very impressive 8)

N.
Psalm ch8.

Because I wish I could!
Top
Rusty
Advanced Levergunner
Posts: 9528
Joined: Mon Sep 03, 2007 6:37 pm
Location: Central Fla

Re: Latest project done, Pictures

Post by Rusty »

You can usually buy extra cylinders from ebay. I did and mine dropped right in.

Nice job on the polish! :D
If you're gonna be stupid ya gotta be tough-
Isiah 55:8&9

It's easier to fool people than it is to convince them they have been fooled.
Top
92&94
Senior Levergunner
Posts: 1266
Joined: Wed Dec 19, 2012 5:59 pm
Location: New Mexico

Re: Latest project done, Pictures

Post by 92&94 »

Nice work! I like the short ones too.

What is the wood for the new grips?
Top
Chuck 100 yd
Advanced Levergunner
Posts: 6972
Joined: Tue Apr 03, 2007 8:52 pm
Location: Ridgefield WA. USA

Re: Latest project done, Pictures

Post by Chuck 100 yd »

Thanks guys!! :D

92&94 It is some walnut I had laying around.
It is half sapwood but came out looking good. :wink:
Top
Mescalero
Advanced Levergunner
Posts: 6180
Joined: Tue Nov 02, 2010 12:21 pm

Re: Latest project done, Pictures

Post by Mescalero »

Rusty,
That is what I did, inherited it from my mothers husband when he died.
Was not expensive as I recall.
Top
Post Reply

Return to “General Discussion”