.357 max question

Welcome to the Leverguns.Com Forum. This is a high-class place so act respectable. We discuss most anything here ... politely.

Moderators: AmBraCol, Hobie

Forum rules
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.

Please post political post in the new Politics forum.
Post Reply
User avatar
kmittleman
Levergunner 2.0
Posts: 116
Joined: Sun Dec 16, 2007 5:32 pm
Location: Ellicott City, MD
Contact:
Contact kmittleman

.357 max question

Post by kmittleman »

Hey Guys,



I was thinking of having my .357 handi rifle reamed out to .357 max. Would it still be able to shoot .357 mag / .38 sp?

-Kevin
"The greatest trick the devil ever pulled was convincing the world he doesn't exist." - C.S. Lewis
Top
Rusty
Advanced Levergunner
Posts: 9528
Joined: Mon Sep 03, 2007 6:37 pm
Location: Central Fla

Re: .357 max question

Post by Rusty »

Yes, it will be like .38's in a 357.

Check out graybeard's outdoor forums for all things Handi. They have their own section there.

http://www.go2gbo.com/forums/index.php?board=126.0

.357 Max is one of the most popular mods there. The .357 mag Handi's have a habit of being long throated to the point that a .360 Wesson might fit right from the factory.
If you're gonna be stupid ya gotta be tough-
Isiah 55:8&9

It's easier to fool people than it is to convince them they have been fooled.
Top
User avatar
AJMD429
Posting leader...
Posts: 33426
Joined: Sun Sep 09, 2007 10:03 am
Location: Hoosierland

Re: .357 max question

Post by AJMD429 »

Some of the Handi's are different frames, and have 'shotgun' style firing-pin holes, and primers of the much-higher-pressure .357 Maximum rounds supposedly can extrude back into the action.

Graybeard has a whole section on telling the two kinds of receivers apart.
It's 2025 - "Cutesy Time is OVER....!" [Dan Bongino]
Top
stretch
Advanced Levergunner
Posts: 2366
Joined: Wed Oct 03, 2007 7:15 pm

Re: .357 max question

Post by stretch »

The main problem with the 357 Max in revolvers was
flame-cutting of the top strap.

I'd think a Handi-Rifle would be a superb platform for
conversion to 357 Max. I didn't know about the firing
pin hole issue; but that aside, I vote you perform
the surgery and report back!

The 357 Max in a 14" Contender barrel is said to give near
1700fps with a 200 gr. bullet. Might the HandiRfile approach
2000? That's getting into 35 Remington territory!

And as others have said, 38 special and 357 mag should
work just fine.

-Stretch
Top
User avatar
Hobie
Moderator
Posts: 13902
Joined: Sat Mar 31, 2007 1:54 pm
Location: Staunton, VA, USA
Contact:
Contact Hobie

Re: .357 max question

Post by Hobie »

You COULD use the .38 Colt cartridge if you wanted. I have a Max on a Contender as a carbine. Great chambering.
Sincerely,

Hobie

"We are all travelers in the wilderness of this world, and the best that we find in our travels is an honest friend." Robert Louis Stevenson
Top
Thunder50
Senior Levergunner
Posts: 1185
Joined: Mon Sep 10, 2007 10:18 pm
Location: Colorado

Re: .357 max question

Post by Thunder50 »

I can get 2200fps with a 200gr cast bullet in my 357max rifle. It is a very worthwhile conversion.
The meek shall inherit the earth, but I reserve the mineral rights!
All the knowledge in the world, is of no use to fools! (Eagles-long road out of Eden)
Top
stretch
Advanced Levergunner
Posts: 2366
Joined: Wed Oct 03, 2007 7:15 pm

Re: .357 max question

Post by stretch »

I can get 2200fps with a 200gr cast bullet in my 357max rifle.
THAT is no longer approaching 35 Remington territory - that IS 35
Remington territory!!

Now ya got ME thinkin'....

-Stretch
Top
awp101
Advanced Levergunner
Posts: 5670
Joined: Mon Apr 09, 2007 7:13 pm
Location: DeeDee Snavely's Used Guns and Weapons

Re: .357 max question

Post by awp101 »

Hobie wrote:You COULD use the .32 Colt cartridge if you wanted.
Huh? What's the connection between the .32 Colt and the .357 Max?

If it's obvious, be gentle please. I'm suffering from a NyQuil induced fog...:lol:
Nothing so needs reforming as other people's habits.
-Mark Twain

Proverbs 3:5; Philippians 4:13

Got to have a Jones for this
Jones for that
This running with the Joneses boy
Just ain't where it's at
Top
Cast Bullet Hunter
Levergunner 2.0
Posts: 235
Joined: Tue Dec 18, 2007 2:51 pm
Location: Sandy, Utah

Re: .357 max question

Post by Cast Bullet Hunter »

awp101 wrote:
Hobie wrote:You COULD use the .32 Colt cartridge if you wanted.
Huh? What's the connection between the .32 Colt and the .357 Max?

If it's obvious, be gentle please. I'm suffering from a NyQuil induced fog...:lol:
It's called sarcasm son. :mrgreen: :mrgreen: :mrgreen: :mrgreen:

Cute, Hobie.
Top
User avatar
Hobie
Moderator
Posts: 13902
Joined: Sat Mar 31, 2007 1:54 pm
Location: Staunton, VA, USA
Contact:
Contact Hobie

Re: .357 max question

Post by Hobie »

awp101 wrote:
Hobie wrote:You COULD use the .32 Colt cartridge if you wanted.
Huh? What's the connection between the .32 Colt and the .357 Max?

If it's obvious, be gentle please. I'm suffering from a NyQuil induced fog...:lol:
Nobody EVER makes a typographical error, do they? I've caught and corrected it...
Sincerely,

Hobie

"We are all travelers in the wilderness of this world, and the best that we find in our travels is an honest friend." Robert Louis Stevenson
Top
User avatar
Hobie
Moderator
Posts: 13902
Joined: Sat Mar 31, 2007 1:54 pm
Location: Staunton, VA, USA
Contact:
Contact Hobie

Re: .357 max question

Post by Hobie »

Cast Bullet Hunter wrote:
awp101 wrote:
Hobie wrote:You COULD use the .32 Colt cartridge if you wanted.
Huh? What's the connection between the .32 Colt and the .357 Max?

If it's obvious, be gentle please. I'm suffering from a NyQuil induced fog...:lol:
It's called sarcasm son. :mrgreen: :mrgreen: :mrgreen: :mrgreen:

Cute, Hobie.
If it was sarcasm it wouldn't have been too bad an effort. I try not to go that route though. It is so hard to perceive through the fog of the internet without one's facial expression or tone of voice.
Sincerely,

Hobie

"We are all travelers in the wilderness of this world, and the best that we find in our travels is an honest friend." Robert Louis Stevenson
Top
awp101
Advanced Levergunner
Posts: 5670
Joined: Mon Apr 09, 2007 7:13 pm
Location: DeeDee Snavely's Used Guns and Weapons

Re: .357 max question

Post by awp101 »

OK, that makes more sense... :lol:

My addled synapse kept trying to make a connection there and it just wasn't happening! :lol:
Nothing so needs reforming as other people's habits.
-Mark Twain

Proverbs 3:5; Philippians 4:13

Got to have a Jones for this
Jones for that
This running with the Joneses boy
Just ain't where it's at
Top
foxtrapper
Levergunner 2.0
Posts: 420
Joined: Wed Sep 12, 2007 9:45 am
Location: Long Island N.Y.

Re: .357 max question

Post by foxtrapper »

I have a Ruger Bisley 357 that is rechambered to 356 GNR. It is a 41 mag case necked down to 357. The rechamber is easy, case forming too! It also can be had in a lever gun. Very accurate with Hornady 158gr. Xtp.
Top
Mainehunter
Senior Levergunner
Posts: 1026
Joined: Thu Sep 06, 2007 5:57 pm
Location: Central Maine

Re: .357 max question

Post by Mainehunter »

foxtrapper wrote:I have a Ruger Bisley 357 that is rechambered to 356 GNR. It is a 41 mag case necked down to 357. The rechamber is easy, case forming too! It also can be had in a lever gun. Very accurate with Hornady 158gr. Xtp.
I have been SOOO wanting to do a 356 GNR conversion on a Marlin lever for a long time. That would be the "cats meow" where I hunt up north.

Mainehunter :wink:
Top
foxtrapper
Levergunner 2.0
Posts: 420
Joined: Wed Sep 12, 2007 9:45 am
Location: Long Island N.Y.

Re: .357 max question

Post by foxtrapper »

Mainehunter wrote:
foxtrapper wrote:I have a Ruger Bisley 357 that is rechambered to 356 GNR. It is a 41 mag case necked down to 357. The rechamber is easy, case forming too! It also can be had in a lever gun. Very accurate with Hornady 158gr. Xtp.
I have been SOOO wanting to do a 356 GNR conversion on a Marlin lever for a long time. That would be the "cats meow" where I hunt up north.

Mainehunter :wink:
Mainehunter if you would like a couple of formed cases,you know ,to help the thought process, just shoot me a address and I will drop them in the mail.
Top
BAGTIC
Levergunner 3.0
Posts: 648
Joined: Wed Sep 12, 2007 5:37 pm

Re: .357 max question

Post by BAGTIC »

I have a Handi-Rifle that was factory chambered in .357 Maximum. I shoot .38 Special, .357 Magnum and .357 Maximum. I even shoot round balls from .357 magnum cases.
Top
User avatar
AJMD429
Posting leader...
Posts: 33426
Joined: Sun Sep 09, 2007 10:03 am
Location: Hoosierland

Re: .357 max question

Post by AJMD429 »

foxtrapper wrote:I have a Ruger Bisley 357 that is rechambered to 356 GNR. It is a 41 mag case necked down to 357. The rechamber is easy, case forming too! It also can be had in a lever gun. Very accurate with Hornady 158gr. Xtp.
How about a .357/44 Bain & Davis - stock .44 Mag Marlins are widely available, and the case would have even more capacity to get closer to the high-pressure .357 Max ballistics. I wonder if there's a practical .357-bulleted round based on a .45 Colt...?
It's 2025 - "Cutesy Time is OVER....!" [Dan Bongino]
Top
pbslinger
Levergunner
Posts: 23
Joined: Sun Dec 23, 2007 10:19 pm

Re: .357 max question

Post by pbslinger »

My Dan Wesson 357 SuperMags shoot 38 Special wadcutters just fine.
Top
User avatar
O.S.O.K.
Advanced Levergunner
Posts: 5533
Joined: Sun Apr 27, 2008 4:15 pm
Location: Deep in the Piney Woods of Mississippi

Re: .357 max question

Post by O.S.O.K. »

I would think that would be a great mod and very easy to do.
NRA Endowment Life
Phi Kappa Sigma, Alpha Phi 83 "Skulls"
OCS, 120th MP Battalion, MSSG
MOLON LABE!
Top
Post Reply

Return to “General Discussion”