Forum rules
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
Took some pics today of an Egyptian contract roller that I did the metal work on for a friend of mine.
34" Green Mountain barrel chambered in 50-90 Sharps. 1+1/4" full octagon.
Lee Shaver economy soule rear sight and lyman front.
Treebone wood and rear steel buttplate. Made new pivot pins and bushed the firing pin hole to .078"
He is still working on loads so no range report yet
Very nice Rolling Block....should give a life time of shooting.
One of these days, I'll run across a Rolling Block action at a reasonable price, and it will come home with me. I'd love to have a classic like your's sitting in my gun rack.
Lobo in West Virginia
Old List Veteran..Five Years..Five Hundred Posts
I built a #5 into a target gun, never finished inletting and sanding the wood. I finally decided I wasn't gonna do it, and sent it to a friend who will. I hope mine looks half that nice when it comes back
