bore
Forum rules
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
bore
Some time ago I found a .358 Savage 99 in my gunsmiths junk pile.
The bore has stuff in it, I have been gentle with it.
The most aggressive thing I have used in it has been J.B. bore paste.
Anybody have a suggestion about something to clean up this bore without harming it?
The bore has stuff in it, I have been gentle with it.
The most aggressive thing I have used in it has been J.B. bore paste.
Anybody have a suggestion about something to clean up this bore without harming it?
-
- Advanced Levergunner
- Posts: 5670
- Joined: Mon Apr 09, 2007 7:13 pm
- Location: DeeDee Snavely's Used Guns and Weapons
Re: bore
What kind of stuff? Copper fouling or leading? Small animals?
I used one of the foaming bore cleaners on a GEW88 and cleaned it up nice. Just can't remember which one I used...
I used one of the foaming bore cleaners on a GEW88 and cleaned it up nice. Just can't remember which one I used...
Nothing so needs reforming as other people's habits.
-Mark Twain
Proverbs 3:5; Philippians 4:13
Got to have a Jones for this
Jones for that
This running with the Joneses boy
Just ain't where it's at
-Mark Twain
Proverbs 3:5; Philippians 4:13
Got to have a Jones for this
Jones for that
This running with the Joneses boy
Just ain't where it's at
Re: bore
I think( ok we are already in trouble )
that someone who had it before, decided to shoot cast bullets at reloading manual published velocities for jacketed bullets.
that someone who had it before, decided to shoot cast bullets at reloading manual published velocities for jacketed bullets.
- Old Savage
- Posting leader...
- Posts: 16793
- Joined: Mon Sep 03, 2007 3:43 pm
- Location: Southern California
Re: bore
CR 10
Re: bore
How to obtain?
- Old Savage
- Posting leader...
- Posts: 16793
- Joined: Mon Sep 03, 2007 3:43 pm
- Location: Southern California
Re: bore
CR10 is easy to get - I get it at the gun shop.
Re: bore
You are going to pay for this one day!!!!!!!!!!!!!!
Re: bore
dry the bore well,
wrap some of this around a bore brush,
http://www.walgreens.com/store/c/chore- ... r_the_Home
run inside bore,
lead comes out.
wrap some of this around a bore brush,
http://www.walgreens.com/store/c/chore- ... r_the_Home
run inside bore,
lead comes out.
careful what you wish for, you might just get it.
"BECAUSE I CAN"
"BECAUSE I CAN"
Re: bore
I will reserve judgement untill I actually do it.
But on the surface it seems you are absolutly brillant.
But on the surface it seems you are absolutly brillant.
- AJMD429
- Posting leader...
- Posts: 32800
- Joined: Sun Sep 09, 2007 10:03 am
- Location: Hoosierland
- Contact:
Re: bore
Is that better/different than the bronze-wool you can get from Brownell's (or the local ACE hardware)...? I've found that stuff inexpensive and very helpful in the gun room.pokey wrote:dry the bore well, wrap some of this around a bore brush,
http://www.walgreens.com/store/c/chore- ... r_the_Home
run inside bore, lead comes out.
Doctors for Sensible Gun Laws
"first do no harm" - gun control LAWS lead to far more deaths than 'easy access' ever could.
Want REAL change? . . . . . "Boortz/Nugent in 2012 . . . ! "
"first do no harm" - gun control LAWS lead to far more deaths than 'easy access' ever could.
Want REAL change? . . . . . "Boortz/Nugent in 2012 . . . ! "
Re: bore
i don't know of the bronze wool.AJMD429 wrote:Is that better/different than the bronze-wool you can get from Brownell's (or the local ACE hardware)...? I've found that stuff inexpensive and very helpful in the gun room.pokey wrote:dry the bore well, wrap some of this around a bore brush,
http://www.walgreens.com/store/c/chore- ... r_the_Home
run inside bore, lead comes out.
i do know the ALL COPPER chore boy works well.
careful what you wish for, you might just get it.
"BECAUSE I CAN"
"BECAUSE I CAN"
-
- Senior Levergunner
- Posts: 1459
- Joined: Wed Feb 06, 2008 6:31 pm
- Location: Arizona Territory
Re: bore
Make sure you buy the all Copper Chore Boy, not the plated steel. The best indication is the Copper will be twice the price of the plated steel scrubber.
Wrap strands around an old bronze bore brush, keep it dry and go at it. Once you get most of the lead out, switch to Hoppes & Kroil a 50-50 mixture. I use an old bore mop for this application. Let it set & soak over night, repeat as necessary. Then Lastly, follow-up with J-B bore paste.
I have a Chex-Mauser 98 V-22 made in 1929, the bore looked very bad. Not leaded but very much fouled. I pulled 70 Years of grud out of that bore. I thought I'd never get all the Green & blue out of the bore. It now shoots acceptable groups at 200 yards.
Wrap strands around an old bronze bore brush, keep it dry and go at it. Once you get most of the lead out, switch to Hoppes & Kroil a 50-50 mixture. I use an old bore mop for this application. Let it set & soak over night, repeat as necessary. Then Lastly, follow-up with J-B bore paste.
I have a Chex-Mauser 98 V-22 made in 1929, the bore looked very bad. Not leaded but very much fouled. I pulled 70 Years of grud out of that bore. I thought I'd never get all the Green & blue out of the bore. It now shoots acceptable groups at 200 yards.
SASS# 51223
Arizona Cowboy Shooter's Assoc.
Cowtown Cowboy Shooter's Assoc.
Uberti 73/44-40 carbine, Rossi 92/44-40,
Marlin 94CB/44 24" Limited, Winchester 94/30-30
Arizona Cowboy Shooter's Assoc.
Cowtown Cowboy Shooter's Assoc.
Uberti 73/44-40 carbine, Rossi 92/44-40,
Marlin 94CB/44 24" Limited, Winchester 94/30-30
-
- Levergunner 3.0
- Posts: 806
- Joined: Thu Apr 03, 2008 8:10 pm
- Location: Simpsonville,SC
Re: bore
In the past I have cleaned up some pretty nasty milsurp rifle bores using an electric bore cleaning which utilizes reverse electrolysis.These are easy to make from any old recharger of proper DC voltage output and a simple piece of steel rod and will clean out an unbelievable amount of stuff in just a few hours.If you have ever seen a milsurp rifle bore which has not been properly cleaned after firing corrosive military ammo you will know how they can seem like lost.
Stan in SC
Stan in SC
The more I listen,the more I hear....and vice versa.
45-70,it's almost a religion
45-70,it's almost a religion
Re: bore
Stan maybe detailed instructions with a few pictures of your set up would help.
If you're gonna be stupid ya gotta be tough-
Isiah 55:8&9
It's easier to fool people than it is to convince them they have been fooled.
Isiah 55:8&9
It's easier to fool people than it is to convince them they have been fooled.
-
- Advanced Levergunner
- Posts: 6747
- Joined: Thu Mar 19, 2009 9:30 am
- Location: Lower Central NYS
Re: bore
Get a can of "Wipe Out" and liberally spray into the barrel,seal end of barrel so it can work over night and next day carefully run a couple dry patches down it. If this does the trick run a lightly oiled patch down it(Rem Oil) afterwards and leave it that way until you plan to shoot it(then use a clean dry patch)
I have seen that Wipe Out remove very nasty stuff
I have seen that Wipe Out remove very nasty stuff
Re: bore
A patch with some Brasso on it will work wonders.
"I have reached up to the gun rack and taken down the .30/30 carbine by some process of natural selection, not condoned perhaps by many experts but easily explained by those who spend long periods in the wilderness areas."~Calvin Rutstrum~
"You come to the swamp, you better leave your skirt at the house"~Dave Canterbury~
"You come to the swamp, you better leave your skirt at the house"~Dave Canterbury~
- J Miller
- Member Emeritus
- Posts: 14890
- Joined: Sat Mar 31, 2007 7:46 pm
- Location: Not in IL no more ... :)
Re: bore
If it's lead I'd use the copper / bronze scrubbers wrapped around an old brush.
But, use it dry. I've found that when using it with solvent the solvent acts as a lubricant and the scrubbers just slide right over.
Do it dry and the strip the lead right out.
Joe
But, use it dry. I've found that when using it with solvent the solvent acts as a lubricant and the scrubbers just slide right over.
Do it dry and the strip the lead right out.
Joe
Last edited by J Miller on Tue Jun 21, 2011 11:15 am, edited 1 time in total.
***Be sneaky, get closer, bust the cap on him when you can put the ball where it counts .***
Re: bore
I use Chore Boy (on real bad leaded bores) and Wipe Out (liquid version) exclusively. Chore Boy can also be used to remove surface rust (oil surface first) w/o harming the bluing. I know I have sung the praises of Wipe Out before, but if you havn't - give it a try.
http://www.pumprifle.org/
Bruce Hamlin's Pump Rifle Forum
Bruce Hamlin's Pump Rifle Forum
Re: bore
Like earlier suggested, CR-10 - here's a link http://barnesbullets.myshopify.com/prod ... eaner-8-oz .
I use CR-10 per the directions, then run a wet patch of Hoppe's #9, followed by a dry patch , and I'm done.
I use CR-10 per the directions, then run a wet patch of Hoppe's #9, followed by a dry patch , and I'm done.
Re: bore
When shopping for Chore Boy pads take a magnet along to test for the copper plated steel impostors.
..
..
-
- Levergunner 3.0
- Posts: 806
- Joined: Thu Apr 03, 2008 8:10 pm
- Location: Simpsonville,SC
Re: bore
Rusty,
Here is one you tube piece on doing this.There are several to be viewed.Here's the link.
http://www.youtube.com/watch?v=S32C4SJ- ... re=related
Stan in SC
Here is one you tube piece on doing this.There are several to be viewed.Here's the link.
http://www.youtube.com/watch?v=S32C4SJ- ... re=related
Stan in SC
The more I listen,the more I hear....and vice versa.
45-70,it's almost a religion
45-70,it's almost a religion