Trapper in a Safe?
Forum rules
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
-
- Levergunner 1.0
- Posts: 69
- Joined: Sun Jan 02, 2011 8:53 am
- Location: NORTH TOLEDO BEND LAKE IN EAST TEXAS
Trapper in a Safe?
This may have covered before but I couldn't find a thing on it. In my safe I have several guns with 20" or longer barrels that fit just fine. I have a 9422m Trapper that when you set it in the safe, the barrel don't reach the upper landing to hold the gun. Does anyone else have this problem and how have y'all fixed it? I could just put some bricks in there and go about my way but I take pride in my stuff. I want it to look good inside my safe when I open it. Someone may see in it and I want it to be organized. Levers here, Bolts actions here, Pumps here, Pistols here, etc.
Just was wondering what y'all have done.
Thanks
kenken
Just was wondering what y'all have done.
Thanks
kenken
Re: Trapper in a Safe?
go get a carbon arrow and stick in the barrel....
with an insert where the broadhead would be...or
I have seen some use wooden dowels...but wood will hold moisture...
with an insert where the broadhead would be...or
I have seen some use wooden dowels...but wood will hold moisture...
Last edited by RIHMFIRE on Sun May 22, 2011 2:39 pm, edited 2 times in total.
LETS GO SHOOT'N BOYS
Re: Trapper in a Safe?
I had rifles and carbines that either because of the sights (scopes) that were mounted or because of shorter barrel length (Trappers) did not fit well into any rack I had.
Seems to me that blocks in a safe would take up a lot of floor space unless you have more than one gun that you're having the problem with. I tried leaning them against the wall of my safe with padding, but it wasn't a good solution.
When I built my new 10-gun rack I addressed those issues as part of the design. Made the case deeper and the barrel rest lower.
Seems to me that blocks in a safe would take up a lot of floor space unless you have more than one gun that you're having the problem with. I tried leaning them against the wall of my safe with padding, but it wasn't a good solution.
When I built my new 10-gun rack I addressed those issues as part of the design. Made the case deeper and the barrel rest lower.
Government office attracts the power-mad, yet it's people who just want to be left alone to live life on their own terms who are considered dangerous.
History teaches that it's a small window in which people can fight back before it is too dangerous to fight back.
History teaches that it's a small window in which people can fight back before it is too dangerous to fight back.
Re: Trapper in a Safe?
In my cabinet, or should say Mod71alaska's cabinet, the trapper sits on several boxes of ammo for that caliber. works just fine for me. I use this for my TDS, my Car-15, and soon for my NKJ trapper .44.
Mike Johnson,
"Only those who will risk going too far, can possibly find out how far one can go." T.S. Eliot
"Only those who will risk going too far, can possibly find out how far one can go." T.S. Eliot
-
- Levergunner 1.0
- Posts: 69
- Joined: Sun Jan 02, 2011 8:53 am
- Location: NORTH TOLEDO BEND LAKE IN EAST TEXAS
Re: Trapper in a Safe?
My safe is a Liberty and the barrel landing is not adjustable with the middle divider that is in it. I don't think that it will sit on boxes of 22mag bullets very well also.
Thanks for the input.
kenken
Thanks for the input.
kenken
Re: Trapper in a Safe?
This works. Or a piece of brazing rod cut to length and bent into a closed hook "J" at the muzzle end.RIHMFIRE wrote:go get a carbon arrow and stick in the barrel....
with an insert where the broadhead would be....
Rob
Proud to be Christian American and not ashamed of being white.
May your rifle always shoot straight, your mag never run dry, you always have one more round than you have adversaries, and your good mate always be there to watch your back.
Because I can!
Never grow a wishbone where a backbone ought to be.
May your rifle always shoot straight, your mag never run dry, you always have one more round than you have adversaries, and your good mate always be there to watch your back.
Because I can!
Never grow a wishbone where a backbone ought to be.
Re: Trapper in a Safe?
I keep most of my collectable folding knives inside a .50-cal ammo can. I keep that ammo can against the back of my vault with a piece of carpet velcro'ed to the its top. Then I use the ammo can as a platform to set my extra-short rifles on.
Politicians and diapers both require frequent changing for the EXACT same reason!
- J Miller
- Member Emeritus
- Posts: 14890
- Joined: Sat Mar 31, 2007 7:46 pm
- Location: Not in IL no more ... :)
Re: Trapper in a Safe?
A piece of acetel (plastic) rod will work as well. Won't attract moisture and won't hurt anything else. Not sure where to suggest getting it though. Will ask wife when she gets home if she knows of a local source.
She gets all hers through mail order.
Joe
She gets all hers through mail order.
Joe
***Be sneaky, get closer, bust the cap on him when you can put the ball where it counts .***
- Griff
- Posting leader...
- Posts: 21016
- Joined: Sat Mar 31, 2007 4:56 pm
- Location: OH MY GAWD they installed a STOP light!!!
Re: Trapper in a Safe?
I set mine off to the side. Leanin' up and the first thing out and the last one back in.
Griff,
SASS/CMSA #93
NRA Patron
GUSA #93
There is a fine line between hobby & obsession!
AND... I'm over it!!
No I ain't ready, but let's do it anyway!
SASS/CMSA #93
NRA Patron
GUSA #93
There is a fine line between hobby & obsession!
AND... I'm over it!!
No I ain't ready, but let's do it anyway!
-
- Advanced Levergunner
- Posts: 4443
- Joined: Wed Sep 12, 2007 12:33 pm
- Location: Wyoming and Arizona
Re: Trapper in a Safe?
Have been using a brass rod for years, works fine.
Re: Trapper in a Safe?
If you have a custom golf club making shop close by, see if the clubmaker has some old graphite golf shafts. If you can get some shafts designed for woods, their tip diameter will be .335 of an inch and you can sand them on a belt sander to mak'em fit smaller calibers. In my shop I always had plenty of old ones I might never use and would have been glad to give away a few for tomato stakes or whatever.
T.
T.
Last edited by Topside on Tue May 24, 2011 12:01 pm, edited 1 time in total.
"A righteous man has regard for the life of his beast."
--Proverbs 12:10
--Proverbs 12:10
- Ysabel Kid
- Moderator
- Posts: 28220
- Joined: Mon Sep 17, 2007 7:10 pm
- Location: South Carolina, USA
- Contact:
Re: Trapper in a Safe?
My safe is large enough that I have two sections. One for "tall" or long firearms, and the other side for carbines and shorter longarms. Works pretty well!
-
- Senior Levergunner
- Posts: 1002
- Joined: Tue Dec 11, 2007 1:28 pm
- Location: Arkansas Ozark Mts
Re: Trapper in a Safe?
http://www.storemoreguns.com This outfit is the ticket for gaining more room in your safe. Can simply and quickly accomodate storage of various barrel lengths. A close friend picked one of the kits at the Tulsa Show. I'm impressed how easy it solved the problem of his crowded, disorganized gun safe.
"If a man does away with his traditional way of living and throws away his good customs, he had better first make certain that he has something of value to replace them." - Basuto proverb.
Re: Trapper in a Safe?
Had the same problem, one day at work a while back I was shipped my new laptop with a piece of eggcrate foam in the box. Works like a charm, they don't slip and will not mar a thing.
Ryan
Ryan
- AJMD429
- Posting leader...
- Posts: 32800
- Joined: Sun Sep 09, 2007 10:03 am
- Location: Hoosierland
- Contact:
Re: Trapper in a Safe?
I've got a shorter safe with a lower shelf, so I'll be glad to store that Trapper for you, if you want...
Doctors for Sensible Gun Laws
"first do no harm" - gun control LAWS lead to far more deaths than 'easy access' ever could.
Want REAL change? . . . . . "Boortz/Nugent in 2012 . . . ! "
"first do no harm" - gun control LAWS lead to far more deaths than 'easy access' ever could.
Want REAL change? . . . . . "Boortz/Nugent in 2012 . . . ! "
Re: Trapper in a Safe?
Box of Quaker oats works & cereal absorbs humidity. Change out x6mos. Feed to dog -- they're nasty with all that moisture in them.
Re: Trapper in a Safe?
I can't keep my safe nice and tidy too many guns for em' all to fit right I need a bigger safe.
Rich
- Sixgun
- Posting leader...
- Posts: 19243
- Joined: Sun Sep 16, 2007 7:17 pm
- Location: S.E. Pa. Where The Finest Winchesters & Colts Reside
Re: Trapper in a Safe?
Yea, me too. I took the 10 cent factory rifle racks out of the safe and burned 'em in the wood stove. Made my own out of oak. It was simple. I cut a mess of oak boards that were about 1 and 1/2" X 1" and made a "box" that fits very snuggly to the walls of the safe. There's 3 rows across with a notch cut out every 3". I can slide this up or down in the safe to accomodate rifles with barrels any length.----------Sixgun
Re: Trapper in a Safe?
Sixgun, could you post a picture of that setup?Sixgun wrote:Yea, me too. I took the 10 cent factory rifle racks out of the safe and burned 'em in the wood stove. Made my own out of oak. It was simple. I cut a mess of oak boards that were about 1 and 1/2" X 1" and made a "box" that fits very snuggly to the walls of the safe. There's 3 rows across with a notch cut out every 3". I can slide this up or down in the safe to accomodate rifles with barrels any length.----------Sixgun
Dave in TX
MA1 USN (Retired)
Freedom is never really free, payments come due in every generation.
Freedom is never really free, payments come due in every generation.
Re: Trapper in a Safe?
The shorties hang on the door
ScottS
"No arsenal, no weapon in the arsenals of the world, is so formidable as the will and moral courage of free men and women."
-- Ronald Reagan
"No arsenal, no weapon in the arsenals of the world, is so formidable as the will and moral courage of free men and women."
-- Ronald Reagan
- AJMD429
- Posting leader...
- Posts: 32800
- Joined: Sun Sep 09, 2007 10:03 am
- Location: Hoosierland
- Contact:
Re: Trapper in a Safe?
I also removed the 'built-in' rack, and replaced it with these; they allow variable-length guns to be easily secured, PLUS don't take up as much room for the rack itself. Having the dowels angled towards the front at the top makes it much easier to slip a gun in and out without feeling like everything has to shift around or like I'm snaking a china goblet out from behind a bunch of others.
I put one on left and right sides, and was deciding on a freestanding one up the middle, or just another across the back with non-angled dowels, but instead I found it easier to just put seldom-used guns 'out in the middle', slipped into gun-socks; the frequent-flyers go in the racks.
I put one on left and right sides, and was deciding on a freestanding one up the middle, or just another across the back with non-angled dowels, but instead I found it easier to just put seldom-used guns 'out in the middle', slipped into gun-socks; the frequent-flyers go in the racks.
Doctors for Sensible Gun Laws
"first do no harm" - gun control LAWS lead to far more deaths than 'easy access' ever could.
Want REAL change? . . . . . "Boortz/Nugent in 2012 . . . ! "
"first do no harm" - gun control LAWS lead to far more deaths than 'easy access' ever could.
Want REAL change? . . . . . "Boortz/Nugent in 2012 . . . ! "
-
- Levergunner 1.0
- Posts: 69
- Joined: Sun Jan 02, 2011 8:53 am
- Location: NORTH TOLEDO BEND LAKE IN EAST TEXAS
Re: Trapper in a Safe?
Hey Sixgun,
Let me see what you are talking about, that you have done.
kenken
Let me see what you are talking about, that you have done.
kenken
- Sixgun
- Posting leader...
- Posts: 19243
- Joined: Sun Sep 16, 2007 7:17 pm
- Location: S.E. Pa. Where The Finest Winchesters & Colts Reside
Re: Trapper in a Safe?
Self Explanitory---Sixgun
Last edited by Sixgun on Thu May 26, 2011 8:03 pm, edited 1 time in total.
-
- Levergunner 1.0
- Posts: 69
- Joined: Sun Jan 02, 2011 8:53 am
- Location: NORTH TOLEDO BEND LAKE IN EAST TEXAS
Re: Trapper in a Safe?
Outstanding. I am speechless. Is this a personal collection?
kenken
kenken
- AJMD429
- Posting leader...
- Posts: 32800
- Joined: Sun Sep 09, 2007 10:03 am
- Location: Hoosierland
- Contact:
Re: Trapper in a Safe?
Rumor has it they're all life-size styrofoam models, or perhaps the 'safe' is only 8" tall, and they're all plastic ones from the Ken & Barbie Cowboy doll collection...kenken0269 wrote:Outstanding. I am speechless. Is this a personal collection?
Doctors for Sensible Gun Laws
"first do no harm" - gun control LAWS lead to far more deaths than 'easy access' ever could.
Want REAL change? . . . . . "Boortz/Nugent in 2012 . . . ! "
"first do no harm" - gun control LAWS lead to far more deaths than 'easy access' ever could.
Want REAL change? . . . . . "Boortz/Nugent in 2012 . . . ! "